Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
News
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
Top searches:
ARDUINO NANO POTENTIOMETER 7805 ATMEGA LM2596 BATTERY ARDUINO OLED SWITCH ESP8266 MOSFET 7 SEGMENT TERMINAL BLOCK SD CARD RELAY AMS1117 CONNECTOR 1N4007 LCD TRANSFORMER POLOLU MOTOR JST 433 MHZ IR2110
Ohter interesting searches:
PANASONIC ESP32 BLUETOOTH MODULE 400 CAPACITOR DISPLAY SENSOR ATMEL USB TYPE C ATMEGA328P MURATA FUSE HIROSE USB DIODE 1N58 HEADER TO252 PANASONIC 1N58 INDUCTOR ESP USB RESISTOR USB 3.0 ACS712 INDUCTOR
- Home
- World of EAGLE Libraries
- Library Structure
EAGLE Library Structure
File details
File name: | arduino_jw.lbr |
Uploaded by: | SalbaheJim |
Download options: | Download original file from DIYmodules.org ( 45.5 KiB )Download file converted to the latest EAGLE format ( 45.5 KiB ) |
Library description
This library contains custom connectors for the Arduino Uno R3 for use in making custom shields. Please feel free to use and modify as you like.
No guarantees! This is my first attempt to make custom parts in Eagle and they're simple enough, but I haven't actually fabricated a board using them so use at your own risk.
~Jim Watts
18-March-2015
List of devices
Name & variants | Symbol | Package |
---|---|---|
ARDUINO_CONN-ANALOG | Arduino Analog I/O Header
This is the analog I/O header on the Arduino Uno R3. This connector is labeled with the following pin assignments: Analog 0 Analog 1 Analog 2 Analog 3 Analog 4 Analog 5 NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. |
|
Variants: |
||
ARDUINO_CONN-ICSP | Arduino ICSP I/O Header
This is the ICSP I/O header on the Arduino Uno R3. This connector is labeled with the following pin assignments: MISO +5V SCK MOSI RESET GND NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. |
|
Variants: |
||
ARDUINO_CONN-IO_H | Arduino Digital I/O [High Byte] Header
This is the Digital I/O [high byte] header on the Arduino Uno R3. This connector is labeled with the following pin assignments: Digital 8 Digital 9 [PWM] Digital 10 [PWM] Digital 11 [PWM] Digital 12 Digital 13 GND AREF SDA SCL NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. |
|
Variants: |
||
ARDUINO_CONN-IO_L | Arduino Digital I/O [Low Byte] Header
This is the Digital I/O [low byte] header on the Arduino Uno R3. This connector is labeled with the following pin assignments: Digital 0, Serial Rx Digital 1, Serial Tx Digital 2 Digital 4 Digital 5 [PWM] Digital 6 [PWM] Digital 7 NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. |
|
Variants: |
||
ARDUINO_CONN-POWER | Arduino Power Header
This is the power header on the Arduino Uno R3. This connector is labeled with the following pin assignments: n/c IO Ref RESET +3.3V +5V GND GND VIN NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. |
|
Variants: |
List of symbols
Name | View | Description |
---|---|---|
ANALOG | Arduino Analog I/O Header Symbol | |
I/O_H | Arduino Digital I/O [High Byte] Header Symbol | |
I/O_L | Arduino Digital I/O [Low Byte] Header Symbol | |
ISCP | Arduino ICSP I/O Header Symbol | |
POWER | Arduino Power Header Symbol |
List of packages
Name | View | Description |
---|---|---|
CONN-1X06 | 1x6 SIP header with pin 1 marked by a square pad. | |
CONN-1X08 | 1x8 SIP header with pin 1 marked by a square pad. | |
CONN-1X10 | 1x10 SIP header with pin 1 marked by a square pad. | |
CONN-2X03 | 2x3 DIP header with pin 1 marked by a square pad. |