Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
News
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
Top searches:
ARDUINO NANO POTENTIOMETER 7805 ATMEGA LM2596 BATTERY ARDUINO OLED SWITCH ESP8266 MOSFET 7 SEGMENT TERMINAL BLOCK SD CARD RELAY AMS1117 CONNECTOR LCD 1N4007 TRANSFORMER POLOLU MOTOR JST ATMEGA328P 433 MHZ
Ohter interesting searches:
ALPS FUSE SIM900 400 CAPACITOR PIN HEADER DIODE RN USB ESP 315 MHZ PCB ANTENNA TDA2005 BLUETOOTH MODULE USB 3.0 RCA IR2110 420 RJ45 CAPACITOR TL431 NODEMCU HIROSE PANASONIC 315 MHZ PCB ANTENNA HIROSE USB CON
- Home
- World of EAGLE Libraries
- Library Structure
EAGLE Library Structure
File details
| File name: | prolific.lbr |
| Uploaded by: | dimitrialbino |
| Download options: | Download original file from DIYmodules.org ( 21.8 KiB )Download file converted to the latest EAGLE format ( 21.8 KiB ) |
Library description
This file has no description inside.
Below description of the library from CadSoft webpage:
List of devices
| Name & variants | Symbol | Package |
|---|---|---|
| PL-2303HXD | PL-2303HX Edition (Chip Rev D) USB to Serial Bridge Controller (NEW VERSION 2013) http://www.prolific.com.tw/UserFiles/files/ds_pl2303HXD_v1_4_4.pdf PL-2303HX (Chip Rev D) or PL-2303HXD provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. PL-2303HXD highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. By taking advantage of USB bulk transfer mode, large data buffers, and automatic flow control, PL-2303HXD is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports. When real RS232 signaling is not required, baud rate higher than 115200 bps could be used for even higher performance. The flexible baud rate generator of PL-2303HXD could be programmed to generate any rate between 75 bps to 12M bps. | |
Variants: |
 |
 |
| PL-2303XA | PL-2303X Edition (Chip Rev A) USB to Serial Bridge Controller (OLD VERSION YEAR 2006) http://www.prolificusa.com/pdf/PL-2303XA.pdf PL-2303X provides a convenient solution for connecting an RS232-like full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. PL-2303X highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. By taking advantage of USB bulk transfer mode, large data buffers, and automatic flow control, PL-2303X is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports. When real RS232 signaling is not required, baud rate higher than 115200 bps could be used for even higher performance. The flexible baud rate generator of PL-2303X could be programmed to generate any rate between 75 bps and 6Mbps. | |
Variants: |
 |
|
List of symbols
| Name | View | Description |
|---|---|---|
| PL-2303HXD | |
|
| PL-2303XA | |
List of packages
| Name | View | Description |
|---|---|---|
| SSOP28 | |