Facebook Official Page

www.facebook.com/DIYmodules

Share EAGLE library

Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?

More...

News

2017-07-02

DIY Modules Eagle Library version 1.8.0 has been released.

2017-05-20

DIY Modules Eagle Library version 1.7.0 has been released.

2017-05-03

DIY Modules Eagle Library version 1.6.0 has been released.

More news...

EAGLE Library Structure

File details

File name:thyristor triac diac.lbr
Uploaded by:kylie
Download options:Download original file
from DIYmodules.org
( 332.2 KiB )
Download file converted
to the latest EAGLE format
( 332.2 KiB )

Library description

Thyristors, Triacs, Trigger Diodes



based on the original library triac.lbr (created by librarian@cadsoft.de )


These library is rearanged by kylie because elimination of package doubles (same layout, but different names) unification/renaming of symbols, packages renaming of packages to most commonly used names/codes (TO-xxx, SOTxxx, ...), if possible according to JEDEC if avialable: adding of package code variants (JEDEC, JEITA/EIAJ, manufacturer's code, ...) in description (SOT23 = EIAJ SC-59 = JEDEC TO-236AB = Rohm SMT3 = IR Micro3) adding of package variants with pad names according to the thyristor/triac type (thyristor: TO-220_CAG ; triac: TO-220_A1A2G ; ...) adding of package variants for different mounting cases, especially for power packages (horizontal: TO-220_yyy_H ; vertical: TO-220_yyy_V ) The author do not warrant that this library is free from error or will meet your specific requirements.


Updates:

01.03.2020: some diacs moved from library diodes.lbr TO-220 diac packages added

20.01.2019: library generation

List of devices

Name & variantsSymbolPackage
BR210 Trigger diode (diac)

Variants:

BR210_H2

BR210_H4

BR210_H6

BR210_H7

BR210_H8

BR210_H10

BR210_H11

BR210_V

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BR220 dual Trigger diode (diac)

Variants:

BR220_H1

BR220_H2

BR220_H3

BR220_H4

BR220_H5

BR220_H6

BR220_H7

BR220_H8

BR220_H9

BR220_H10

BR220_H11

BR220_V1

BR220_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BRX44 Thyristor

Variants:

BRX44

BRX44_1

BRX44_2

BRX44_3

BRX44_4

Preview PreviewPreviewPreviewPreviewPreview
BRX47 Thyristor

Variants:

BRX47

BRX47_1

BRX47_2

BRX47_3

BRX47_4

Preview PreviewPreviewPreviewPreviewPreview
BRX49 Thyristor

Variants:

BRX49

BRX49_1

BRX49_2

BRX49_3

BRX49_4

Preview PreviewPreviewPreviewPreviewPreview
BT134 Triac

Variants:

BT134_H1

BT134_H2

BT134_V1

BT134_V2

Preview PreviewPreviewPreviewPreview
BT136 Triac BT136 series, E sensitive gate

Source: NXP

Variants:

BT136_H1

BT136_H2

BT136_H3

BT136_H4

BT136_H5

BT136_H6

BT136_H7

BT136_H8

BT136_H9

BT136_H10

BT136_H11

BT136_V1

BT136_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BT138 Triac

Source: http://www.semiconductors.philips.com
BT138_SERIES_2.pdf

Variants:

BT138_H1

BT138_H2

BT138_H3

BT138_H4

BT138_H5

BT138_H6

BT138_H7

BT138_H8

BT138_H9

BT138_H10

BT138_H11

BT138_V1

BT138_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BT148 Thyristor

Variants:

BT148_H1

BT148_H2

BT148_V1

BT148_V2

Preview PreviewPreviewPreviewPreview
BT149 Thyristor

Variants:

BT149

BT149_1

BT149_2

BT149_3

BT149_4

Preview PreviewPreviewPreviewPreviewPreview
BT151 Thyristor

Variants:

BT151_H1

BT151_H2

BT151_H3

BT151_H4

BT151_H5

BT151_H6

BT151_H7

BT151_H8

BT151_H9

BT151_H10

BT151_H11

BT151_V1

BT151_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BT169 Thyristor

Variants:

BT169

BT169_1

BT169_2

BT169_3

BT169_4

Preview PreviewPreviewPreviewPreviewPreview
BTA16 Triac

16A, isolated heat sink

Variants:

BTA16_H1

BTA16_H2

BTA16_H3

BTA16_H4

BTA16_H5

BTA16_H6

BTA16_H7

BTA16_H8

BTA16_H9

BTA16_H10

BTA16_H11

BTA16_V1

BTA16_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BTA26 Triac

25A, isolated heat sink

Variants:

BTA26_H1

BTA26_H2

BTA26_H3

BTA26_H4

BTA26_H5

BTA26_V

Preview PreviewPreviewPreviewPreviewPreviewPreview
BTR59 Thyristor

Variants:

BTR59_H1

BTR59_H2

BTR59_H3

BTR59_H4

BTR59_H5

BTR59_H6

BTR59_H7

BTR59_V

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BTV58 Thyristor

Variants:

BTV58_H1

BTV58_H2

BTV58_H3

BTV58_H4

BTV58_H5

BTV58_H6

BTV58_H7

BTV58_H8

BTV58_H9

BTV58_H10

BTV58_H11

BTV58_V1

BTV58_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BTW58 Thyristor

Variants:

BTW58_H1

BTW58_H2

BTW58_H3

BTW58_H4

BTW58_H5

BTW58_H6

BTW58_H7

BTW58_H8

BTW58_H9

BTW58_H10

BTW58_H11

BTW58_V1

BTW58_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
BTW68 Thyristor

Variants:

BTW68_H1

BTW68_H2

BTW68_H3

BTW68_H4

BTW68_H5

BTW68_V

Preview PreviewPreviewPreviewPreviewPreviewPreview
DIAC- generic Trigger diode (diac)

Variants:

DIAC-_DO35-V

DIAC-_DO35-H1

DIAC-_DO35-H2

DIAC-_TO-220_H2

DIAC-_TO-220_H4

DIAC-_TO-220_H6

DIAC-_TO-220_H7

DIAC-_TO-220_H8

DIAC-_TO-220_H10

DIAC-_TO-220_H11

DIAC-_TO-220_V

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
ER900 Trigger diode (diac)

Variants:

ER900_1

ER900_2

ER900_3

Preview PreviewPreviewPreview
GT32 Trigger diode (diac)

Variants:

GT32_1

GT32_2

GT32_3

Preview PreviewPreviewPreview
MCR106 Thyristor

Variants:

MCR106_H1

MCR106_H2

MCR106_H3

MCR106_H4

MCR106_H5

MCR106_H6

MCR106_H7

MCR106_H8

MCR106_V1

MCR106_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
TIC106S Thyristor

Variants:

TIC106S_H1

TIC106S_H2

TIC106S_H3

TIC106S_H4

TIC106S_H5

TIC106S_H6

TIC106S_H7

TIC106S_H8

TIC106S_H9

TIC106S_H10

TIC106S_H11

TIC106S_V1

TIC106S_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
TIC116 Thyristor

Variants:

TIC116_H1

TIC116_H2

TIC116_H3

TIC116_H4

TIC116_H5

TIC116_H6

TIC116_H7

TIC116_H8

TIC116_H9

TIC116_H10

TIC116_H11

TIC116_V1

TIC116_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
TIC126 Thyristor

Variants:

TIC126_H1

TIC126_H2

TIC126_H3

TIC126_H4

TIC126_H5

TIC126_H6

TIC126_H7

TIC126_H8

TIC126_H9

TIC126_H10

TIC126_H11

TIC126_V1

TIC126_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
TIC206* Triac

Source: http://www.bourns.com/pdfs/tic206.pdf

Variants:

TIC206D_H1

TIC206M_H1

TIC206S_H1

TIC206D_H2

TIC206M_H2

TIC206S_H2

TIC206D_H3

TIC206M_H3

TIC206S_H3

TIC206D_H4

TIC206M_H4

TIC206S_H4

TIC206D_H5

TIC206M_H5

TIC206S_H5

TIC206D_H6

TIC206M_H6

TIC206S_H6

TIC206D_H7

TIC206M_H7

TIC206S_H7

TIC206D_H8

TIC206M_H8

TIC206S_H8

TIC206D_H9

TIC206M_H9

TIC206S_H9

TIC206D_H10

TIC206M_H10

TIC206S_H10

TIC206D_H11

TIC206M_H11

TIC206S_H11

TIC206D_V1

TIC206M_V1

TIC206S_V1

TIC206D_V2

TIC206M_V2

TIC206S_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
TIC225S Triac

Variants:

TIC225S_H1

TIC225S_H2

TIC225S_H3

TIC225S_H4

TIC225S_H5

TIC225S_H6

TIC225S_H7

TIC225S_H8

TIC225S_H9

TIC225S_H10

TIC225S_H11

TIC225S_V1

TIC225S_V2

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
TIC253 Triac

Variants:

TIC253_H1

TIC253_H2

TIC253_H3

TIC253_H4

TIC253_H5

TIC253_H6

TIC253_H7

TIC253_V

Preview PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview
TICP106 Thyristor

Variants:

TICP106

TICP106_1

TICP106_2

TICP106_3

TICP106_4

Preview PreviewPreviewPreviewPreviewPreview
TICP206 Triac

Variants:

TICP206

TICP206_1

TICP206_2

TICP206_3

TICP206_4

Preview PreviewPreviewPreviewPreviewPreview

List of symbols

NameViewDescription
DIAC Preview
DIAC2 Preview
GTO1 Preview
GTO2 Preview
THYR-R Preview
THYR1 Preview
THYR2 Preview
THYRD Preview
THYRDRL Preview
THYRDZ Preview
THYRTET Preview
TRIAC Preview

List of packages

NameViewDescription
DO-35_100MIL-V Preview Diac (diode) package DO-35, vertical, grid 100mil, pad names 1-2 body diameter 2.0 mm other notations: DO35, DO-204AH, DO204AH, SOD27, SOD-27
DO-35_300MIL Preview Diac (diode) package DO-35, horizontal, grid 300mil, pad names 1-2 THT type, body diameter 2 mm, horizontal, grid 300mil body diameter 2.0 mm other notations: DO35, DO-204AH, DO204AH, SOD27, SOD-27
DO-35_400MIL Preview Diac (diode) package DO-35, horizontal, grid 400mil, pad names 1-2 THT type, body diameter 2 mm, horizontal, grid 400mil body diameter 2.0 mm other notations: DO35, DO-204AH, DO204AH, SOD27, SOD-27
SOT82_A1A2G_(NXP)_H1 Preview SOT82 (NXP), horizontal, pad names 1:A1-2:A2-3:G similiar to JEDEC outline TO-126 (revised JEDEC outline TO-225AA): "hole-less" variant of TO-126
SOT82_A1A2G_(NXP)_H2 Preview SOT82 (NXP), horizontal, pad names 1:A1-2:A2-3:G similiar to JEDEC outline TO-126 (revised JEDEC outline TO-225AA): "hole-less" variant of TO-126
SOT82_A1A2G_(NXP)_V1 Preview SOT82 (NXP), vertical, pad names 1:A1-2:A2-3:G similiar to JEDEC outline TO-126 (revised JEDEC outline TO-225AA): "hole-less" variant of TO-126
SOT82_A1A2G_(NXP)_V2 Preview SOT82 (NXP), vertical, pad names 1:A1-2:A2-3:G similiar to JEDEC outline TO-126 (revised JEDEC outline TO-225AA): "hole-less" variant of TO-126
SOT82_CAG_(NXP)_H1 Preview SOT82 (NXP), horizontal, pad names 1:C-2:A-3:G similiar to JEDEC outline TO-126 (revised JEDEC outline TO-225AA): "hole-less" variant of TO-126
SOT82_CAG_(NXP)_H2 Preview SOT82 (NXP), horizontal, pad names 1:C-2:A-3:G similiar to JEDEC outline TO-126 (revised JEDEC outline TO-225AA): "hole-less" variant of TO-126
SOT82_CAG_(NXP)_V1 Preview SOT82 (NXP), vertical, pad names 1:C-2:A-3:G similiar to JEDEC outline TO-126 (revised JEDEC outline TO-225AA): "hole-less" variant of TO-126
SOT82_CAG_(NXP)_V2 Preview SOT82 (NXP), vertical, pad names 1:C-2:A-3:G similiar to JEDEC outline TO-126 (revised JEDEC outline TO-225AA): "hole-less" variant of TO-126
TO-126_CAG_H1 Preview TO-126, horizontal, pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA w/o mounting pad/hole
TO-126_CAG_H2 Preview TO-126, horizontal, pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA w/o mounting pad/hole
TO-126_CAG_H3 Preview TO-126, horizontal, pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-126_CAG_H4 Preview TO-126, horizontal, pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-126_CAG_H5 Preview TO-126, horizontal, pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-126_CAG_H6 Preview TO-126, horizontal, pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-126_CAG_H7 Preview TO-126, horizontal reverse (upside heat sink surface), pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-126_CAG_H8 Preview TO-126, horizontal reverse (upside heat sink surface), pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-126_CAG_V1 Preview TO-126, vertical, pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA
TO-126_CAG_V2 Preview TO-126, vertical, pad names 1:C-2:A-3:G original JEDEC outline TO-126, revised JEDEC outline TO-225AA
TO-218_A1A2G_H1 Preview TO-218, horizontal, pad names 1:A1-2:A2-3:G distance case hole - pads: 22.86mm / 900 mil w/o mounting pad/hole similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_A1A2G_H2 Preview TO-218, horizontal, pad names 1:A1-2:A2-3:G distance mounting hole - pads: 22.86mm / 900 mil mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_A1A2G_H3 Preview TO-218, horizontal, pad names 1:A1-2:A2-3:G distance mounting hole - pads: 22.86mm / 900 mil mounting hole (w/o pad): for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089) similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_A1A2G_H4 Preview TO-218, horizontal, pad names 1:A1-2:A2-3:G distance mounting hole/pad - pads: 22.86mm / 900 mil mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_A1A2G_H5 Preview TO-218, horizontal, pad names 1:A1-2:A2-3:G distance mounting hole/pad - pads: 22.86mm / 900 mil mounting pad: for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089) similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_A1A2G_H6 Preview TO-218, horizontal reverse (upside heat sink surface), pad names 1:A1-2:A2-3:G distance case hole - pads: 22.86mm / 900 mil hole for screw driver to mount a M3/M4 screw with washer ("through PCB" mount) drill diameter 10.5 mm (washer DIN 125 / ISO 7089) restrict diameter 11.3 mm similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_A1A2G_H7 Preview TO-218, horizontal, "pin header" solder terminals, pad names 1:A1-2:A2-3:G distance case hole - pads: 22.86mm / 900 mil w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor B?rklin: 07F820 similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_A1A2G_V Preview TO-218, vertical, pad names 1:A1-2:A2-3:G similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_CAG_H1 Preview TO-218, horizontal, pad names 1:C-2:A-3:G distance case hole - pads: 22.86mm / 900 mil w/o mounting pad/hole similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_CAG_H2 Preview TO-218, horizontal, pad names 1:C-2:A-3:G distance mounting hole - pads: 22.86mm / 900 mil mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_CAG_H3 Preview TO-218, horizontal, pad names 1:C-2:A-3:G distance mounting hole - pads: 22.86mm / 900 mil mounting hole (w/o pad): for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089) similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_CAG_H4 Preview TO-218, horizontal, pad names 1:C-2:A-3:G distance mounting hole/pad - pads: 22.86mm / 900 mil mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089) similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_CAG_H5 Preview TO-218, horizontal, pad names 1:C-2:A-3:G distance mounting hole/pad - pads: 22.86mm / 900 mil mounting pad: for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089) similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_CAG_H6 Preview TO-218, horizontal reverse (upside heat sink surface), pad names 1:C-2:A-3:G distance case hole - pads: 22.86mm / 900 mil hole for screw driver to mount a M3/M4 screw with washer ("through PCB" mount) drill diameter 10.5 mm (washer DIN 125 / ISO 7089) restrict diameter 11.3 mm similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_CAG_H7 Preview TO-218, horizontal, "pin header" solder terminals, pad names 1:C-2:A-3:G distance case hole - pads: 22.86mm / 900 mil w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor B?rklin: 07F820 similiar to TOP-3 other notations: SOT93, SOT-93
TO-218_CAG_V Preview TO-218, vertical, pad names 1:C-2:A-3:G similiar to TOP-3 other notations: SOT93, SOT-93
TO-220_A1A2G_H1 Preview TO-220, horizontal, pad names 1:A1-2:A2-3:G w/o mounting pad/hole
TO-220_A1A2G_H10 Preview TO-220, horizontal reverse (upside heat sink surface), pad names 1:A1-2:A2-3:G hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-220_A1A2G_H11 Preview TO-220, horizontal, "pin header" solder terminals, pad names 1:A1-2:A2-3:G w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor B?rklin: 07F820
TO-220_A1A2G_H2 Preview TO-220, horizontal, pad names 1:A1-2:A2-3:G w/o mounting pad/hole
TO-220_A1A2G_H3 Preview TO-220, horizontal, pad names 1:A1-2:A2-3:G mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_A1A2G_H4 Preview TO-220, horizontal, pad names 1:A1-2:A2-3:G mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_A1A2G_H5 Preview TO-220, horizontal, pad names 1:A1-2:A2-3:G mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_A1A2G_H6 Preview TO-220, horizontal, pad names 1:A1-2:A2-3:G mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_A1A2G_H7 Preview TO-220, horizontal, pad names 1:A1-2:A2-3:G distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_A1A2G_H8 Preview TO-220, horizontal, pad names 1:A1-2:A2-3:G distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_A1A2G_H9 Preview TO-220, horizontal reverse (upside heat sink surface), pad names 1:A1-2:A2-3:G hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-220_A1A2G_V1 Preview TO-220, vertical, pad names 1:A1-2:A2-3:G
TO-220_A1A2G_V2 Preview TO-220, vertical, pad names 1:A1-2:A2-3:G
TO-220_CAG_H1 Preview TO-220, horizontal, pad names 1:C-2:A-3:G w/o mounting pad/hole
TO-220_CAG_H10 Preview TO-220, horizontal reverse (upside heat sink surface), pad names 1:C-2:A-3:G hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-220_CAG_H11 Preview TO-220, horizontal, "pin header" solder terminals, pad names 1:C-2:A-3:G w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor B?rklin: 07F820
TO-220_CAG_H2 Preview TO-220, horizontal, pad names 1:C-2:A-3:G w/o mounting pad/hole
TO-220_CAG_H3 Preview TO-220, horizontal, pad names 1:C-2:A-3:G mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_CAG_H4 Preview TO-220, horizontal, pad names 1:C-2:A-3:G mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_CAG_H5 Preview TO-220, horizontal, pad names 1:C-2:A-3:G mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_CAG_H6 Preview TO-220, horizontal, pad names 1:C-2:A-3:G mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_CAG_H7 Preview TO-220, horizontal, pad names 1:C-2:A-3:G distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_CAG_H8 Preview TO-220, horizontal, pad names 1:C-2:A-3:G distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_CAG_H9 Preview TO-220, horizontal reverse (upside heat sink surface), pad names 1:C-2:A-3:G hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-220_CAG_V1 Preview TO-220, vertical, pad names 1:C-2:A-3:G
TO-220_CAG_V2 Preview TO-220, vertical, pad names 1:C-2:A-3:G
TO-220_T1T2T3_H1 Preview TO-220, horizontal, pad names T1-T2-T3 w/o mounting pad/hole
TO-220_T1T2T3_H10 Preview TO-220, horizontal reverse (upside heat sink surface), pad names T1-T2-T3 hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-220_T1T2T3_H11 Preview TO-220, horizontal, "pin header" solder terminals, pad names T1-T2-T3 w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor Bürklin: 07F820
TO-220_T1T2T3_H2 Preview TO-220, horizontal, pad names T1-T2-T3 w/o mounting pad/hole
TO-220_T1T2T3_H3 Preview TO-220, horizontal, pad names T1-T2-T3 mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2T3_H4 Preview TO-220, horizontal, pad names T1-T2-T3 mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2T3_H5 Preview TO-220, horizontal, pad names T1-T2-T3 mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2T3_H6 Preview TO-220, horizontal, pad names T1-T2-T3 mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2T3_H7 Preview TO-220, horizontal, pad names T1-T2-T3 distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2T3_H8 Preview TO-220, horizontal, pad names T1-T2-T3 distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2T3_H9 Preview TO-220, horizontal reverse (upside heat sink surface), pad names T1-T2-T3 hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-220_T1T2T3_V1 Preview TO-220, vertical, pad names T1-T2-T3
TO-220_T1T2T3_V2 Preview TO-220, vertical, pad names T1-T2-T3
TO-220_T1T2_H10 Preview TO-220, horizontal reverse (upside heat sink surface), pad names T1-T2 hole for screw driver to mount a M3 screw with washer ("through PCB" mount) drill diameter 8.0 mm (for washer DIN 125 / ISO 7089) restrict diameter 8.7 mm
TO-220_T1T2_H11 Preview TO-220, horizontal, "pin header" solder terminals, pad names T1-T2 w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor Bürklin: 07F820
TO-220_T1T2_H2 Preview TO-220, horizontal, pad names T1-T2 w/o mounting pad/hole
TO-220_T1T2_H4 Preview TO-220, horizontal, pad names T1-T2 mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2_H6 Preview TO-220, horizontal, pad names T1-T2 mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2_H7 Preview TO-220, horizontal, pad names T1-T2 distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting hole (w/o pad): for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2_H8 Preview TO-220, horizontal, pad names T1-T2 distance mounting hole - pads according to fischer elektronik heat sinks (14.75mm / 580mil) mounting pad: for M3 screw with washer drill diameter 3.2 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 8.7 mm (for washer DIN 125 / ISO 7089)
TO-220_T1T2_V Preview TO-220, vertical, pad names T1-T2
TO-92_AGC Preview JEDEC TO-92, pad names 1:A-2:G-3:C SOT54 JEITA: SC-43A
TO-92_AGC_1 Preview similiar to JEDEC TO-92, pad names 1:A-2:G-3:C SOT54 JEITA: SC-43A
TO-92_AGC_2 Preview similiar to JEDEC TO-92, pad names 1:A-2:G-3:C SOT54 JEITA: SC-43A
TO-92_AGC_3 Preview similiar to JEDEC TO-92, pad names 1:A-2:G-3:C SOT54 JEITA: SC-43A
TO-92_AGC_4 Preview similiar to JEDEC TO-92, pad names 1:A-2:G-3:C SOT54 JEITA: SC-43A
TO-92_CGA Preview JEDEC TO-92, pad names 1:C-2:G-3:A SOT54 JEITA: SC-43A
TO-92_CGA_1 Preview similiar to JEDEC TO-92, pad names 1:C-2:G-3:A SOT54 JEITA: SC-43A
TO-92_CGA_2 Preview similiar to JEDEC TO-92, pad names 1:C-2:G-3:A SOT54 JEITA: SC-43A
TO-92_CGA_3 Preview similiar to JEDEC TO-92, pad names 1:C-2:G-3:A SOT54 JEITA: SC-43A
TO-92_CGA_4 Preview similiar to JEDEC TO-92, pad names 1:C-2:G-3:A SOT54 JEITA: SC-43A
TO-92_GA2A1 Preview JEDEC TO-92, pad names 1:G-2:A2-3:A1 SOT54 JEITA: SC-43A
TO-92_GA2A1_1 Preview similiar to JEDEC TO-92, pad names 1:G-2:A2-3:A1 SOT54 JEITA: SC-43A
TO-92_GA2A1_2 Preview similiar to JEDEC TO-92, pad names 1:G-2:A2-3:A1 SOT54 JEITA: SC-43A
TO-92_GA2A1_3 Preview similiar to JEDEC TO-92, pad names 1:G-2:A2-3:A1 SOT54 JEITA: SC-43A
TO-92_GA2A1_4 Preview similiar to JEDEC TO-92, pad names 1:G-2:A2-3:A1 SOT54 JEITA: SC-43A
TO-92_GAC Preview JEDEC TO-92, pad names 1:G-2:A-3:C SOT54 JEITA: SC-43A
TO-92_GAC_1 Preview similiar to JEDEC TO-92, pad names 1:G-2:A-3:C SOT54 JEITA: SC-43A
TO-92_GAC_2 Preview similiar to JEDEC TO-92, pad names 1:G-2:A-3:C SOT54 JEITA: SC-43A
TO-92_GAC_3 Preview similiar to JEDEC TO-92, pad names 1:G-2:A-3:C SOT54 JEITA: SC-43A
TO-92_GAC_4 Preview similiar to JEDEC TO-92, pad names 1:G-2:A-3:C SOT54 JEITA: SC-43A
TOP-3_A1A2G_H1 Preview TOP-3, horizontal, pad names 1:A1-2:A2-3:G distance case hole - pads: 20.32mm / 800 mil similiar to TO-218 w/o mounting pad/hole
TOP-3_A1A2G_H2 Preview TOP-3, horizontal, pad names 1:A1-2:A2-3:G distance mounting hole - pads: 20.32mm / 800 mil similiar to TO-218 mounting hole (w/o pad): for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089)
TOP-3_A1A2G_H3 Preview TOP-3, horizontal, pad names 1:A1-2:A2-3:G distance mounting hole/pad - pads: 20.32mm / 800 mil similiar to TO-218 mounting pad: for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089)
TOP-3_A1A2G_H4 Preview TOP-3, horizontal reverse (upside heat sink surface), pad names 1:A1-2:A2-3:G distance case hole - pads: 20.32mm / 800 mil similiar to TO-218 hole for screw driver to mount a M4 screw with washer ("through PCB" mount) drill diameter 10.5 mm (washer DIN 125 / ISO 7089) restrict diameter 11.3 mm
TOP-3_A1A2G_H5 Preview TOP-3, horizontal, "pin header" solder terminals, pad names 1:A1-2:A2-3:G distance case hole - pads: 20.32mm / 800 mil similiar to TO-218 w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor B?rklin: 07F820
TOP-3_A1A2G_V Preview TOP-3, vertical, pad names 1:A1-2:A2-3:G similiar to TO-218
TOP-3_CAG_H1 Preview TOP-3, horizontal, pad names 1:C-2:A-3:G distance case hole - pads: 20.32mm / 800 mil similiar to TO-218 w/o mounting pad/hole
TOP-3_CAG_H2 Preview TOP-3, horizontal, pad names 1:C-2:A-3:G distance mounting hole - pads: 20.32mm / 800 mil similiar to TO-218 mounting hole (w/o pad): for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089)
TOP-3_CAG_H3 Preview TOP-3, horizontal, pad names 1:C-2:A-3:G distance mounting hole/pad - pads: 20.32mm / 800 mil similiar to TO-218 mounting pad: for M4 screw with washer drill diameter 4.3 mm (clearance hole DIN EN 20273 / ISO 273: fine) restrict diameter 11.3 mm (washer DIN 125 / ISO 7089)
TOP-3_CAG_H4 Preview TOP-3, horizontal reverse (upside heat sink surface), pad names 1:C-2:A-3:G distance case hole - pads: 20.32mm / 800 mil similiar to TO-218 hole for screw driver to mount a M4 screw with washer ("through PCB" mount) drill diameter 10.5 mm (washer DIN 125 / ISO 7089) restrict diameter 11.3 mm
TOP-3_CAG_H5 Preview TOP-3, horizontal, "pin header" solder terminals, pad names 1:C-2:A-3:G distance case hole - pads: 20.32mm / 800 mil similiar to TO-218 w/o mounting pad/hole solder terminals: press-fit mount drill 1.3mm Vogt 1365 series distributor B?rklin: 07F820
TOP-3_CAG_V Preview TOP-3, vertical, pad names 1:C-2:A-3:G similiar to TO-218
Copyright © 2015-2017 DIYmodules.org|Contact webmaster
Our website uses icons made by www.icondrawer.com