Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
News
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
Top searches:
ARDUINO NANO POTENTIOMETER 7805 ATMEGA LM2596 BATTERY ARDUINO OLED SWITCH ESP8266 MOSFET 7 SEGMENT TERMINAL BLOCK SD CARD RELAY AMS1117 CONNECTOR LCD 1N4007 TRANSFORMER POLOLU MOTOR JST ATMEGA328P 433 MHZ
Ohter interesting searches:
HIROSE LM3886 ARDUINO UNO HX711 HIROSE PHOENIX ATX CONNECTOR FUSE 40106 EP2 GPS ANTENNA QFN BUTTON USB GPS DISPLAY ATMEL VISHAY CON IRF LM393 HEADER ATMEGA328 420
- Home
- World of EAGLE Libraries
- Library Structure
EAGLE Library Structure
File details
File name: | transistor IGBT.lbr |
Uploaded by: | kylie |
Download options: | Download original file from DIYmodules.org ( 73.0 KiB )Download file converted to the latest EAGLE format ( 73.0 KiB ) |
Library description
based on the original libraries (created by librarian@cadsoft.de ):
transistor-power.lbr
transistor-fet.lbr (checked by R. Vogg, 15.03.2002)
These libraries are rearanged by kylie because
elimination of package doubles (same layout, but different names)
elimination of symbol doubles (same electrical function, but different names)
elimination of device doubles (same device, but located in two or more libraries)
unification/renaming of symbols, packages
renaming of packages to most commonly used names/codes (TO-xxx, SOTxxx, ...), if possible according to JEDEC
if avialable: adding of package code variants (JEDEC, JEITA/EIAJ, manufacturer's code, ...) in description (SOT23 = EIAJ SC-59 = JEDEC TO-236AB = Rohm SMT3 = IR Micro3)
adding of package variants with pad names according to the transistor type (bipolar: TO-220_BCE ; FET: TO-220_GDS ; ...)
adding of package variants for different mounting cases, especially for power transistors (horizontal: TO-220_yyy_H ; vertical: TO-220_yyy_V )
The author do not warrant that this library is free from error or will meet your specific requirements.
Updates:
12.2018/01.2019: library generation
List of devices
Name & variants | Symbol | Package |
---|---|---|
IRG4BC15UD |
IGBT with ultrafast soft recovery diode
|
|
Variants: |
||
IXG?*N170 | IGBT, high voltage TO268_GCE ; TO247_GCE | |
Variants: |
||
IXLF19N250 |
IGBT, high voltage Source: http://www.ixys.com/l414.pdf |
|
Variants: |
List of symbols
Name | View | Description |
---|---|---|
IGBT-N1 | Insulated gate bipolar transistor, N-type, pin names Gate-Collector-Emitter body diode symbol conform to IEC617 | |
IGBT-N2 | Insulated gate bipolar transistor, N-type, pin names Gate-Collector-Emitter | |
IGBT-P1 | Insulated gate bipolar transistor, P-type, pin names Gate-Collector-Emitter body diode symbol conform to IEC617 | |
IGBT-P2 | Insulated gate bipolar transistor, P-type, pin names Gate-Collector-Emitter |
List of packages
Name | View | Description |
---|---|---|
D2PAK_GCE | Small outline transistor, pad names 1:G-2.2:C-3:E, reflow soldering package/pad dimensions according to IPC-SM-782, RLP No. 236, component identifier TS-005 (pad No. 2.1 is not placed in this case between pads No. 1 and 3, but pad numbering according to its present) EIAJ / JEITA Code: SC-83 other notations: D2-PAK, DDPAK, DD-PAK, SC83, TO263AB, TO-263AB | |
D2PAK_GCE_(IRF) | Small outline transistor, pad names 1:G-2.2:C-3:E, reflow soldering Source of package/pad dimensions: IRF, Vishay (pad No. 2.1 is not placed in this case between pads No. 1 and 3, but pad numbering according to its present) EIAJ / JEITA Code: SC-83 other notations: D2-PAK, DDPAK, DD-PAK, SC83, TO263AB, TO-263AB | |
I2PAK_GCE_(IRF)_H1 | I2PAK, horizontal, pad names 1:G-2:C-3:E Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GCE_(IRF)_H2 | I2PAK, horizontal, pad names 1:G-2:C-3:E Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GCE_(IRF)_H3 | I2PAK, horizontal, pad names 1:G-2:C-3:E Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GCE_(IRF)_H4 | I2PAK, horizontal, pad names 1:G-2:C-3:E Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GCE_(IRF)_H5 | I2PAK, horizontal, "pin header" solder terminals, pad names 1:G-2:C-3:E solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor Bürklin: 07F820 Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GCE_V1 | I2PAK, vertical, pad names 1:G-2:C-3:E Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GCE_V2 | I2PAK, vertical, pad names 1:G-2:C-3:E Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
ISOPLUS_I4_H | ISOPLUS i4-PAC (TM), horizontal Source: http://www.ixys.com/l414.pdf | |
ISOPLUS_I4_V | ISOPLUS i4-PAC (TM), vertical Source: http://www.ixys.com/l414.pdf | |
TO-220_GCE_H1 | TO-220, horizontal, pad names 1:G-2:C-3:E w/o mounting pad/hole | |
TO-220_GCE_H10 | TO-220, horizontal reverse (upside heat sink surface), pad names 1:G-2:C-3:E hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm | |
TO-220_GCE_H11 | TO-220, horizontal, "pin header" solder terminals, pad names 1:G-2:C-3:E w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor B�rklin: 07F820 | |
TO-220_GCE_H2 | TO-220, horizontal, pad names 1:G-2:C-3:E w/o mounting pad/hole | |
TO-220_GCE_H3 | TO-220, horizontal, pad names 1:G-2:C-3:E mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GCE_H4 | TO-220, horizontal, pad names 1:G-2:C-3:E mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GCE_H5 | TO-220, horizontal, pad names 1:G-2:C-3:E mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GCE_H6 | TO-220, horizontal, pad names 1:G-2:C-3:E mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GCE_H7 | TO-220, horizontal, pad names 1:G-2:C-3:E distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GCE_H8 | TO-220, horizontal, pad names 1:G-2:C-3:E distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GCE_H9 | TO-220, horizontal reverse (upside heat sink surface), pad names 1:G-2:C-3:E hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm | |
TO-220_GCE_V1 | TO-220, vertical, pad names 1:G-2:C-3:E | |
TO-220_GCE_V2 | TO-220, vertical, pad names 1:G-2:C-3:E | |
TO-268_GCE | Small outline transistor, pad names 1:G-2.2:C-3:E, reflow soldering package/pad dimensions according to IPC-SM-782, RLP No. 237 (pad No. 2.1 is not placed in this case between pads No. 1 and 3, but pad numbering according to its present) other notations: TO268, D3PAK, D3-PAK, DDDPAK, DDD-PAK | |
TO-268_GCE_(IXYS) | Small outline transistor, pad names 1:G-2.2:C-3:E, reflow soldering (pad No. 2.1 is not placed in this case between pads No. 1 and 3, but pad numbering according to its present) Source of package/pad dimensions: IXYS other notations: TO268, D3PAK, D3-PAK, DDDPAK, DDD-PAK |