Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
News
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
Top searches:
ARDUINO NANO POTENTIOMETER 7805 ATMEGA LM2596 BATTERY ARDUINO OLED SWITCH ESP8266 MOSFET 7 SEGMENT TERMINAL BLOCK SD CARD RELAY AMS1117 CONNECTOR 1N4007 LCD TRANSFORMER POLOLU MOTOR JST ATMEGA328P 433 MHZ
Ohter interesting searches:
NODEMCU CON TO252 ATMEGA328 SENSOR 7404 RN BUTTON TO252 7404 RESISTOR LM393 DIODE BUTTON IRF VISHAY 18650 18650 MICROCHIP STM32F4 STM32F4 ATMEGA328 ATMEGA328 VISHAY ATMEL
- Home
- World of EAGLE Libraries
- Library Structure
EAGLE Library Structure
File details
File name: | transistor IGFET-N.lbr |
Uploaded by: | kylie |
Download options: | Download original file from DIYmodules.org ( 241.7 KiB )Download file converted to the latest EAGLE format ( 241.7 KiB ) |
Library description
based on the original libraries (created by librarian@cadsoft.de ):
transistor-power.lbr
transistor-small-signal.lbr
transistor-fet.lbr (checked by R. Vogg, 15.03.2002)
transistor.lbr
These libraries are rearanged by kylie because
elimination of package doubles (same layout, but different names)
elimination of symbol doubles (same electrical function, but different names)
elimination of device doubles (same device, but located in two or more libraries)
unification/renaming of symbols, packages
renaming of packages to most commonly used names/codes (TO-xxx, SOTxxx, ...), if possible according to JEDEC
if avialable: adding of package code variants (JEDEC, JEITA/EIAJ, manufacturer's code, ...) in description (SOT23 = EIAJ SC-59 = JEDEC TO-236AB = Rohm SMT3 = IR Micro3)
adding of package variants with pad names according to the transistor type (bipolar: TO-220_BCE ; FET: TO-220_GDS ; ...)
adding of package variants for different mounting cases, especially for power transistors (horizontal: TO-220_yyy_H ; vertical: TO-220_yyy_V )
deleting of obsolete/discontinued devices
Symbols according to IEC617
The author do not warrant that this library is free from error or will meet your specific requirements.
Updates:
12.2018/01.2019: library generation
List of devices
Name & variants | Symbol | Package |
---|---|---|
BS170 |
small signal N-channel MOSFET, enhancement mode
|
|
Variants: |
||
BSS101 |
small signal N-channel MOSFET, enhancement mode 200V; 0,16A; 11Ohm |
|
Variants: |
||
BSS123 |
small signal N-channel MOSFET, enhancement mode
|
|
Variants: |
||
BUZ11 |
power N-channel MOSFET, enhancement mode 50V; 30A; 40mOhm |
|
Variants: |
||
FDS5680 |
medium power N-channel MOSFET, enhancement mode PowerTrench(TM) |
|
Variants: |
||
IGFET-NE-GDS-D |
generic N-channel insulated gate FET, enhancement type, body diode
|
|
Variants: |
||
IGFET-NE-GDSB |
generic N-channel insulated gate FET, enhancement type, bulk as separated pin
|
|
Variants: |
||
IRF330 |
power N-channel MOSFET, enhancement mode 400V; 5,9A; 1,0Ohm (=BUZ63) |
|
Variants: |
||
IRF350 |
power N-channel MOSFET, enhancement mode HEXFET(R); 400V; 0.3 Ohm; 14A |
|
Variants: |
||
IRF3704 |
power N-channel MOSFET, enhancement mode
HEXFET(R) |
|
Variants: |
||
IRF510 |
power N-channel MOSFET, enhancement mode HEXFET(R); 100V; 5,6A; 0,54Ohm |
|
Variants: |
||
IRF512 |
power N-channel MOSFET, enhancement mode
|
|
Variants: |
||
IRF520 |
power N-channel MOSFET, enhancement mode HEXFET(R) |
|
Variants: |
||
IRF530 |
power N-channel MOSFET, enhancement mode HEXFET(R) |
|
Variants: |
||
IRF540 |
power N-channel MOSFET, enhancement mode HEXFET(R); 100V; 28A; 77mOhm |
|
Variants: |
||
IRF620 |
power N-channel MOSFET, enhancement mode HEXFET(R); 200V; 5,2A; 0,8Ohm |
|
Variants: |
||
IRF740 |
power N-channel MOSFET, enhancement mode
|
|
Variants: |
||
IRF840 |
power N-channel MOSFET, enhancement mode HEXFET(R); 500V; 8A; 0,85Ohm |
|
Variants: |
||
IRFI540N |
power N-channel MOSFET, enhancement mode
HEXFET(R) |
|
Variants: |
||
IRFP240 |
power N-channel MOSFET, enhancement mode HEXFET(R) |
|
Variants: |
||
IRFP250 |
power N-channel MOSFET, enhancement mode
33A/27A, 200V/150V, 85/12mOhm |
|
Variants: |
||
IRFP251 |
power N-channel MOSFET, enhancement mode
33A/27A, 200V/150V, 85/12mOhm |
|
Variants: |
||
IRFP252 |
power N-channel MOSFET, enhancement mode
33A/27A, 200V/150V, 85/12mOhm |
|
Variants: |
||
IRFP253 |
power N-channel MOSFET, enhancement mode
33A/27A, 200V/150V, 85/12mOhm |
|
Variants: |
||
IRFPC40 |
power N-channel MOSFET, enhancement mode
|
|
Variants: |
||
IRFV460 |
power N-channel MOSFET, enhancement mode OBSOLETE? HEXFET(R) |
|
Variants: |
||
IRFZ48 |
power N-channel MOSFET, enhancement mode, logic level
HEXFET(R) |
|
Variants: |
||
IRLL014N |
power N-channel MOSFET, enhancement mode HEXFET(R) |
|
Variants: |
||
IRLL2705 |
power N-channel MOSFET, enhancement mode HEXFET(R) |
|
Variants: |
||
IRLML6244 |
small power N-channel MOSFET, enhancement mode, logig level
HEXFET(R) |
|
Variants: |
||
IRLZ44Z |
power N-channel MOSFET, enhancement mode, logic level, automotive
HEXFET(R) |
|
Variants: |
||
IXFH6N* |
power N-channel MOSFET, enhancement mode
HiPerFET (TM), HDMOS Family |
|
Variants: |
||
RD06HVF1 |
power N-channel MOSFET, enhancement mode, RF applications
175MHz, 6W |
|
Variants: |
||
RD15HVF1 |
power N-channel MOSFET, enhancement mode, RF applications
175MHz...520MHz, 15W |
|
Variants: |
||
SPW47N60 |
power N-channel MOSFET, enhancement mode Infinion CoolMOS(R) |
|
Variants: |
||
SST211 |
N-channel MOSFET, enhancement mode
|
|
Variants: |
||
SST213 |
N-channel MOSFET, enhancement mode
|
|
Variants: |
||
SST215 |
N-channel MOSFET, enhancement mode
|
|
Variants: |
||
TN0604N3 |
small signal N-channel MOSFET, enhancement mode 40V; 4A; 0,85Ohm |
|
Variants: |
||
VN0106N3 |
small signal N-channel MOSFET, enhancement mode 60V; 0,5A; 3,0Ohm |
|
Variants: |
||
VN2222LL |
small signal N-channel MOSFET, enhancement mode (VMOS); 60V; 0,5A; 7,5Ohm |
|
Variants: |
List of symbols
Name | View | Description |
---|---|---|
IGFET-ND-GDS | N-channel insulated gate FET, depletion type, pin names Gate-Drain-Source | |
IGFET-ND-GDSB | N-channel insulated gate FET, depletion type, pin names Gate-Drain-Source-Bulk | |
IGFET-NE-GDS | N-channel insulated gate FET, enhancement type, pin names Gate-Drain-Source | |
IGFET-NE-GDS-D | N-channel insulated gate FET, enhancement type, pin names Gate-Drain-Source body diode | |
IGFET-NE-GDSB | N-channel insulated gate FET, enhancement type, pin names Gate-Drain-Source-Bulk |
List of packages
Name | View | Description |
---|---|---|
D2PAK_GDS | Small outline transistor, pad names 1:G-2.2:D-3:S, reflow soldering package/pad dimensions according to IPC-SM-782, RLP No. 236, component identifier TS-005 (pad No. 2.1 is not placed in this case between pads No. 1 and 3, but pad numbering according to its present) EIAJ / JEITA Code: SC-83 other notations: D2-PAK, DDPAK, DD-PAK, SC83, TO263AB, TO-263AB | |
D2PAK_GDS_(IRF) | Small outline transistor, pad names 1:G-2.2:D-3:S, reflow soldering Source of package/pad dimensions: IRF, Vishay (pad No. 2.1 is not placed in this case between pads No. 1 and 3, but pad numbering according to its present) EIAJ / JEITA Code: SC-83 other notations: D2-PAK, DDPAK, DD-PAK, SC83, TO263AB, TO-263AB | |
DPAK_GDS | Small outline transistor, pad names 1:G-2.2:D-3:S, reflow soldering package/pad dimensions according to IPC-SM-782, RLP No. 235A, component identifier TS-003 (pad No. 2.1 is not placed in this case between pads No. 1 and 3, but pad numbering according to its present) other notations: TO252AA, TO-252AA, SOT428, SOT-428, D-PAK | |
DPAK_GDS_(IRF) | Small outline transistor, pad names 1:G-2.2:D-3:S, reflow soldering Source of package/pad dimensions: IRF, Vishay (pad No. 2.1 is not placed in this case between pads No. 1 and 3, but pad numbering according to its present) other notations: TO252AA, TO-252AA, SOT428, SOT-428, D-PAK | |
I2PAK_GDS_(IRF)_H1 | I2PAK, horizontal, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GDS_(IRF)_H2 | I2PAK, horizontal, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GDS_(IRF)_H3 | I2PAK, horizontal, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GDS_(IRF)_H4 | I2PAK, horizontal, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GDS_(IRF)_H5 | I2PAK, horizontal, "pin header" solder terminals, pad names 1:G-2:D-3:S solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor Bürklin: 07F820 Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GDS_V1 | I2PAK, vertical, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
I2PAK_GDS_V2 | I2PAK, vertical, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I2-PAK, TO262, TO-262, SOT226, SOT-226 | |
IPAK_GDS_(IRF)_H1 | IPAK, horizontal, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I-PAK, TO251AA, TO-251AA | |
IPAK_GDS_(IRF)_H2 | IPAK, horizontal, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I-PAK, TO251AA, TO-251AA | |
IPAK_GDS_(IRF)_H3 | IPAK, horizontal, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I-PAK, TO251AA, TO-251AA | |
IPAK_GDS_(IRF)_H4 | IPAK, horizontal, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I-PAK, TO251AA, TO-251AA | |
IPAK_GDS_V1 | IPAK, vertical, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I-PAK, TO251AA, TO-251AA | |
IPAK_GDS_V2 | IPAK, vertical, pad names 1:G-2:D-3:S Source of package/pad dimensions: IRF, Vishay other notations: I-PAK, TO251AA, TO-251AA | |
SO8 | Small Outline IC, 150mil body width, 50mil lead pitch package/pad dimensions according to IPC-SM-782, RLP No. 300A JEDEC: MS-012 AA IPC: SO8 other notations: SO-8, SO08, SO-08, SOIC8, SOIC-8, SOIC08, SOIC-08 | |
SOT143_BSDG | Small outline transistor, pad names 1:B-2:S-3:D-4:G, reflow soldering package/pad dimensions according to IPC-SM-782, RLP No. 225 EIAJ / JEITA Code: other notations: SOT-143, TO253AA, TO-253AA | |
SOT223_GDSD | Small outline transistor, pad names 1:G-2:D-3:S-4:D, reflow soldering, lead pitch 2.3mm package/pad dimensions according to IPC-SM-782, RLP No. 230 EIAJ / JEITA Code: SC-73 other notations: SC73, SOT-223, TO261AA, TO-261AA | |
SOT23_GSD_R | Small outline transistor, pad names 1:G-2:S-3:D, reflow soldering, lead pitch 0.95mm package/pad dimensions according to IPC-SM-782, RLP No. 210 EIAJ / JEITA Code: SC-59 ROHM Code: SMT3 IR Code: Micro3 other notations: SOT-23, SC59, TO236AB, TO-236AB | |
SOT23_GSD_W | Small outline transistor, pad names 1:G-2:S-3:D, wave soldering, lead pitch 0.95mm package/pad dimensions according to IPC-SM-782, RLP No. 210W EIAJ / JEITA Code: SC-59 ROHM Code: SMT3 IR Code: Micro3 other notations: SOT-23, SC59, TO236AB, TO-236AB | |
TO-220_GDS_H1 | TO-220, horizontal, pad names 1:G-2:D-3:S w/o mounting pad/hole | |
TO-220_GDS_H10 | TO-220, horizontal reverse (upside heat sink surface), pad names 1:G-2:D-3:S hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm | |
TO-220_GDS_H11 | TO-220, horizontal, "pin header" solder terminals, pad names 1:G-2:D-3:S w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor Bürklin: 07F820 | |
TO-220_GDS_H2 | TO-220, horizontal, pad names 1:G-2:D-3:S w/o mounting pad/hole | |
TO-220_GDS_H3 | TO-220, horizontal, pad names 1:G-2:D-3:S mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GDS_H4 | TO-220, horizontal, pad names 1:G-2:D-3:S mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GDS_H5 | TO-220, horizontal, pad names 1:G-2:D-3:S mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GDS_H6 | TO-220, horizontal, pad names 1:G-2:D-3:S mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GDS_H7 | TO-220, horizontal, pad names 1:G-2:D-3:S distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GDS_H8 | TO-220, horizontal, pad names 1:G-2:D-3:S distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-220_GDS_H9 | TO-220, horizontal reverse (upside heat sink surface), pad names 1:G-2:D-3:S hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm | |
TO-220_GDS_V1 | TO-220, vertical, pad names 1:G-2:D-3:S | |
TO-220_GDS_V2 | TO-220, vertical, pad names 1:G-2:D-3:S | |
TO-247_GDS_H1 | TO-247, horizontal, pad names 1:G-2:D-3:S distance case hole - pads: 22.86mm / 900 mil w/o mounting pad/hole | |
TO-247_GDS_H2 | TO-247, horizontal, pad names 1:G-2:D-3:S distance mounting hole - pads: 22.86mm / 900 mil mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-247_GDS_H3 | TO-247, horizontal, pad names 1:G-2:D-3:S distance mounting hole/pad - pads: 22.86mm / 900 mil mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) | |
TO-247_GDS_H4 | TO-247, horizontal reverse (upside heat sink surface), pad names 1:G-2:D-3:S distance case hole - pads: 22.86mm / 900 mil hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm | |
TO-247_GDS_H5 | TO-247, horizontal, "pin header" solder terminals, pad names 1:G-2:D-3:S distance case hole - pads: 22.86mm / 900 mil w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor Bürklin: 07F820 | |
TO-247_GDS_V | TO-247, vertical, pad names 1:G-2:D-3:S | |
TO-258_DSG_H | TO-258AA, horizontal, pad names 1:D-2:S-3:G | |
TO-258_DSG_V | TO-258AA, vertical, | |
TO-3_GSD | TO-3, pad names 1:G-2:S-3:D original JEDEC outline TO-3, revised JEDEC outline TO-204AA mounting pads: for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089) | |
TO-92_DGS | JEDEC TO-92, pad names 1:D-2:G-3:S SOT54 JEITA: SC-43A | |
TO-92_DGS_1 | similiar to JEDEC TO-92, pad names 1:D-2:G-3:S SOT54 JEITA: SC-43A | |
TO-92_DGS_2 | similiar to JEDEC TO-92, pad names 1:D-2:G-3:S SOT54 JEITA: SC-43A | |
TO-92_DGS_3 | similiar to JEDEC TO-92, pad names 1:D-2:G-3:S SOT54 JEITA: SC-43A | |
TO-92_DGS_4 | similiar to JEDEC TO-92, pad names 1:D-2:G-3:S SOT54 JEITA: SC-43A | |
TO-92_SGD | JEDEC TO-92, pad names 1:S-2:G-3:D SOT54 JEITA: SC-43A | |
TO-92_SGD_1 | similiar to JEDEC TO-92, pad names 1:S-2:G-3:D SOT54 JEITA: SC-43A | |
TO-92_SGD_2 | similiar to JEDEC TO-92, pad names 1:S-2:G-3:D SOT54 JEITA: SC-43A | |
TO-92_SGD_3 | similiar to JEDEC TO-92, pad names 1:S-2:G-3:D SOT54 JEITA: SC-43A | |
TO-92_SGD_4 | similiar to JEDEC TO-92, pad names 1:S-2:G-3:D SOT54 JEITA: SC-43A |