Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
News
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
Top searches:
ESP8266 LM2596 7805 7 SEGMENT ARDUINO POTENTIOMETER RELAY SWITCH 1N4007 LCD 433 MHZ TO252 BLUETOOTH MODULE ATMEGA OLED ACS712 ARDUINO NANO MOSFET JST MURATA POLOLU TRANSFORMER 315 MHZ PCB ANTENNA TL431 LM3886
Ohter interesting searches:
VISHAY QFN LM393 TUBE TRACO 11F CSR CURRENT TRANSFORMER CY8C DISPLAY BATTERY AXICOM RESISTOR CSR MCP 433 MHZ PCB ANTENNA PHOENIX CONNECTOR AMS1117 ATMEL RASPBERRY OMRON IR2110 CC2541 RCA
- Home
- World of EAGLE Libraries
- Library Structure
EAGLE Library Structure
File details
| File name: | Wurth_Elektronik_Passive_rev16c.lbr |
| Uploaded by: | WEeiSos |
| Remarks: | This library is a part of the archive file wurth_elektronik_passive_rev16c.zip Show other files in the archive |
| Download options: | Download whole archive from DIYmodules.org ( 295.5 KiB )Download original file from DIYmodules.org ( 3,812.4 KiB )Download file converted to the latest EAGLE format ( 3,812.4 KiB ) |
Library description
Wurth Elektronik - EMC Components, Power Magnetics, Signal & Communications
-----
-----
-----
-----
-----
---------------------------
WE
---------------------------
Würth Elektronik
---------O---
----O--------
---------O---
----O--------
---------O---
More than you expect
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str.1
D-74638 Waldenburg
Tel: +49 (0)7942-945-0
Fax:+49 (0)7942-945-5000
http://www.we-online.com/eagle
libraries@we-online.com
Neither CadSoft nor WE-eiSos does warrant that this library is error-free or
that it meets your specific requirements.
Please contact us for more information.
Eagle Version 6, Library Revision 2016c, 2016-05-06
Copyright: Würth Elektronik
List of devices
| Name & variants | Symbol | Package |
|---|---|---|
| WE-AMT | MID-AMT Analog Modem Transformer
Details see: http://katalog.we-online.de/en/ctm/MID-AMT/?m
Updated on 2014-06-19 |
|
Variants: |
 |
    |
| WE-ASI | WE-ASI SMD Wire Wound Inductor
Characteristics Specially designed for sensors and actuators High current and small footprint High self resonant frequency Operating temperature: â40 ºC to +125 ºC Applications ASI-applications Low frequency filter design (kHz range) Details see: http://katalog.we-online.de/en/pbs/WE-ASI
Updated by Dan Xu 2014-06-19 |
|
Variants: |
 |
   |
| WE-BAL | WE-BAL Multilayer Chip Balun
Characteristics Low loss SMD Balun with balanced impedance of 50 to 200 Ω Operating temperature: â40 °C to +85 °C Power Capacity: 2 W max. Applications RF applications Wireless communication systems like Home RF, DECT, WLAN, Bluetooth, ZigBee ⦠Details see: http://katalog.we-online.de/en/pbs/WE-BAL
Updated by Dan Xu 2014-06-19 |
|
Variants: |
 |
   |
| WE-BPFB | ||
Variants: |
 |
 |
| WE-BPF_T1/5 | Multilayer Chip Band-Pass Filter
Characteristics Multilayer Chip Band-Pass Filter with low insertion loss and high attenuation SMD component in the sizes 0805 and 1008 Guaranteed filter characteristics over a wide temperature range Applications RF applications Wireless communication systems like DECT, PACS, PHS, GSM, WLAN, Bluetooth ⦠Details see: http://katalog.we-online.de/en/pbs/WE-BPF
Updated by Dan Xu 2014-06-19 |
|
Variants: |
 |
   |
| WE-BPF_T2 | Multilayer Chip Band-Pass Filter
Characteristics Multilayer Chip Band-Pass Filter with low insertion loss and high attenuation SMD component in the sizes 0805 and 1008 Guaranteed filter characteristics over a wide temperature range Applications RF applications Wireless communication systems like DECT, PACS, PHS, GSM, WLAN, Bluetooth ⦠Details see: http://katalog.we-online.de/en/pbs/WE-BPF
Updated by Dan Xu 2014-06-19 |
|
Variants: |
 |
 |
| WE-BPF_T3 | Multilayer Chip Band-Pass Filter
Characteristics Multilayer Chip Band-Pass Filter with low insertion loss and high attenuation SMD component in the sizes 0805 and 1008 Guaranteed filter characteristics over a wide temperature range Applications RF applications Wireless communication systems like DECT, PACS, PHS, GSM, WLAN, Bluetooth ⦠Details see: http://katalog.we-online.de/en/pbs/WE-BPF
Updated by Dan Xu 2014-06-19 |
|
Variants: |
|
 |
| WE-CAIR | WE-CAIR Air coil
Characteristics Inductance values from 1.65nH up to 120 nH Very high quality factor >100 High self-resonant frequency High currents up to 3.5 A 5%(10%) Inductance tolerance Pick and place process possible Good solderability (Tinned connector pins) Operating temperature: â40 °C to +125 °C Applications Especially for RF application Ideal for high current applications Broad band filter RF-Decoupling Details see: http://katalog.we-online.de/en/pbs/WE-CAIR
Created on 2014-05-19 |
|
Variants: |
|
     |
| WE-CBA | WE-CBA SMD EMI Suppression Ferrite Bead
Characteristics Reliable Ni-Sn electrodes High rated current up to 5A Recommended soldering: Reflow Operating temperature: -55°C to +125°C Applications * Perfect as data line filter and for uncoupling of distribution voltage *This special SMD chip bead ferrites can be put directly on the printed circuit board. They offer excellent anti-EMI properties and low DC-resistance. Placed very close next to the interference source even with smallest size 0402,maximal impedance at 1000 ⦠can be reached. *High Speed: "High Speed " SMD ferrites WE-CBF have lower impedance in the lower frequency ranges thus they have only a low attenuation for fast signals. Application e.g. USB 2.0, IEEE 1394,LVDS *Wide Band: "Wide Band" SMD ferrites WE-CBF already show high impedance in low frequency range. Therefore they are wide band through the whole spectrum. Application e.g. control signats, RS232, RS422, DC/DC converter *High Current: "High Current " SMD ferrites WE-CBF are designed for high current (over 1 A). The rated current refers to 40K self-heating. High current SMD ferrites are available in all there types (High Speed, Wide Band and High Frequency). Application e.g. power supply, DC/DC converter *Advice: Pay attention for the use of SMD-Ferrites for high current>1A and ambient temperature over +85°C that the rated current has to be reduced when temperature is above +85°C (Derating). *At+100°C environment temperature the maximal rated current has to add up to only 60% of the data sheet value ,without an overload of the component. Variant abbreviation WB means WIDE BAND HS means HIGH SPEED HC means HIGH CURRENT Details see: http://katalog.we-online.de/en/pbs/WE-CBA/ Created: 2015-02-02
|
|
Variants: |
|
          |
| WE-CBF | WE-CBF SMD EMI Suppression Ferrite Bead
Characteristics Reliable Ni-Sn electrodes High rated current up to 6 A Operating temperature: â55 ºC to +125 ºC Applications Perfect as data lined filter and for uncoupling of distribution voltage Variant abbreviation WB means WIDE BAND HS means HIGH SPEED HC means HIGH CURRENT Details see: http://katalog.we-online.de/en/pbs/WE-CBF
Updated on 2014-06-19 |
|
Variants: |
|
              |
| WE-CBF_HF | WE-CBF HF SMD EMI Suppression Ferrite Bead (High Frequency)
Characteristics Available in 3 types Modified internal layout increases the effective suppression range The impedance at 1 GHz are at least 3 times higher compared to the WE-CBF product family Operating temperature: â55 °C to +125 °C Applications Especially for the suppression of signal lines in the high frequency range For fast data lines: CPU, highspeed bus systems, HDD Variant abbreviation WB means WIDE BAND HS means HIGH SPEED HC means HIGH CURRENT Details see: http://katalog.we-online.de/en/pbs/WE-CBF_HF?
Updated on 2015-04-24 |
|
Variants: |
|
    |
| WE-CFWI | WE-CFWI Coupled Flatwire Inductor
Characteristics Very low RDC Low inductance drift over temperature Operating temperature: â40 °C up to +150 °C Coupled inductor with two identical windings More variants due to parallel and serie connection Applications High power switching regulators 1:1 flyback converter Buck, Boost, Sepic and Cuk Converter Switching regulators with secondary unregulated output voltage Battery Cell Charging Balancer Details see: http://katalog.we-online.de/en/pbs/WE-CFWI?
updated by Dan Xu 2014-07-15 |
|
Variants: |
 |
 |
| WE-CMB | WE-CMB Common Mode Power Line Choke
Characteristics With this product you can achieve high suppression of asymmetric interferences even at low frequency ranges Broadband filtering because of low capacitance winding technique Very compact design Highest possible current with small sizes High interference compression asymmetric interference rates also at low frequence range Custom designs on request Operating temperature: â40 ºC to +125 ºC Applications Power electronics Power line input and output filter For filtering of devices without a stable ground connection Radio interference suppression in motors Suppression of common mode noise Details see: http://katalog.we-online.de/en/pbs/WE-CMB?
Updated by Dan Xu 2014-06-30 |
|
Variants: |
 |
          |
| WE-CMBH | WE-CMBH Common Mode Power Line Choke (Horizontal)
Characteristics horizontal design for compact housings suppression even at low frequency ranges broadband screening because of low capacitance winding technique highest possible current with small sizes customer specific designs on request operating temperature: -40°C to +125°C Applications Power electronics Power line in- and output filter Radio interference suppression in motors suppression for common mode noise Details see: http://katalog.we-online.de/en/pbs/WE-CMBH?
Updated by Dan Xu 2014-07-15 |
|
Variants: |
|
  |
| WE-CMBNC | WE-CMBNC Common Mode Power Line Choke Nanocrystalline
Characteristics Very high permeability nanocrystalline core material Improved isolation through plastic case and winding spacer High and stable inductance values at high temperatures High rated currents Broadband suppression Small size Frequency range: 1 kHz-300 MHz Operating temperature: -40°C to +125°C Applications Power electronics Power line in- and output filter Radio interference suppression in motors Suppression for common mode noise Details see: http://katalog.we-online.de/en/pbs/WE-CMBNC/
Updated by Dan Xu 2014-06-23 |
|
Variants: |
|
                              |
| WE-CMB_HC | WE-CMB HC Common Mode Power Line Choke
Characteristics With this product you can achieve high suppression of asymmetric interferences even at low frequency ranges Broadband screening because of anti capacitance winding technique Very compact design Highest possible current with small sizes Operating temperature: â40 ºC to +125 ºC Custom designs on request Applications Power electronics Power line in- and output filter For filtering of devices without a stable ground connection Radio interference suppression in motors Details see: http://katalog.we-online.de/en/pbs/WE-CMB_HC?
Updated by Dan Xu 2014-06-23 |
|
Variants: |
|
 |
| WE-CMB_NIZN | WE-CMB NiZn Common Mode Power Line Choke
Characteristics Core material: Nickel-Zinc High suppression rates of asymmetric interference at high and medium frequencies Compact size High interference stability against RF interference and burst signals Noise suppression up to 300 MHz Operating temperature: â40 ºC to +125 ºC Custom designs on request Applications Power electronics Power line in- and output filter Optimized for burst signals Details see: hthttp://katalog.we-online.de/en/pbs/WE-CMB_NiZn
Updated by Dan Xu 2014-06-30 |
|
Variants: |
|
  |
| WE-CMS | WE-CMS Common Mode SMD Bead
Characteristics Impedance up to 200 Ω Operating temperature: â40 ºC to +85 ºC Applications Power supply systems Symmetric data lines Common mode interference Power electronics Details see: http://katalog.we-online.de/en/pbs/WE-CMS/?
Updated by Dan Xu 2014-06-30 |
|
Variants: |
|
  |
| WE-CNSW | WE-CNSW SMD Common Mode Line Filter
Characteristics High common mode noise suppression at high frequencies Small influence on high speed signals through winding symmetry Operating temperature: â40 ºC to +125 ºC (Size 0805/1206/1812); â40 ºC to +105 ºC (Size 0603) Applications USB 2.0 IEEE 1394 (Firewire) LVDS High Speed Data Lines LAN Details see: http://katalog.we-online.de/en/pbs/WE-CNSW
Updated by Dan Xu 2014-06-30 |
|
Variants: |
|
    |
| WE-CNSW_HF | WE-CNSW HF SMD Common Mode Line Filter (High Frequency)
Characteristics urrent compensated data line filter High common mode noise suppression at high frequencies Suitable for high data rates Small influence on high speed signals through winding symmetry Operating temperature: â40 ºC to +125 ºC Applications USB 3.0 USB 2.0 HDMI LVDS High-Speed data lines IEEE 1394 (Firewire) Details see: http://katalog.we-online.de/en/pbs/WE-CNSW_HF
|
|
Variants: |
|
 |
| WE-CPI | Chip Power Inductor WE-CPI - Extremely flat power inductor |
|
Variants: |
|
 |
| WE-CST | WE-CST Current Sense Transformer
Characteristics Height 5.33 mm max. Frequency 50 kHz to 1 MHz Primary current rating up to 10 A Operating temperature: â15 °C to +105 °C Applications AC current detection Switch mode power supply Details see: http://katalog.we-online.de/en/pbs/WE-CST
|
|
Variants: |
|
 |
| WE-DAA | MID-DAA V.90 Conexant SmartDAA(TM) Signal Transformers
Details see: http://katalog.we-online.de/en/ctm/MID-DAA/750082154?m
Updated by Dan Xu 2014-06-19 |
|
Variants: |
|
 |
| WE-DCT | WE-DCT Toroidal Double Power Choke
Characteristics Very low RDC Very low core losses Saturation current higher up to 120 A Low inductance drift over temperature Operating temperature: â40 °C up to +125 °C Coupled inductor with two identical windings More variants due to parallel and series connection Low leakage due to bifilar winding Applications high power switching regulators Solar inverter 1:1 flyback converter Buck, Boost, Sepic and CUK Converter Switching regulators with secondary unregulated output voltage Details see: http://katalog.we-online.de/en/pbs/WE-DCT
|
|
Variants: |
|
 |
| WE-DD | WE-DD SMD Shielded Coupled Inductor
Characteristics 1:1 transformer Double inductor with two identical windings 4 different sizes available Operating temperature: â40 ºC to +125 ºC Recommended solder profile: Reflow Custom designs on request Applications For SEPIC and CUK topologies Flyback applications Switching regulators with second, unregulated output voltages Details see: http://katalog.we-online.de/en/pbs/WE-DD
|
|
Variants: |
|
     |
| WE-DDF | SEPIC SMD Power Transformer WE-DDF - Extremely flat - 1:1 transformer - Double inductor with two identical windings -- SEPIC-switching regulators -- Switching regulators with second, unregulated output voltage |
|
Variants: |
|
 |
| WE-DSL_12PIN | SMD-ADSL Transformer WE-DSL
- IEC60950 compatible |
|
Variants: |
 |
 |
| WE-DSL_8PIN | SMD-VDSL Transformer WE-DSL
- IEC60950 compatible |
|
Variants: |
 |
  |
| WE-DSL_9PIN | SMD-ADSL Transformer WE-DSL
- IEC60950 compatible |
|
Variants: WE-DSL_9PIN_750050772_750051256 |
 |
  |
| WE-DS_210111003 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_gerade
Created on 2015-05-04 |
|
Variants: |
 |
 |
| WE-DS_210111023 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-STRAIGHT/210111023 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_210112013 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-BENT90 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_210112043 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_abgewinkelt
Created on 2015-05-04 |
|
Variants: |
|
|
| WE-DS_210113003 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_Loetkelch
Created on 2015-05-05 |
|
Variants: |
|
 |
| WE-DS_210113023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP 2016(C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_210611003 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_gerade
Created on 2015-05-04 |
|
Variants: |
|
 |
| WE-DS_210611023 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-STRAIGHT/210111023 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_210612013 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-BENT90 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_210612043 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_abgewinkelt
Created on 2015-05-04 |
|
Variants: |
|
|
| WE-DS_210613003 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_Loetkelch
Created on 2015-05-05 |
|
Variants: |
|
 |
| WE-DS_210613023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP/210613023 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_212111003 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_gerade
Created on 2015-05-04 |
|
Variants: |
 |
 |
| WE-DS_212111023 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-STRAIGHT/212111023 2016(C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_212112013 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-BENT90 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_212112043 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_abgewinkelt
Created on 2015-05-04 |
|
Variants: |
|
|
| WE-DS_212113003 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_Loetkelch
Created on 2015-05-05 |
|
Variants: |
|
 |
| WE-DS_212113023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP/212113023 2016(C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_212611003 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_gerade
Created on 2015-05-04 |
|
Variants: |
|
 |
| WE-DS_212611023 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-STRAIGHT/212611023 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_212612013 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-BENT90 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_212612043 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_abgewinkelt
Created on 2015-05-04 |
|
Variants: |
|
|
| WE-DS_212613003 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_Loetkelch
Created on 2015-05-05 |
|
Variants: |
|
 |
| WE-DS_212613023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP/210613023 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_214111003 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_gerade
Created on 2015-05-04 |
|
Variants: |
 |
 |
| WE-DS_214111023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP/210613023 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_214112013 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-BENT90 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_214112043 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_abgewinkelt
Created on 2015-05-04 |
|
Variants: |
|
|
| WE-DS_214113003 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_Loetkelch
Created on 2015-05-05 |
|
Variants: |
|
 |
| WE-DS_214113023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP/210613023 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_214611003 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_gerade
Created on 2015-05-04 |
|
Variants: |
|
 |
| WE-DS_214611023 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-STRAIGHT 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_214612013 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-BENT90 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_214612043 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_abgewinkelt
Created on 2015-05-04 |
|
Variants: |
|
|
| WE-DS_214613003 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_Loetkelch
Created on 2015-05-05 |
|
Variants: |
|
 |
| WE-DS_214613023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP/210613023 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_216111003 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_gerade
Created on 2015-05-04 |
|
Variants: |
 |
 |
| WE-DS_216111023 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-STRAIGHT 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_216112013 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-BENT90 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_216112043 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_abgewinkelt
Created on 2015-05-04 |
|
Variants: |
|
|
| WE-DS_216113003 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_Loetkelch
Created on 2015-05-05 |
|
Variants: |
|
 |
| WE-DS_216113023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_216611003 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_gerade
Created on 2015-05-04 |
|
Variants: |
|
 |
| WE-DS_216611023 | WE-DS D-SUB-Filter, Solder Pin Straight
Characteristics Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-STRAIGHT 2016 (C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_216612013 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-BENT90 2016 (C) Wurth Elektronik |
|
Variants: |
|
 |
| WE-DS_216612043 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Choice of earthing metal sheet or high speed earthing clip Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_abgewinkelt
Created on 2015-05-04 |
|
Variants: |
|
|
| WE-DS_216613003 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/Filter_Loetkelch
Created on 2015-05-05 |
|
Variants: |
|
 |
| WE-DS_216613023 | WE-DS D-SUB-Filter Solder Cup
Characteristics Easy soldering, even for small strand cross sections Standard type filtered with 1000 pF High attenuation: max. ⥠40 dB @ 180 MHz Choice of UNC 4/40 or through hole Rated voltage: 100 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-FILTER-SOLDER-CUP 2016(C) Wurth Elektronik |
|
Variants: |
|
|
| WE-DS_240117113 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Low size: 6.3 mm Rated voltage: 125 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-Filter Bent 90°
Created on 2015-05-04 |
|
Variants: |
 |
 |
| WE-DS_240617113 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Low size: 6.3 mm Rated voltage: 125 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-Filter Bent 90°
Created on 2015-05-04 |
|
Variants: |
|
 |
| WE-DS_242117113 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Low size: 6.3 mm Rated voltage: 125 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-Filter Bent 90°
Created on 2015-05-04 |
|
Variants: |
 |
 |
| WE-DS_242617113 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Low size: 6.3 mm Rated voltage: 125 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-Filter Bent 90°
Created on 2015-05-04 |
|
Variants: |
|
 |
| WE-DS_244117113 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Low size: 6.3 mm Rated voltage: 125 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-Filter Bent 90°
Created on 2015-05-04 |
|
Variants: |
 |
 |
| WE-DS_244617113 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Low size: 6.3 mm Rated voltage: 125 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-Filter Bent 90°
Created on 2015-05-04 |
|
Variants: |
|
 |
| WE-DS_246117113 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Low size: 6.3 mm Rated voltage: 125 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-Filter Bent 90°
Created on 2015-05-04 |
|
Variants: |
 |
 |
| WE-DS_246617113 | WE-DS D-SUB-Filter Connectors Bent 90°
Characteristics Standard type filtered with 1000 pF High attenuation of more than 40 dB @ 180 MHz Low size: 6.3 mm Rated voltage: 125 VDC Rated current @ 20 ºC: 5 A Withstand voltage: 250 VRMS Insulation resistance: min. 1000 MΩ Operating temperature: â55 ºC to +125 ºC Applications Filtering of interfaces External connection to -printer -sensor -display Details see: http://katalog.we-online.de/en/pbs/D-SUB-Filter Bent 90°
Created on 2015-05-04 |
|
Variants: |
|
 |
| WE-EHPI | WE-EHPI Energy Harvesting Coupled Inductor
Characteristics Low profile: 4 mm Small footprint 6 x 6 mm Very low secondary RDC Different turn ratios available Separated welding/soldering pad for a high reliable component Optimized, high reliable winding style Applications Wireless fire, alarm, gas and metering remote sensors driven by environmental energies based on energy harvesting voltage transformers like LTC3108/LTC3109 Sensors with predictive battery replacements in applications which are difficult to access Energy self-sufficient supply using subsequent installed sensors for energy harvesting Details see: http://katalog.we-online.de/en/pbs/WE-EHPI?
Updated on 2014-07-07 |
|
Variants: |
|
 |
| WE-EPLE | WE-EPLE USB 2.0 A Connector
It is recommended that the temperature of the part does not exceed +125°C under worst case conditions. Storage Temperature: -20°C to +60°C Operating Temperature: -40°C to +85°C Test conditions of Electrical Properties: 20°C, 33% RH if not specified differently Flamability rating: UL94-V0 Quality class: 1500 mating cycles |
|
Variants: |
 |
 |
| WE-EXB | WE-ExB Common Mode Power Line Choke
It is recommended that the temperature of the part does not exceed +125°C under worst case conditions.. Storage Temperature: -20°C to +60°C Operating Temperature: -40°C to +125°C Temperature Rise: < 55K Test conditions of Electrical Properties: 20°C, 33% RH if not specified differently |
|
Variants: |
 |
  |
| WE-FAMI | WE-FAMI THT Power Inductor Characteristics Optimization of material composition causes high performance Up to 19.7 A Saturation Current RDC values starting at 3.8 mΩ Shielded design Low stray field Application DC/DC converters Power supplies and battery chargers Home Entertainment Systems Portable devices like notebooks Details see: http://katalog.we-online.de/en/pbs/WE-FAMI
Updated on 2015-05-21 |
|
Variants: |
|
                     |
| WE-FB_LT35XX/LT3748_EE16/8/5 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
 |
| WE-FB_LT35XX/LT3748_EE20/10/6 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
 |
| WE-FB_LT35XX/LT3748_EFD20 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: WE-FB_LT35XX/LT3748_EFD20_750310617 WE-FB_LT35XX/LT3748_EFD20_750311385 WE-FB_LT35XX/LT3748_EFD20_750311597 WE-FB_LT35XX/LT3748_EFD20_750311598 WE-FB_LT35XX/LT3748_EFD20_750311605 |
 |
 |
| WE-FB_LT35XX/LT3748_EFD20_750311599 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
|
| WE-FB_LT35XX/LT3748_EFD20_750311600 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EFD20_750311604 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EFD20_750311608 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EFD25 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: WE-FB_LT35XX/LT3748_EFD25_750311589 WE-FB_LT35XX/LT3748_EFD25_750311590 WE-FB_LT35XX/LT3748_EFD25_750311591 WE-FB_LT35XX/LT3748_EFD25_750311592 WE-FB_LT35XX/LT3748_EFD25_750311593 WE-FB_LT35XX/LT3748_EFD25_750311594 |
|
 |
| WE-FB_LT35XX/LT3748_EFD25_750310988 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
|
| WE-FB_LT35XX/LT3748_EFD25_750311771 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
|
| WE-FB_LT35XX/LT3748_EFD25_750311783 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EFD25_750311889 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
|
| WE-FB_LT35XX/LT3748_EP10 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: WE-FB_LT35XX/LT3748_EP10_750310471 WE-FB_LT35XX/LT3748_EP10_750310559 WE-FB_LT35XX/LT3748_EP10_750310562 WE-FB_LT35XX/LT3748_EP10_750310563 WE-FB_LT35XX/LT3748_EP10_750311303 WE-FB_LT35XX/LT3748_EP10_750311304 WE-FB_LT35XX/LT3748_EP10_750311305 WE-FB_LT35XX/LT3748_EP10_750311306 WE-FB_LT35XX/LT3748_EP10_750311307 WE-FB_LT35XX/LT3748_EP10_750311308 |
 |
 |
| WE-FB_LT35XX/LT3748_EP10_750310564 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
|
| WE-FB_LT35XX/LT3748_EP10_750311342 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
|
| WE-FB_LT35XX/LT3748_EP13 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: WE-FB_LT35XX/LT3748_EP13_750311422 WE-FB_LT35XX/LT3748_EP13_750311423 WE-FB_LT35XX/LT3748_EP13_750311424 WE-FB_LT35XX/LT3748_EP13_750311456 WE-FB_LT35XX/LT3748_EP13_750311457 WE-FB_LT35XX/LT3748_EP13_750311458 WE-FB_LT35XX/LT3748_EP13_750311564 |
|
 |
| WE-FB_LT35XX/LT3748_EP13_750311439 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP13_750311486 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP13_750311681 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP13_750311688 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP13_750311689 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP13_750311856 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
 |
 |
| WE-FB_LT35XX/LT3748_EP5 | WE-FB Flyback Transformer suitable for LT3573/ LT3574/ LT3575/ LT3748
Characteristics easy design in solution less external components needed small board space low cost no optocoupler needed! long term reliability voltage control no aging same external parts for different output voltages easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2014-07-07 |
|
Variants: |
|
 |
| WE-FB_LT35XX/LT3748_EP7_750310799 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
 |
| WE-FB_LT35XX/LT3748_EP7_750311692 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP7_750370040 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP7_750370041 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP7_750370047 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
 |
| WE-FB_LT35XX/LT3748_EP7_750370058 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_EP7_750370059 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
|
| WE-FB_LT35XX/LT3748_ER9.5 | WE-FB Flyback Transformer LT35xx / LT3748
Characteristics Standard transformers for various output voltages currents available Easy design of custom power supply due to standard circuit and change of transformers and two components for feedback loop Isolation voltage up to 2.5 kV Applications Isolated power design Sensor interfaces Isolated telecom converters Power over Ethernet Details see: http://katalog.we-online.de/en/pbs/WE-FB_Linear?
Updated 2015-04-03 |
|
Variants: |
|
 |
| WE-FB_LT3751_EE35/18/10 | WE-FB 3751 Flyback Transformer for LT3751
Characteristics Isolation voltage: 1 kVAC Operating temperature: â40 ºC to +125 ºC (incl. self-heating) Especially designed for LT3751 Applications Transformer for capacitor charger or high voltage outputs Details see: http://katalog.we-online.de/en/pbs/WE-FB_3751?
Updated by Dan Xu 2014-07-07 |
|
Variants: |
 |
 |
| WE-FB_LT3751_EFD20_750032051 | WE-FB 3751 Flyback Transformer for LT3751
Characteristics Isolation voltage: 1 kVAC Operating temperature: â40 ºC to +125 ºC (incl. self-heating) Especially designed for LT3751 Applications Transformer for capacitor charger or high voltage outputs Details see: http://katalog.we-online.de/en/pbs/WE-FB_3751?
Updated by Dan Xu 2014-07-07 |
|
Variants: |
|
 |
| WE-FB_LT3751_EFD20_750032052 | WE-FB 3751 Flyback Transformer for LT3751
Characteristics Isolation voltage: 1 kVAC Operating temperature: â40 ºC to +125 ºC (incl. self-heating) Especially designed for LT3751 Applications Transformer for capacitor charger or high voltage outputs Details see: http://katalog.we-online.de/en/pbs/WE-FB_3751?
Updated by Dan Xu 2014-07-07 |
|
Variants: |
 |
 |
| WE-FC | WE-FC Common Mode Power Line Choke
Characteristics Closed rectangular ferrite core 2-section winding for excellent high frequency performance 1% stray inductance for symmetrical interference suppression Operating temperature: â25 °C to +125 °C Applications Switch mode power supplies Electronic ballasts for lamps Suppression of common mode noise Details see: http://katalog.we-online.de/en/pbs/WE-FC?
Updated by Dan Xu 2014-07-07 |
|
Variants: |
|
  |
| WE-FCL | WE-FCL Common Mode Power Line Choke Characteristics Approximate 1% stray inductance for symmetrical interference suppression Closed rectangular ferrite core Attenuation up to 75 dB with high rated current Inductance tolerance: +50 %/-30% Operating temperature: -40°C up to +125°C Application Mains filter Suppression of common mode noise Switch mode power supplies Electronic ballast applications Lighting White goods Details see: http://katalog.we-online.de/en/pbs/WE-FCL?
Updated on 2014-08-05 |
|
Variants: |
|
 |
| WE-FI | WE-FI Leaded Toroidal Line Choke Characteristics Applications Details see: http://katalog.we-online.de/pbs/datasheet/7447010.pdf
Updated on 2015-06-16 |
|
Variants: |
|
                                                  |
| WE-FLEX | WE-FLEX Flexible Transformer for DC/DC Converter
Characteristics Transformer with 6 identical windings 4 sizes with 5 different lengths of air gap each Insulation test voltage 500 VAC Low leakage inductance Operating temperature: â40 ºC to +125 ºC By using different circuits more than 375 transformer solutions and about 125 choke solutions possible. Consequently, quick prototyping possibilities Applications All kind of switching regulators -Flyback converters -Forward converters -Push-pull converters -Step-up/step-down converters -SEPIC converter Details see: http://katalog.we-online.de/en/pbs/WE-FLEX?
Updated by Dan Xu 2014-07-07 |
|
Variants: |
 |
    |
| WE-FLEX+ | WE-FLEX+ Flexible Transformer for DC/DC Converter
Characteristics Transformer with 6 identical windings Power up to 300 W possible Isolation voltage 500 VDC Low leakage inductance Operating temperature: â40 °C to +125 °C Applications All kind of switching regulators -Flyback converters -Forward converters -Push-pull converters -Step-up/step-down converters -SEPIC converter Details see: http://katalog.we-online.de/en/pbs/WE-FLEX_Plus?
Updated by Dan Xu 2014-07-07 |
|
Variants: |
|
   |
| WE-FPI | Flat Power Inductor WE-FPI - Extremely flat power inductor |
|
Variants: |
|
 |
| WE-GDTI | SMD Gate Drive Transformer -1 or 2 secondary windings -6 turrns ration -2500 Vac testing voltage -Operating voltage up tp 250V --Gate Drive --Signal --Power Details see: http://katalog.we-online.de/en/pbs/WE-GDTI?
Created by Dan Xu 2014-05-19 |
|
Variants: |
|
 |
| WE-GDTI_EP7_760301302 | SMD Gate Drive Transformer -1 or 2 secondary windings -6 turrns ration -2500 Vac testing voltage -Operating voltage up tp 250V --Gate Drive --Signal --Power Details see: http://katalog.we-online.de/en/pbs/WE-GDTI/760301302
Created by Dan Xu 2014-05-19 |
|
Variants: |
|
|
| WE-GDT_1SW | SMD Gate Drive Transformer WE-GDT Characteristics - small form factor EP5 - 1 or 2 secondary windings - 4 different turn rations - 1500VDC insulation test voltage - operating voltage up to 80V Applications -- Gate Drive -- Signal -- Power -- Synchronous Flyback |
|
Variants: |
|
|
| WE-GDT_2SW | SMD Gate Drive Transformer WE-GDT Characteristics - small form factor EP5 - 1 or 2 secondary windings - 4 different turn rations - 1500VDC insulation test voltage - operating voltage up to 80V Applications -- Gate Drive -- Signal -- Power -- Synchronous Flyback |
|
Variants: |
|
|
| WE-GF | SMD Wire Wound Inductor
Characteristics Wire wound on ferrite Operating temperature: â40 °C to +105 °C High resistance against dampness Applications RF circuits like tuner, transponder etc. RF amplifier circuits like antennas amplifier Oscillator Filter circuits Amplification circuits |
|
Variants: |
|
  |
| WE-GFH | SMD RF Choke WE-GFH
- Wire wound ferrite -- HF-circuits like tuner, transponder etc. |
|
Variants: |
|
   |
| WE-HCC | SMD High Current Cube Inductor
Characteristics Magnetically shielded Operating temperature: â40 °C to +125 °C Current capability up to 27 A Excellent saturation characteristics Applications Filter choke for DC/DC converter Single and polyphase buck converter Filter choke for motor electronics |
|
Variants: |
|
   |
| WE-HCF | SMD High Current Inductor
Characteristics Saturation current up to 75 A Very low core losses (MnZn) Magnetically shielded Operating temperature: â40 °C to +125 °C Current capability up to 32 A Applications Storage inductor for high efficiency DC/DC converters Single and polyphase buck converters Filter for audio applications Optimized for high current boost applications |
|
Variants: |
|
  |
| WE-HCI | SMD Flat Wire High Current Inductor
Characteristics Magnetically shielded Flat wire coil for low losses at high frequency Low stray field Operating temperature: â40 °C to +150/155 °C Applications Graphic cards Laptops Industrial computers Motherboards High current switching regulators DC/DC converter Polyphase-switching regulators Filter |
|
Variants: |
|
         |
| WE-HCM | SMD High Current Flat Wire Inductor
Characteristics Lowest core losses (MnZn) High saturation current up to 81 A Extremly low RDC Magnetically shielded RDC tolerance ± 7% Operating temperature: â40 °C to +125 °C Applications Multiphase switching regulator CPU/RAM power supply Power PC Filter |
|
Variants: |
|
          |
| WE-HV-LAN-TRANSFORMER-10/100/1000BT-749024012 | WE-LAN HV LAN-Transformer
Characteristics:
â¢Compliant with IEEE802.3 and 802.3af standards
â¢Operating temperature: 0 °C to +70 °C
â¢SMD
â¢4 kV Hipot test
Applications:
â¢Ethernet
â¢Compliant with most IC's for Ethernet applications
like Intel, AMD, Conexant, Realtek, etc.
â¢Hub, Router, Switches, medical applications
|
|
Variants: |
  |
 |
| WE-HV-LAN-TRANSFORMER-10/100BT(WITHOUT-CMC)-749014010 | WE-LAN HV LAN-Transformer
Characteristics:
â¢Compliant with IEEE802.3 and 802.3af standards
â¢Operating temperature: 0 °C to +70 °C
â¢SMD
â¢4 kV Hipot test
Applications:
â¢Ethernet
â¢Compliant with most IC's for Ethernet applications
like Intel, AMD, Conexant, Realtek, etc.
â¢Hub, Router, Switches, medical applications
|
|
Variants: |
 |
 |
| WE-HV-LAN-TRANSFORMER-10/100BT-749014011 | WE-LAN HV LAN-Transformer
Characteristics:
â¢Compliant with IEEE802.3 and 802.3af standards
â¢Operating temperature: 0 °C to +70 °C
â¢SMD
â¢4 kV Hipot test
Applications:
â¢Ethernet
â¢Compliant with most IC's for Ethernet applications
like Intel, AMD, Conexant, Realtek, etc.
â¢Hub, Router, Switches, medical applications
|
|
Variants: |
 |
 |
| WE-HV-LAN-TRANSFORMER-10/100BT-749014012 | WE-LAN HV LAN-Transformer
Characteristics:
â¢Compliant with IEEE802.3 and 802.3af standards
â¢Operating temperature: 0 °C to +70 °C
â¢SMD
â¢4 kV Hipot test
Applications:
â¢Ethernet
â¢Compliant with most IC's for Ethernet applications
like Intel, AMD, Conexant, Realtek, etc.
â¢Hub, Router, Switches, medical applications
|
|
Variants: |
 |
|
| WE-HV-LAN-TRANSFORMER-10/100BT-749014013 | WE-LAN HV LAN-Transformer
Characteristics:
â¢Compliant with IEEE802.3 and 802.3af standards
â¢Operating temperature: 0 °C to +70 °C
â¢SMD
â¢4 kV Hipot test
Applications:
â¢Ethernet
â¢Compliant with most IC's for Ethernet applications
like Intel, AMD, Conexant, Realtek, etc.
â¢Hub, Router, Switches, medical applications
|
|
Variants: |
 |
|
| WE-ISDN | SMD T1/E1 Pri Transformer WE-ISDN
- Small surface mount package |
|
Variants: |
 |
 |
| WE-KI | SMD Wire Wound Ceramic Inductor
Characteristics WE-KI series offers you an excellent Q factor and highest possible self resonant frequencies up to 12.5 GHz Inductance tolerances: 5% (2% on request) High thermal stability Operating temperature: â40°C to +125°C Applications Especially developed for high frequency applications RF transceiver/communications Bluetooth Wireless LAN |
|
Variants: |
|
          |
| WE-KIHQ | SMD Wire Wound Ceramic Inductor WE-KIHQ - High current - Highest Quality factor in size 0805 - up to 98 - High thermal stability - High SRF -- Bluetooth -- Wireless LAN -- RF oscillation circuit -- IF impedance matching -- IG choke |
|
Variants: |
|
|
| WE-KIL | SMD Wire Wound Ceramic Inductor WE-KIL - Low profile - High Q values -- Bluetooth -- Wireless LAN -- RF oscillation circuit -- IF impedance matching |
|
Variants: |
|
|
| WE-LAN-10/100-BASE-T,749010011 | LAN-Transformer WE-LAN 10/100 Base T
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,7490100110A | LAN-Transformer WE-LAN 10/100 Base T
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,7490100111 | LAN Transformer
Characteristics Compliant with standards: IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af and IEEE 802.3at SMD Applications Ethernet speed up to 10 Gbit/s Power over Ethernet PoE and PoE+ Compliant with most ICâs for Ethernet applications such as Intel, AMD, Globespan and Realtek Applications: Hub, Router, Switches |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,7490100111A | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,749010012 | LAN-Transformer WE-LAN 10/100 Base T
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,749010012A | LAN-Transformer WE-LAN 10/100 Base T
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
|
| WE-LAN-10/100-BASE-T,749010014 | LAN-Transformer WE-LAN 10/100 Base T
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,7490100161A | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,749010040 | LAN-Transformer WE-LAN 10/100 Base T
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,7490101120 | LAN-Transformer WE-LAN 10/100 Base T
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,749013011A | UtLAN
10/100 Base-T SMD Transformer 1 Port WE-LAN - SMD
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,7490140112 | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,749014018 | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,POE+,7490120110 | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,POE+,74901201X | LAN-Transformer WE-LAN 10/100 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,POE,749013011 | LAN-Transformer WE-LAN 10/100 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,POE,749013021 | LAN-Transformer WE-LAN 10/100 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100-BASE-T,POE,749013040 | LAN-Transformer WE-LAN 10/100 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,749020010 | LAN-Transformer WE-LAN 10/100/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,749020011 | LAN-Transformer WE-LAN 10/100/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,749020013 | LAN-Transformer WE-LAN 10/100/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,749020020A | LAN-Transformer WE-LAN 10/100/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,749020023 | LAN-Transformer WE-LAN 10/100/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,749020100 | LAN-Transformer WE-LAN 10/10/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,749020111 | LAN-Transformer WE-LAN 10/10/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,POE+,749022015 | LAN-Transformer WE-LAN 10/10/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,POE,749023010A | LAN-Transformer WE-LAN 10/10/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,POE,749023015 | LAN-Transformer WE-LAN 10/10/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,POE,749023016 | LAN-Transformer WE-LAN 10/10/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10/100/1000-BASE-T,POE,749023020 | LAN-Transformer WE-LAN 10/10/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-1000-BASE-T,749022012X | LAN-Transformer WE-LAN 1000 BaseT 4P POE |
|
Variants: |
 |
 |
| WE-LAN-10G,749050017 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
 |
 |
| WE-LAN-10G,749050018 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
|
|
| WE-LAN-10G,749052011 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
|
 |
| WE-LAN-10G,749052012 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
|
|
| WE-LAN-10G,749052050 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
|
|
| WE-LAN-10G,749053010 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
|
|
| WE-LAN-10G,749053011 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
|
|
| WE-LAN-10G,749053012 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
|
|
| WE-LAN-10G,749053013 |
LAN-Transformer WE-LAN 10G
|
|
Variants: |
|
|
| WE-LAN-10G-BASE-T,749050010A | LAN-Transformer WE-LAN 10/10/1000 Base Tx
- Compliant with IEEE 802.3 standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN-10G_749050010U | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
|
 |
| WE-LAN_749020010A//749020011A | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN_7490200136 | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LAN_749020111A | WE-LAN LAN Transformer 10/100 Base T
- Compliant with IEEE 802.3, IEEE 802.3af and IEEE 802.3at standards
-- Ethernet |
|
Variants: |
 |
 |
| WE-LF | Common Mode Power Line Choke
Characteristics Easy assembly due to 4 pole housing Compact, small size 4 soldering pins for perfect mechanical decoupling Toroidal core choke with sector winding High interference suppression for common mode interferences in low and middle frequency ranges Low stray field Operating temperature: â25 ºC to +125 ºC Custom designs on request Applications Power line filter Power electronics SMPS Suppression of common mode noise |
|
Variants: |
|
        |
| WE-LF_SMD | Common Mode Power Line Choke
Characteristics SMD power line choke Compact size Toroidal core with sector winding High attenuation of common mode interferences in low and middle frequency range Operating temperature: â25 ºC to +125 ºC Applications Mains filter Power electronics SMPS |
|
Variants: |
|
 |
| WE-LHMI | SMD Low Profile High Current Molded Inductor
Characteristics Compact design Magnetically shielded High current capability Handles high transient current spikes No acoustic noise and no leakage field Frequency range up to 5 MHz Operating temperature: â40 °C to +125 °C Applications DC/DC converters for high current power supplies DC/DC converters for Field Programmable Gate Array (FPGA) POL converters Portable power like PDA, digital cameras Mainboards/graphic cards Battery powered devices |
|
Variants: |
|
          |
| WE-LLCR | Characteristics
Characteristics Transformer for high efficiency power supply Input voltage 360â400 VDC Switching frequency 70â120 kHz Output power 150 Wâ250 W Testing voltage 4 kVAC Litz wire for low eddy current losses Defined leakage inductance for use without additional resonant inductor Applications Power supplies for PC, netbook, LED lighting and other power supplies High efficient resonant converters Details see: http://katalog.we-online.de/en/pbs/WE-LLCR?
Updated by Dan Xu 2014-07-07 |
|
Variants: |
|
   |
| WE-LPF_0603 | Multilayer Chip Low-Pass Filter
Characteristics Operating temperature: â40 °C to +85 °C Power capacity up to 3 W Low insertion loss and high attenuation in the stop-band Applications RF applications Wireless communication systems like DECT, PACS, PHS, GSM, WLAN, Bluetooth ⦠Details see: http://katalog.we-online.de/en/pbs/WE-LPF?
Updated by Dan Xu 2014-07-08 |
|
Variants: |
 |
 |
| WE-LPF_0805 | Multilayer Chip Low-Pass Filter
Characteristics Operating temperature: â40 °C to +85 °C Power capacity up to 3 W Low insertion loss and high attenuation in the stop-band Applications RF applications Wireless communication systems like DECT, PACS, PHS, GSM, WLAN, Bluetooth ⦠Details see: http://katalog.we-online.de/en/pbs/WE-LPF?
Updated by Dan Xu 2014-07-08 |
|
Variants: |
 |
 |
| WE-LQ | SMD Inductor
Characteristics Miniature chip inductor wound on a special ferrite core Small inductances for compact circuits High Q at high frequencies Low DC-resistance Operating temperature: â40 ºC to +125 ºC Applications Low power DC/DC-converters from Linear Technology, National Semiconductor, Texas Instruments, Fairchild Semiconductor, ON Semiconductor, STMicroelectronics, Maxim, MPS, Semtech, Exar, Analogic Tech, Diodes and Cologne Chip EMI-Filtering RF-circuits Details see: http://katalog.we-online.de/en/pbs/WE-LQ?
Updated by Dan Xu 2014-07-08 |
|
Variants: |
|
  |
| WE-LQS | SMD Shielded Tiny Power Inductor
Characteristics Tiny Power Inductor design 1.7 times more current in comparison with unshielded versions Robust design & high durability Low RDC Magnetically shielded with magnetic glue reducing buzz noise in ultra-low levels Operating Temperature: â40 °C to +125 °C Applications Integrated DC/DC Converters Switching controllers which required high efficiency Portable power (Smartphones, digital cameras, Tablets, etc.) Embedded laptops and PCs Big sizes (5040, 60xx, 8040) used for shock-proof circuits Details see: http://katalog.we-online.de/en/pbs/WE-LQS
Created by Dan Xu 2014-05-21 |
|
Variants: |
|
            |
| WE-MAIA | WE-MAIA SMD Power Inductor
Characteristics Magnetic iron alloy allows high rated currents Compact design Magnetically shielded Hight current capability and handles hight transient current spikes No acoustic noise and no leakage flux noise Operating temperature range:-40°C up to 125°C Applications Power supplies for smartphones, tablet PCs and other mobile devices DC/DC-converter for high current power supplies DC/DC-converter for Field Programmable Gate Array (FPGA) POL-converters Portable power like PDA, digital camera Mainboards/graphic cards Battery powered devices Wireless communication devices Details see: http://katalog.we-online.de/en/pbs/WE-MAIA/ Created: 2015-02-04
|
|
Variants: |
|
      |
| WE-MAPI | SMD Metal Alloy Power Inductor
Characteristics Magnetic iron alloy allows high rated currents Compact design Magnetically shielded High current capability and handles high transient current spikes Low acoustic noise and low leakage flux noise Operating temperature: â40 °C to 125 °C Applications DC/DC-converter for high current power supplies DC/DC-converter for Field Programmable Gate Array (FPGA) POL-converters Portable power like PDA, digital camera Mainboards/graphic cards Battery powered devices Wireless communication devices Power supplies for smartphones, tablet PCs and other mobile devices Details see: http://katalog.we-online.de/en/pbs/WE-MAPI?
Updated by Dan Xu 2014-07-08 |
|
Variants: |
|
            |
| WE-MCA_2PIN | Multilayer Chip Antenna
Characteristics SMD Multilayer Chip Antenna Extremely low profile Very light component Power capacity: 5 W max. Omni-directional Operating temperature: â40 °C to +85 °C High gain Applications applications WLAN Home RF (868 MHz) Bluetooth applications GSM 900 ISM 868/2400 |
|
Variants: |
 |
     |
| WE-MCA_7488910092 | Multilayer Chip Antenna
Characteristics SMD Multilayer Chip Antenna Extremely low profile Very light component Power capacity: 5 W max. Omni-directional Operating temperature: â40 °C to +85 °C High gain Applications applications WLAN Home RF (868 MHz) Bluetooth applications GSM 900 ISM 868/2400 |
|
Variants: |
 |
 |
| WE-MCA_7488910235 | Multilayer Chip Antenna
Characteristics SMD Multilayer Chip Antenna Extremely low profile Very light component Power capacity: 5 W max. Omni-directional Operating temperature: â40 °C to +85 °C High gain Applications applications WLAN Home RF (868 MHz) Bluetooth applications GSM 900 ISM 868/2400 |
|
Variants: |
|
 |
| WE-MCA_7488912455 | Multilayer Chip Antenna
Characteristics SMD Multilayer Chip Antenna Extremely low profile Very light component Power capacity: 5 W max. Omni-directional Operating temperature: â40 °C to +85 °C High gain Applications applications WLAN Home RF (868 MHz) Bluetooth applications GSM 900 ISM 868/2400 |
|
Variants: |
 |
 |
| WE-MCA_7488920245 | Multilayer Chip Antenna
Characteristics SMD Multilayer Chip Antenna Extremely low profile Very light component Power capacity: 5 W max. Omni-directional Operating temperature: â40 °C to +85 °C High gain Applications applications WLAN Home RF (868 MHz) Bluetooth applications GSM 900 ISM 868/2400 |
|
Variants: |
 |
 |
| WE-MI | SMD Multilayer Inductor
Characteristics Smallest inductor possible for less space needed on the printed circuit board and therefore perfect suitable for high density mounting No cross coupling because of closed magnetic circuits No crosstalk Operating temperature: â55 °C to +125 °C Applications Filter circuits Oscillators Adjustment networks Discretely built T- or Ï-Filter |
|
Variants: |
|
   |
| WE-MK | Multilayer Ceramic SMD Inductor
Characteristics Windings printed on ceramic substrate Extremely high self resonant frequency > 17 GHz Inductive tolerances of 5%; ± 0.3 nH Operating temperature: â40°C to +120°C Inductance is stable over temperature Applications High frequency circuits Bluetooth Wireless LAN Filter circuits Oscillators Pagers Laptops PCMCIA-cards |
|
Variants: |
|
   |
| WE-MLS-3WAY | Multiline EMI Suppression Ferrite
Characteristics High impedance common mode inductor with 2x2 windings made by PCB line connection High rated current with typ. 4 A Broadband filtering because of the NiZn-ferrite core RF common mode inductor for 2, 3 or 4 lines in one component Compact size Operating temperature: â25 ºC to +125 ºC Custom designs on request With the appropriate layout (see below) the impedance (i.e. 4 windings) respectively the current (parallel circuit) could be increased Applications Perfect suitable for absorption of common or differential mode interferences in the field of EMC High-current DC output filters of power supplies e.g. battery chargers, industrial power supplies With one turn the component performes like a 3 or 4 times common mode choke for the signal 4-line sensor application |
|
Variants: |
 |
 |
| WE-MLS-4WAY | Multiline EMI Suppression Ferrite
Characteristics High impedance common mode inductor with 2x2 windings made by PCB line connection High rated current with typ. 4 A Broadband filtering because of the NiZn-ferrite core RF common mode inductor for 2, 3 or 4 lines in one component Compact size Operating temperature: â25 ºC to +125 ºC Custom designs on request With the appropriate layout (see below) the impedance (i.e. 4 windings) respectively the current (parallel circuit) could be increased Applications Perfect suitable for absorption of common or differential mode interferences in the field of EMC High-current DC output filters of power supplies e.g. battery chargers, industrial power supplies With one turn the component performes like a 3 or 4 times common mode choke for the signal 4-line sensor application |
|
Variants: |
 |
     |
| WE-MPSB | SMD EMI Multilayer Power Suppression Bead
Characteristics High rated current up to 10 A Operating temperature: â55 ºC to +125 ºC Very low RDC Applications 77 EMI suppression of DC/DC converters and DC power supply Variant abbreviation WB means WIDE BAND HS means HIGH SPEED HC means HIGH CURRENT |
|
Variants: |
|
          |
| WE-PBF | Flat Wire High Current SMD Ferrite Bead
Characteristics Flat wire Suitable for applications with high currents up to 6 A Glued version: High mechanical stability Operating temperature: â55 ºC to +125 ºC Applications Voltage supply for high load current Glued version: Especially for applications with permanent vibrations |
|
Variants: |
|
   |
| WE-PD | SMD Shielded Power Inductor
Characteristics Magnetically shielded version which results in a low leakage field High Saturation currents up to 25 A Very low self-losses at high switching frequencyâs Wide inductances spectrum available at all sizes Operating temperature: â40 °C to +125 °C Applications Perfectly suitable for switching regulators with extremely high efficiency Integrated DC/DC- converter Switching regulators with low operating voltages (Graphic cards, embedded PC-Cards, Mainboards) Plastic base: Because of the one piece construction these are more suitable for high vibration or shock applications |
|
Variants: |
|
     |
| WE-PD2 | SMD Power Inductor
Characteristics Open size Saturation currents up to 14 A Low tolerances at high inductance values Operating temperature: â40 °C to +125 °C Applications Integrated DC/DC-converter Switching regulators with low operating voltages (Graphic cards, embedded PC-Cards, Mainboards) Optimal attenuation in MHz frequency range |
|
Variants: |
|
    |
| WE-PD2A | WE-PD2A SMD Power Inductor
Characteristics Open size Current capability up to 14A Operating temperature:-40°C to 125°C Recommended soder profile: Reflow Applications switching regulators with low operating voltage (navigation system, air conditioning, entertainment, park assistance control) Integrated DC/DC-converter Perfectly suitable for switching regulators with extremely high efficiency Details see: http://katalog.we-online.de/en/pbs/WE-PD2A/ Created: 2015-02-04
|
|
Variants: |
|
    |
| WE-PD2SR | SMD Shielded Power Inductor
Characteristics Magnetic shielded version from the WE-PD2, which results in a low leakage field High saturation current due the self-centering shielding ring construction Pin compatible with the PD2 size 7850 Recommended solder profile: Reflow Operating temperature: â40 °C up to +125 °C Applications Switching regulators with low operation voltage like in portable devices |
|
Variants: |
|
 |
| WE-PD2_HV | High Voltage SMD Power Inductor
Characteristics Unshielded construction Designed for 400 VDC Operating temperature: â40 °C to +125 °C Applications Non-isolated buck or buck-boost converter like Power Integrations LinkSwitch-TN Constant current LED driver Utility metering Filter for power supply |
|
Variants: |
|
 |
| WE-PD3 | SMD Shielded Power Inductor
Characteristics Magnetically shielded version which results in a low leakage field Working frequency up to 10 MHz Operating temperature: â40 °C to +125 °C Applications EMI-filter Perfectly suitable for switching regulators e.g. National Semiconductor, Linear Technology, Texas Instruments, Maxim, Semtech, ON Semiconductor, Cologne Chip, STMicroelectronics, Maxim, MPS, Diodes, Analogic Tech and Exar |
|
Variants: |
|
    |
| WE-PD4 | SMD Power Inductor
Current loading up to 38 A Compact size Low-loss ferrite core Application frequency range up to 10 MHz Operating temperature: â40 °C to +125 °C Applications Noise suppression Perfectly suitable for switching regulators e.g. National Semiconductor, Linear Technology, Maxim, Semtech, Texas Instruments, Fairchild Semiconductor, Cologne Chip, ON Semiconductor, STMicroelectronics, MPS, Exar, Analogic Tech and Diodes |
|
Variants: |
|
 |
| WE-PDA | WE-PDA SMD Shielded Power Inductor
Characteristics Wire connection:welding technology Operating temperature:-40°C up to 125°C Highest possible current loading for SMD Inductors Magnetically shielded version which results in a low leakage field High storage capacity Low self-losses Core Material:NiZn Applications Multimedia applications Switching regulators with low operating voltages (Computer, Notebook, smart phones) Integrated DC/DC-converter Perfect suitable for switching regulators with exrtemely high efficiency (>86%) Details see: http://katalog.we-online.de/en/pbs/WE-PDA/ Created: 2015-01-30
|
|
Variants: |
|
     |
| WE-PDF | SMD Shielded Flatwire Power Inductor
Characteristics Core material: NiZn Flat wire power inductor Advanced operating temperature: â40 °C up to +150 °C Magnetically shielded which results in a low leakage field Low self-losses High saturation current Flat wire coil for lower losses at high frequency ranges High Self Resonance Frequency Applications Suitable for high frequency switching regulators |
|
Variants: |
|
 |
| WE-PD_HV | High Voltage SMD Power Inductor
Characteristics Shielded part for ideal wire protection Operating Temperature: â40 °C to +125 °C Magnetically schielded Designed for 400 VDC Applications Applications Non-isolated buck or buck-boost converter like Power Integrations LinkSwitch-TN Constant current LED driver Utility metering Filter for power supply |
|
Variants: |
|
 |
| WE-PF | SMD EMI Suppression Power Ferrite
Characteristics Suitable for applications with high currents up to 10 A Magnetically shielded version Core material NiZn for the use in a wide frequency range Operating temperature: â40 ºC to +125 ºC Applications Interference suppression in motors Switch mode power supply Power electronics PWM controller |
|
Variants: |
|
 |
| WE-PFC | PFC Choke
Characteristics PFC choke for power up to 250 W Operating temperature: â40 °C to +125 °C PQ 38/11 construction height |
|
Variants: |
|
        |
| WE-PMCI | WE-PMCI Power Molded Chip Inductor Characteristics Applications Details see: http://katalog.we-online.de/en/pbs/WE-PMCI
|
|
Variants: |
|
        |
| WE-PMI | Power Multilayer Inductor
Characteristics Compact multilayer type Suitable for applications with high currents up to 2.7 A Smallest RDC-Values starting at 40 mΩ Magnetically shielded construction: No crosstalk Operating temperature: â40 °C to +125 °C Available in four sizes and three different types (Low Profile, Low RDC & High Saturation Current) Recommended soldering profile: Reflow Applications DC/DC converters especially at high switching frequencies > 1 MHz Electronic devices with very low profile Portable devices like Smart Phones, Tablets, Notebooks and Digital Cameras |
|
Variants: |
|
     |
| WE-PMMI | WE-PMMI Power Molded Multilayer Inductor Characteristics Compact multilayer type Suitable for applications with high currents up to 3.5A. Very high DC-bias current up to 4A. Smallest RDC-Values starting at 15 mΩ Magnetically shielded construction: No crosstalk Operating temperature: â40 °C to +125 °C Available in two sizes and two different types (Low Profile, Standard) Recommended soldering profile: Reflow Applications Applications DC/DC converters especially at high switching frequencies > 1 MHz Electronic portable devices with very low profile Portable devices like Smart Phones, Tablets, Notebooks, Digital Cameras, HDD's Details see: http://katalog.we-online.de/en/pbs/WE-PMMI
|
|
Variants: |
|
  |
| WE-POE | Power over Ethernet Transformer
Characteristics Flyback transformer designed for PoE PDs Input voltage: 36 V to 57 V Switching frequencies: 200â500 kHz Operating temperature: â40 ºC to +125 ºC Insulation test voltage: 1.5 kVAC/1 min Different output powers and voltages available Applications Suitable for PoE ICâs like LTC4267, TPS 23750, TPS 23770, LM5070, LM 5071, LM 5072 |
|
Variants: |
 |
   |
| WE-POE+_EFD20 | Power over Ethernet Plus Transformer
Characteristics Designed to meet 25 W PoE+ requirements of IEEE802.3at Frequency range: 250â400 kHz Input voltage range: 36â72 V 1.5 kV Hipot test between primary and secondary Operating temperature: â40 °C to +125 °C Applications PoE+ powered devices IP phones WLAN-Access points Security cameras |
|
Variants: |
|
 |
| WE-POE+_EP13 | Power over Ethernet Plus Transformer
Characteristics Designed to meet 25 W PoE+ requirements of IEEE802.3at Frequency range: 250â400 kHz Input voltage range: 36â72 V 1.5 kV Hipot test between primary and secondary Operating temperature: â40 °C to +125 °C Applications PoE+ powered devices IP phones WLAN-Access points Security cameras |
|
Variants: |
 |
 |
| WE-POEH_EPQ13 | WE-PoEH Power over Ethernet High Power Transformer
Characteristics DFlyback or Forward Transformer Input voltage: 9 V or 33 V to 57 V Switching frequencies: 200-400 kHz Operating temperature: -40°C up to +125°C Insulation test voltage: 1.5 kVAC Different output voltages available Optimized core and bobbin design for 30% more power handling Standard footprint to EP13 Applications PoE and PoE+ powered devices Telecom Industrial applications WLAN acess point Safety cameras |
|
Variants: |
|
 |
| WE-POE_EP10 | Power over Ethernet Transformer
Characteristics Flyback transformer designed for PoE PDs Input voltage: 36 V to 57 V Switching frequencies: 200â500 kHz Operating temperature: â40 ºC to +125 ºC Insulation test voltage: 1.5 kVAC/1 min Different output powers and voltages available Applications Suitable for PoE ICâs like LTC4267, TPS 23750, TPS 23770, LM5070, LM 5071, LM 5072 |
|
Variants: |
|
 |
| WE-POE_EP13 | Power over Ethernet Transformer
Characteristics Flyback transformer designed for PoE PDs Input voltage: 36 V to 57 V Switching frequencies: 200â500 kHz Operating temperature: â40 ºC to +125 ºC Insulation test voltage: 1.5 kVAC/1 min Different output powers and voltages available Applications Suitable for PoE ICâs like LTC4267, TPS 23750, TPS 23770, LM5070, LM 5071, LM 5072 |
|
Variants: |
|
|
| WE-PP_750031160 | WE-PP 750034460 - L= 500µH - Turns ration 1:2.7 -- for LTC1535/MAX3535 |
|
Variants: |
|
 |
| WE-RFH | Ferrite SMD Inductor
Characteristics High thermal stability Operating temperature: â40 ºC to +85 ºC High inductances High currents Applications Developed especially for RF applications Perfect for telecommunication applications |
|
Variants: |
|
 |
| WE-RFI | Ferrite SMD Inductor
Characteristics High thermal stability Operating temperature: â40 °C to +85 °C Applications Especially developed for RF applications RFID Low frequency radio applications (Keyless) |
|
Variants: |
|
  |
| WE-RJ45-LAN,SURGE-PROTECTION,7499010441 | WE-RJ45 LAN
THT Surge Protection
Characteristics:
With two integrated gas discharge tubes
High surge withstand voltage
Small capacitance of surge device
Application:
Telecom devices
Bridges, hubs, router, power line adapter
LAN networks in rough environments
|
|
Variants: |
  |
 |
| WE-RJ45-LAN-10/100/1000-BT-WITH-USB3.0-7497110616 |
Order Code 7497110616
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1 +2USB
Application Standard USB3.0
Tab Position UP
LED (Left-Right) YELLOW-GREEN/OANGE
EMI Fingers NO
|
|
Variants: |
     |
 |
| WE-RJ45-LAN-10/100/1000BT-7497111611A |
Order Code 7497111611A
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1 + 2xUSB
Application Standard USB2.0
Tab Position UP
LED (Left-Right) GREEN/ORANGE-YELLOW
EMI Fingers YES
|
|
Variants: |
    |
 |
| WE-RJ45-LAN-10/100/1000BT-7499110122 |
Order Code 7499110122
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position Down
LED (Left-Right) YELLOW-GREEN
EMI Fingers No
|
|
Variants: |
  |
 |
| WE-RJ45-LAN-10/100/1000BT-7499110123 |
Order Code 7499110123
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position VERTICAL
LED (Left-Right) YELLOW-GREEN
EMI Fingers No
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100/1000BT-7499110124 |
Order Code 7499110124
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) GREEN/YELLOW-GREEN
EMI Fingers No
|
|
Variants: |
  |
 |
| WE-RJ45-LAN-10/100/1000BT-7499111000A |
Order Code 7499111000A
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) NONE
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100/1000BT-7499111121A | RJ45 LAN Transformer
Characteristics RJ45 connector with integrated transformer common mode choke Available in SMD, THT and THT with USB 350 μH min. OCL with 8 mA bias Complies with IEEE 802.3 Extended temperature range from â40 °C to +85 °C available PoE/PoE+ Applications XDSL Modems Embedded PC LAN network applications Hub, Router, Switches |
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100/1000BT-7499111221A |
Order Code 7499111221A
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) GREEN-GREEN
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100/1000BT-7499111446 |
Order Code 7499111446
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position DOWN
LED (Left-Right) GREEN/YELLOW-GREEN/YELLOW
EMI Fingers yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100/1000BT-7499111447 |
Order Code 7499111447
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position Up
LED (Left-Right) GREEN/YELLOW-GREEN/YELLOW
EMI Fingers yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100/1000BT-7499151120 |
Order Code 7499151120
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x2 Stacked
Application Standard
Tab Position UP & DOWN
LED (Left-Right) YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100/1000BT-POE-7499511440 |
Order Code 7499511440
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application PoE
Tab Position UP
LED (Left-Right) GREEN/YELLOW-GREEN/YELLOW
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100/1000BT-SMD-7498111001 |
Order Code 7498111001
Design SMD
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) NONE
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100/1000BT-SMD-7498111120R |
Order Code 7498111120R
Design SMD
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100BASE-T-THT74990111211 | ||
Variants: |
 |
 |
| WE-RJ45-LAN-10/100BT-74990100011A |
Order Code 74990100011A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) NONE
EMI Fingers No
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100BT-7499010001A |
Order Code 7499010001A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) NONE
EMI Fingers No
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-7499010004A |
Order Code 7499010004A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position Down
LED (Left-Right) NONE
EMI Fingers No
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-74990101210 |
Order Code 74990101210
Design THT
xBase-T 10/100 Base-T
Ports 1x1 Vertical
Application Standard
Tab Position Vertical
LED (Left-Right) Yellow-Green
EMI Fingers No
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100BT-7499010121A |
Order Code 7499010121A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) Yellow-Green
EMI Fingers No
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-7499010211A |
Order Code 7499010211A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position DOWN
LED (Left-Right) Green-Yellow
EMI Fingers No
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-74990110010 |
Order Code 74990110010
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) NONE
EMI Fingers Yes
|
|
Variants: |
|
|
| WE-RJ45-LAN-10/100BT-7499011001A |
Order Code 7499011001A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position Down
LED (Left-Right) NONE
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-7499011002A |
Order Code 7499011002A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position Down
LED (Left-Right) NONE
EMI Fingers Yes
|
|
Variants: |
|
|
| WE-RJ45-LAN-10/100BT-74990110030 |
Order Code 74990110030
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) NONE
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-7499011121A |
Order Code 7499011121A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position DOWN
LED (Left-Right) Yellow-Green
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-74990112116A |
Order Code 74990112116A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) Green-Yellow
EMI Fingers Yes
|
|
Variants: |
|
|
| WE-RJ45-LAN-10/100BT-7499011222A |
Order Code 7499011222A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position DOWN
LED (Left-Right) Green-Green
EMI Fingers Yes
|
|
Variants: |
|
|
| WE-RJ45-LAN-10/100BT-7499021125 |
Order Code 7499021125
Design THT
xBase-T 10/100 Base-T
Ports 1x2 HORIZONTAL
Application Standard
Tab Position DOWN
LED (Left-Right) YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-7499031120A |
Order Code 7499031120A
Design THT
xBase-T 10/100 Base-T
Ports 1x4 HORIZONTAL
Application Standard
Tab Position DOWN
LED (Left-Right) YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-7499051002 |
Order Code 7499051002
Design THT
xBase-T 10/100 Base-T
Ports 1x2 STACKED
Application Standard
Tab Position UP & DOWN
LED (Left-Right) NONE
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-POE-7499210001A |
Order Code 7499210001A
Design THT
xBase-T 10/100 Base-T PoE
Ports 1x1
Application PoE
Tab Position UP
LED (Left-Right) NONE
EMI Fingers No
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100BT-POE-7499210121A |
Order Code 7499210121A
Design THT
xBase-T 10/100 Base-T PoE
Ports 1x1
Application PoE
Tab Position DOWN
LED (Left-Right) YELLOW-GREEN
EMI Fingers No
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-POE-7499210123 |
Order Code 7499210123
Design THT
xBase-T 10/100 Base-T PoE
Ports 1x1
Application PoE
Tab Position VERTICAL
LED (Left-Right) YELLOW-GREEN
EMI Fingers No
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-POE-7499210124A |
Order Code 7499210124A
Design THT
xBase-T 10/100 Base-T PoE
Ports 1x1
Application PoE
Tab Position UP
LED (Left-Right) YELLOW-GREEN
EMI Fingers No
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-POE-7499211002A |
Order Code 7499211002A
Design THT
xBase-T 10/100 Base-T PoE
Ports 1x1
Application PoE
Tab Position DOWN
LED (Left-Right) NONE
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100BT-POE-7499211121A |
Order Code 7499211121A
Design THT
xBase-T 10/100 Base-T PoE
Ports 1x1
Application PoE
Tab Position DOWN
LED (Left-Right) YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100BT-POE-7499211122A |
Order Code 7499211122A
Design THT
xBase-T 10/100 Base-T PoE
Ports 1x1
Application PoE
Tab Position DOWN
LED (Left-Right) YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-10/100BT-SMD-7498011001A |
Order Code 7498011001A
Design SMD
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position Down
LED (Left-Right) None
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-SMD-7498011008 |
Order Code 7498011008
Design SMD
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position Down
LED (Left-Right) None
EMI Fingers Yes
|
|
Variants: |
|
|
| WE-RJ45-LAN-10/100BT-SMD-74980111211 |
Order Code 74980111211
Design SMD
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position Up
LED (Left-Right) YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-SMD-7498011122R |
Order Code 7498011122R
Design SMD
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position Up
LED (Left-Right) YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
|
 |
| WE-RJ45-LAN-10/100BT-SMD-7498011211 |
Order Code 7498011211
Design SMD
xBase-T 10/100 Base-T
Ports 1x1
Application Standard
Tab Position DOWN
LED (Left-Right) GREEN-YELLOW
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-100BT-POE+_7499410420 | WE-RJ45 LAN Transformer 2016(C) Würth Elektronik |
|
Variants: |
 |
 |
| WE-RJ45-LAN-100BT-POE_7499211125 | WE-RJ45 LAN Transformer Characteristics RJ45 Connector with integrated transformer/ common mode choke Available in SMD, THT and THT with USB 350µH min. OCL with 8mA bias Complies with IEEE 802.3 Extended temperature range -40°C to +85°C available PoE/ PoE+ Applications xDSL Modems Embedded PC LAN Applications Hub, Router, Switches |
|
Variants: |
 |
 |
| WE-RJ45-LAN-10G-BT-7499611421 |
Order Code 7499611421
Design THT
xBase-T 10G Base-T
Ports 1x1
Application Standard
Tab Position UP
LED (Left-Right) GREEN/YELLOW-GREEN
EMI Fingers Yes
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-HPLE-10/100-BT-74990111215A |
Order Code 74990111215A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application Standard HPLE
Tab Position Down
LED (Left-Right) YELLOW-GREEN
EMI Fingers YES
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-HPLE-10/100-BT-POE+--7499411122A |
Order Code 7499411122A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application PoE+ HPLE
Tab Position Up
LED (Left-Right) YELLOW-GREEN
EMI Fingers YES
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-HPLE-10/100-BT-POE-7499211123A |
Order Code 7499211123A
Design THT
xBase-T 10/100 Base-T
Ports 1x1
Application PoE HPLE
Tab Position Down
LED (Left-Right) YELLOW-GREEN
EMI Fingers YES
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-HPLE-10/100/1000-BT-POE+--7499511611A |
Order Code 7499511611A
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application PoE+ HPLE
Tab Position Up
LED (Left-Right) GREEN/ORANGE-YELLOW
EMI Fingers YES
|
|
Variants: |
 |
 |
| WE-RJ45-LAN-HPLE-10/100/1000-BT-POE-7499111614A |
Order Code 7499111614A
Design THT
xBase-T 10/100/1000 Base-T
Ports 1x1
Application Standard HPLE
Tab Position Up
LED (Left-Right) GREEN/ORANGE-YELLOW
EMI Fingers YES
|
|
Variants: |
 |
 |
| WE-SCC | SMD Common Mode Line Filter
Characteristics Enormous common mode impedance Z Small dimensions High current ratings Applications Attenuation of common mode noise Power supplies Data lines |
|
Variants: |
 |
  |
| WE-SD | Rod Core Choke
Characteristics Rated current up to 15 A Inductance is independent from rated DC current High mechanical stability High saturation currents Operating temperature: â40 ºC to +150 ºC Custom designs on request Applications Switching regulators Motors Power amplifiers Power supplies Broadband filtering Typical in VHF |
|
Variants: |
|
                      |
| WE-SECF | SMD EMI Contact Finger
Characteristics Material: Copper Beryllium (CuBe) gold-plated (AU) Corrosion resistant Wear resistant High temperatures and mechanical weight have no influence on the excellent connection properties Reliable solderability Tape & reel packaging Perfectly suited for automated placement Different types and sizes available Applications Contact between PCB's ground and housing Low impedance RF connection between PCBs and/or PCB and metal case |
|
Variants: |
|
                 |
| WE-SHC | Shielding Cabinet
Characteristics Tin plate in accordance with DIN EN 10202/10203 Shielding effectiveness up to 55 dB Two-part case consisting of a solderable grid frame (SMD/THT) and a removable cover Applications To prevent EMI radiation from PCB and to keep sensitivity low of: - RF output stages - RF input and amplifier stages; - Oscillators - EMC sensitive parts in plastic cases |
|
Variants: |
 |
          |
| WE-SI | Leaded Toroidal Storage Choke Characteristics Low magnetic stray field Low leakage and minimal noise because of the toroidal core made of iron powder Available for rated currents 0.5 A, 1 A, 3 A and 5 A Custom designs on request Applications Perfectly suitable for switching regulators from â Texas Instruments (LM) â Linear Technology (LT) â Maxim Used for example in switching power supplies and voltage transformers Switching regulators up to 100 kHz Details see: http://katalog.we-online.de/en/pbs/WE-SI/744101
Updated by Dan Xu 2014-06-10 |
|
Variants: |
|
                                  |
| WE-SL1 | SMD Common Mode Line Filter WE-SL1
- Small size Details see: http://katalog.we-online.de/en/pbs/WE-SL1?1
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-SL2 | SMD Common-Mode Line Filter WE-SL2
For distortion-free removal of noise from transmitted
electrical signals Details see: http://katalog.we-online.de/en/pbs/WE-SL2?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-SL3_744252XXX | SMD Common Mode Line Filter WE-SL3
- Small size
- USB Details see: http://katalog.we-online.de/en/pbs/WE-SL3?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-SL3_744253XXX | SMD Common Mode Line Filter WE-SL3
- Small size
- USB Details see: http://katalog.we-online.de/en/pbs/WE-SL3?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
 |
 |
| WE-SL3_HV | SMD Common Mode Line Filter WE-SL3 HV with 1.5 kV Isolation Voltage
- 1.5 kV isolation voltage |
|
Variants: |
|
 |
| WE-SL5 | SMD Common Mode Line Filter WE-SL5
- Small size Details see: http://katalog.we-online.de/en/pbs/WE-SL5?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-SL5_HC | SMD Common Mode WE-SL5
- Small size Details see: http://katalog.we-online.de/en/pbs/WE-SL5_HC?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-SLIM | Slim-Transformer WE-SLIM - total hight 12.0 mm max. - height 8.0 mm above PCB - output power 65W -- offline switch mode power supplies -- TV -- devices with heigh issues Details see: http://katalog.we-online.de/en/ctm/MID-SLIM?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
 |
 |
| WE-SLM | SMD Common Mode Line Filter WE-SLM
- Small size
-- USB Details see: http://katalog.we-online.de/en/pbs/WE-SLM??
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-SL_2WINDING | SMD Common-Mode Choke Line Filter WE-SL
For distortion-free removal of noise from transmitted
electrical signals Details see: http://katalog.we-online.de/en/pbs/WE-SL?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-SL_4WINDING | SMD Common-Mode Choke Line Filter WE-SL
For distortion-free removal of noise from transmitted
electrical signals Details see: http://katalog.we-online.de/en/pbs/WE-SL?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
 |
 |
| WE-SPC_48XX | SMD-Shielded Power Inductor WE-SPC
Details see: http://katalog.we-online.de/en/pbs/WE-SPC?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-SPEEDY_DESIGN_SERVICE_10PIN | WE-Speedy Design Service, 10 Pin - Any application that fits package style - Switch Mode Power: Flyback, Forward, Push-Pull, Coupled Inductor -- Telecom Applications: xDSL, POTS Splitter Inductors |
|
Variants: WE-SPEEDY_DESIGN_SERVICE_10PIN_EP13_SMD WE-SPEEDY_DESIGN_SERVICE_10PIN_EFD15_SMD WE-SPEEDY_DESIGN_SERVICE_10PIN_EFD20_SMD WE-SPEEDY_DESIGN_SERVICE_10PIN_EE16/7/4_THT WE-SPEEDY_DESIGN_SERVICE_10PIN_EE16/7/4_THT_VERTICAL WE-SPEEDY_DESIGN_SERVICE_10PIN_EE20/10/6_THT |
|
      |
| WE-SPEEDY_DESIGN_SERVICE_12PIN | WE-Speedy Design Service, 12 Pin - Any application that fits package style - Switch Mode Power: Flyback, Forward, Push-Pull, Coupled Inductor -- Telecom Applications: xDSL, POTS Splitter Inductors |
|
Variants: WE-SPEEDY_DESIGN_SERVICE_12PIN_ER11.5_SMD WE-SPEEDY_DESIGN_SERVICE_12PIN_ER14.5_SMD WE-SPEEDY_DESIGN_SERVICE_12PIN_EFD15_SMD WE-SPEEDY_DESIGN_SERVICE_12PIN_EFD20_SMD |
|
    |
| WE-SPEEDY_DESIGN_SERVICE_12PIN_EP13_SMD | WE-Speedy Design Service, 12 Pin - Any application that fits package style - Switch Mode Power: Flyback, Forward, Push-Pull, Coupled Inductor -- Telecom Applications: xDSL, POTS Splitter Inductors |
|
Variants: |
|
|
| WE-SPEEDY_DESIGN_SERVICE_13PIN | WE-Speedy Design Service, 13 Pin - Any application that fits package style - Switch Mode Power: Flyback, Forward, Push-Pull, Coupled Inductor -- Telecom Applications: xDSL, POTS Splitter Inductors |
|
Variants: |
 |
 |
| WE-SPEEDY_DESIGN_SERVICE_6PIN | WE-Speedy Design Service, 6 Pin - Any application that fits package style - Switch Mode Power: Flyback, Forward, Push-Pull, Coupled Inductor -- Telecom Applications: xDSL, POTS Splitter Inductors |
|
Variants: |
|
|
| WE-SPEEDY_DESIGN_SERVICE_8PIN | WE-Speedy Design Service, 8 Pin - Any application that fits package style - Switch Mode Power: Flyback, Forward, Push-Pull, Coupled Inductor -- Telecom Applications: xDSL, POTS Splitter Inductors |
|
Variants: WE-SPEEDY_DESIGN_SERVICE_8PIN_EP7_SMD WE-SPEEDY_DESIGN_SERVICE_8PIN_EPX7_SMD WE-SPEEDY_DESIGN_SERVICE_8PIN_EP10_SMD WE-SPEEDY_DESIGN_SERVICE_8PIN_EPX9_SMD WE-SPEEDY_DESIGN_SERVICE_8PIN_ER9.5_SMD WE-SPEEDY_DESIGN_SERVICE_8PIN_EE13/5/6_THT WE-SPEEDY_DESIGN_SERVICE_8PIN_EE13/7/5_THT |
|
      |
| WE-SPEEDY_DESIGN_SERVICE_9PIN | WE-Speedy Design Service, 9 Pin - Any application that fits package style - Switch Mode Power: Flyback, Forward, Push-Pull, Coupled Inductor -- Telecom Applications: xDSL, POTS Splitter Inductors |
|
Variants: |
 |
  |
| WE-SPEED_DESIGN_SERVICE_14PIN | WE-Speedy Design Service, 14 Pin - Any application that fits package style - Switch Mode Power: Flyback, Forward, Push-Pull, Coupled Inductor -- Telecom Applications: xDSL, POTS Splitter Inductors |
|
Variants: |
 |
 |
| WE-SUKW | SMD EMI Suppression 5-Hole Ferrite Bead
Characteristics Impedance up to 580 Ω SMD version for an easy installation on the PCB Special NiSn pad for improved soldering results Operating temperature: â40 ºC to +125 ºC Applications Protection against radio frequency interferences of components on PCBâs of PCâs, text processing and other digital devices Typical in power supply Power electronics Details see: http://katalog.we-online.de/en/pbs/WE-SUKW?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
  |
| WE-TCI | Thinfilm Chip Inductor
Characteristics High self resonant frequency Tight tolerances of 2% (1% on request) or ± 0.1 nH and small inductance values Outstanding temperature stability In high frequency circuit the inductance is very stable Small inductance values Operating temperature: â40 ºC to +125 ºC Applications Mobile phone Pagers GPS products Wireless LAN Communication appliances RF Transceiver Module Details see: http://katalog.we-online.de/en/pbs/WE-TCI?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
   |
| WE-TDC | SEPIC SMD Coupled Inductor
Characteristics Core material: NiZn Low profile Magnetical shielded which results in a low leakage field 8x8 mm case 1:1 transformer Low self-losses High self resonance frequency Coupled inductor with two identical windings Operating temperature: â40 °C up to +125 °C Applications Non-isolated flyback converter Buck or Boost with AUX winding BUCK-BOOST, SEPIC, ZETA & CUK Converter Switching regulators with secondary unregulated output voltages Details see: http://katalog.we-online.de/en/pbs/WE-TDC?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-TFC | Common Mode Power Line Choke
Characteristics Approximate 1% stray inductance for symmetrical interference suppression Operating temperature: â40 °C to +125 °C Applications Mains filter Suppression of common mode noise Compact switch mode power supplies Electronic ballast applications (LED bulb) Lighting White goods Details see: http://katalog.we-online.de/en/pbs/WE-TFC?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-TFCH | Common Mode Power Line Choke
Characteristics Approximate 1% stray inductance for symmetrical interference suppression Optimized frequency range: 10 kHz to 100 MHz Attenuation up to 65 dB Inductance tolerance: +50%/â30% Operating temperature: â40 °C to +125 °C Applications Mains filter Suppression of common mode noise Compact switch mode power supplies Electronic ballast applications (LED bulb) Lighting White goods Details see: http://katalog.we-online.de/en/pbs/WE-TFCH?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-TI | Radial Leaded Wire Wound Inductor
Characteristics Radial through-hole inductor High saturation core material Small size Maximum current up to 8.5 A Custom design on request Applications Signal filtering Switches, switching power supply for small and medium voltage Power supply filter EMI filter Details see: http://katalog.we-online.de/en/pbs/WE-TI?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
          |
| WE-TIF | WE-TIF Radial Leaded Wire Wound Inductor with 4 Pins Characteristics Radial through-hole inductor High saturation core material Maximum current up to 3.1 A 2 additional pins for high mechanical stability Application Signal filtering EMI and power supply filter DC/DC converters Switching power Supplies for small and medium voltage Power supply for LED Nearfield applications Details see: http://katalog.we-online.de/en/pbs/WE-TIF
Updated on 2015-05-21 |
|
Variants: |
|
  |
| WE-TIS | Shielded Radial Leaded Wire Wound Inductor
Characteristics Shielded radial through-hole inductor High rated and saturation current High inductance values Low stray field Applications Filter choke Storage choke Class D amplifiers Details see: http://katalog.we-online.de/en/pbs/WE-TIS?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
  |
| WE-TI_HV | Radial Leaded Wire Wound Inductor
Characteristics Radial through-hole inductor High saturation core material Unshielded construction Designed for 400 VDC Applications Non-isolated buck or buck-boost converter like Power Integrations LinkSwitch-TN Constant current LED driver Utility metering Filter for power supply Details see: http://katalog.we-online.de/en/pbs/WE-TI_HV?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
|
| WE-TMSB | Tiny Multilayer Suppression Bead
Characteristics Perfect for Miniaturization of EMI solutions Wide Impedance range from 10 up to 300 Ω Operating Temperature: â55 °C to +125 °C Applications General signal and low power lines Audio-, video-, clocklines Small handheld Details see: http://katalog.we-online.de/en/pbs/WE-TMSB?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
 |
| WE-TPC | SMD Shielded Tiny Power Inductor
Characteristics Extremely flat power inductor High current capability Magnetically shielded which results in a low leakage field Operating temperature: â40 °C to +125 °C Applications Portable power like PDA, digital camera, PCMCIA cards and displays DC/DC converter Embedded PC Mobile data gathering, telemetric Details see: http://katalog.we-online.de/en/pbs/WE-TPC?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
|
          |
| WE-TVSP_BI | WE-TVSP Power TVS Diode
Details see: http://katalog.we-online.de/en/pbs/WE-TVSP/824500101 2015 (C) Würth Elektronik |
|
Variants: |
 |
   |
| WE-TVSP_UNI | WE-TVSP Power TVS Diode
Details see: http://katalog.we-online.de/en/pbs/WE-TVSP/824500101 2015 (C) Würth Elektronik |
|
Variants: |
 |
   |
| WE-TVS_824001 | TVS Diode High Speed Series
Characteristics Low clamping voltage Sturdy design Very low capacitance Flow Thru Design for a simple layout Rail to Rail protection Epoxy flame resistant UL94 V-0 RoHS, REACH and free of halogens Applications Very fast data lines USB 2.0 Ethernet PoE VGA Sim Cards Keypads ESD protection in accordance with EN 61000-4-2, â 8 kV contact discharge â 15 kV air discharge Details see: http://katalog.we-online.de/en/pbs/WE-TVS_High_Speed/824001?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
 |
 |
| WE-TVS_82400102 | TVS Diode High Speed Series
Characteristics Low clamping voltage Sturdy design Very low capacitance Flow Thru Design for a simple layout Rail to Rail protection Epoxy flame resistant UL94 V-0 RoHS, REACH and free of halogens Applications Very fast data lines USB 2.0 Ethernet PoE VGA Sim Cards Keypads ESD protection in accordance with EN 61000-4-2, â 8 kV contact discharge â 15 kV air discharge Details see: http://katalog.we-online.de/en/pbs/WE-TVS_High_Speed/824001?
Updated by Dan Xu 2014-07-11 |
|
Variants: |
 |
|
| WE-TVS_82400152 | TVS Diode High Speed Series
Characteristics Low clamping voltage Sturdy design Very low capacitance Flow Thru Design for a simple layout Rail to Rail protection Epoxy flame resistant UL94 V-0 RoHS, REACH and free of halogens Applications Very fast data lines USB 2.0 Ethernet PoE VGA Sim Cards Keypads ESD protection in accordance with EN 61000-4-2, â 8 kV contact discharge â 15 kV air discharge Details see: http://katalog.we-online.de/en/pbs/WE-TVS_High_Speed/824001? Updated by Dan Xu 2014-07-11 | |
