Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
News
2017-07-02
DIY Modules Eagle Library version 1.8.0 has been released.
2017-05-20
DIY Modules Eagle Library version 1.7.0 has been released.
2017-05-03
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
Top searches:
ARDUINO NANO POTENTIOMETER 7805 ATMEGA LM2596 BATTERY ARDUINO OLED SWITCH ESP8266 MOSFET 7 SEGMENT TERMINAL BLOCK SD CARD RELAY AMS1117 CONNECTOR 1N4007 LCD TRANSFORMER ATMEGA328P POLOLU MOTOR JST 433 MHZ
Ohter interesting searches:
TEXAS HIROSE TO252 VISHAY ATMEGA328 DIODE 18650 ARDUINO UNO TRANSISTOR 7404 BME280 SIM900 IRF ALPS USB 40106 ARDUINO MEGA FUSE DISPLAY TL431 DISPLAY ANTENNA 400 CAPACITOR USB TYPE C MICROCHIP
- Home
- World of EAGLE Libraries
- Library Structure
EAGLE Library Structure
File details
| File name: | Audio-Power-amlifier V.2.0.lbr |
| Uploaded by: | hazet |
| Remarks: | This library is a part of the archive file audio-power-amlifier_v.2.0.rar Show other files in the archive |
| Download options: | Download whole archive from DIYmodules.org ( 171.4 KiB )Download original file from DIYmodules.org ( 1,829.2 KiB )Download file converted to the latest EAGLE format ( 1,829.2 KiB ) |
Library description
This file has no description inside.
Below description of the library from CadSoft webpage:
Are you looking for a library, and it's not here? For sure, you'll find it on: http://www.elektroda.pl/rtvforum/topic625711-0.html
List of devices
| Name & variants | Symbol | Package |
|---|---|---|
| AD1990/2/4 | Manufactured after 2006. The AD199x is a two channel Bridge Tied Load (BTL) switching audio power amplifier with integrated ΣΠmodulator. The modulator accepts a 1Vrms input signal (maximum power) and generates a switching waveform to drive speakers directly. One of the two modulators can control both output stages providing twice the current for single-channel applications. A digital, microcontroller-compatible interface provides control of reset, mute and PGA gain as well as output signals for thermal and over-current error conditions. The output stage can operate from supply voltages ranging from 8V to 20V. The analog modulator and digital logic operate from a 5V supply. |
|
Variants: |
 |
 |
| AN12941A | Audio power IC for notebook PC | |
Variants: |
 |
 |
| AN5270 | 4.3 W ´ 1(8W) Power Amplifier with Volume Control and Tone Control | |
Variants: |
 |
 |
| AN5273 | The AN5273 is a monolithic integrated circuit designed for 4.0 W (18 V, 8 W) output audio power amplifier. It is a dual channel SEPP IC suitable for stereo operation in TV application. | |
Variants: |
 |
 |
| AN5274 | The AN5274 is a monolithic integrated circuit designed for 4.0 W (18 V, 8 W) output audio power amplifier. It is a dual channel SEPP IC suitable for stereo operation in TV application. | |
Variants: |
 |
 |
| AN5278 | The AN5278 is a monolithic integrated circuit designed for 4.8 W ´ 1 channel OTL (18 V, 8 W) output audio power amplifier suitable for TV application. | |
Variants: |
 |
|
| AN7106K | Single Chip Stereo Pre-amplifier/ Power Amplifier | |
Variants: |
 |
 |
| AN7108 | 1-CHIP STEREO PRE-AMPLIFIER/POWER AMPLIFIER CIRCUIT 3V | |
Variants: |
 |
 |
| AN7110 | 1,2W AUDIO POWER AMPLIFIER | |
Variants: |
 |
|
| AN7112 | 0,5 W AUDIO POWER AMPLIFIER | |
Variants: |
 |
|
| AN7118S | Low Voltage Dual 35mW Audio Power Amplifier Circuits (BTL 300mW) | |
Variants: |
 |
 |
| AN7134NR | Dual 7,5W Audio Power Ampliefier | |
Variants: |
 |
 |
| AN7142 | 0,9W DUAL AUDIO POWER AMPLIFIER | |
Variants: |
 |
|
| AN7147N | The AN7147N is an integrated circuit designed for power amplifier of 5.3W (12.0V, 3½) output. Stereo operation is enabled due to incorporating two amps. on one chip. It makes high reliability by smaller quiescent current compared with power amp. current and protectors built in. As quiescent circuit current is very small, it is most suitably used for battery operated set such as radio cassette recorder. Furthermore, low distortion and low noise are realized and external components are very few. 12-pin SIL package enabled compact and high integrated set | |
Variants: |
 |
|
| AN7164 | The AN7164 is an integrated circuit designed for 30 W (VCC = 21 V, 8 W) output power amplifier. High power output (BTL 30 W), low distortion and low noise are realized. High reliability is obtained due to various kinds of protectors built in. Furthermore, on-off of output is possible from standby terminal. | |
Variants: |
 |
|
| AN7194K/Z | The AN7194K and AN7194Z are single power supply, BTL, audio class-H power amplifier ICs. A class-H power amplifier can be made up when this ICs are used in combination with the AN7077Z which is separately market- available, and it is possible to make a low consumption power system. Also, the AN7194K and AN7194Z are incorporating various protection circuits, so that those ICs contribute to the high reliability design of set. | |
Variants: |
 |
  |
| AN7195K | The AN7195K is an audio power IC developed for the sound output of car audio (dual 15 W). It is incorporating various protection circuits to protect the IC from destruction by GND-open short-circuit to GND and power supply surge which are the most important subjects of power IC protection, and the IC will largely | |
Variants: |
 |
|
| AN7195Z | The AN7195Z is an audio power IC developed for the sound output of car audio (dual 15 W). It is incorporating various protection circuits to protect the IC from destruction by GND-open short-circuit to GND and power supply surge which are the most important subjects of power IC protection, and the IC will largely contribute to a high reliability design of equipment. | |
Variants: |
 |
|
| AS1701/06 | The AS1701 and AS1706 are 1.6W bridged audio power amplifiers that provide excellent circuit reliability, providing a very low-cost solution by eliminating external components when used with 2.7 to 5.5Vpowered circuits. | |
Variants: |
 |
 |
| BA3528/9AFP | Pre / power amplifier and motor governor for 3V headphone stereos | |
Variants: |
 |
 |
| BA5204F | 3V / 35mW dual power amplifier | |
Variants: |
 |
 |
| BA5208AF | 3V-400mW BTL Power Audio Amplifier | |
Variants: |
 |
|
| BA5210FS | Speaker / headphone switch power amplifier | |
Variants: |
 |
 |
| BA5417 | High-output dual power amplifier | |
Variants: |
 |
 |
| CXA1622M/P | SONY Stereo Power Amplifier/Monaural BTL Power Amplifier | |
Variants: |
 |
|
| KA2102A | http://www.datasheetcatalog.org/datasheet/SamsungElectronic/mXuztvq.pdf | |
Variants: |
 |
 |
| KA2206BN | ||
Variants: |
 |
 |
| KIA6280H | 22W BTL AUDIO POWER AMPLIFIER. | |
Variants: |
 |
 |
| L165 | 3A POWER OPERATIONAL AMPLIFIER | |
Variants: |
 |
 |
| LA4182 | Built-in 2 channels enabling use in stereo and bridge amplifier applications. High output: 2.3 W/channel, VCC=9V,RL=4â¦, and 4.7 W/bridge, RL=8â¦. Minimum number of external parts required : 9 pcs. min. (Stereo/bridge). Small pop noise at the time of power supply ON/OFF due to built-in muting circuit. Good ripple rejection ratio due to built-in ripple filter. Soft tone at the time of output saturation. Good channel separation. Voltage gain fixed at 45 dB (Bridge: 51 dB). Variable voltage gain available with external resistor added. Easy to design radiator fin. | |
Variants: |
 |
|
| LA4268 | The LA4268 is a SANYO 10 W power amplifier intended for televisions. This IC has a series of pin compatible monaural and 2- channel power amplifiers, thus allows the end product to use a common circuit boad. | |
Variants: |
 |
 |
| LA4485 | The LA4485 is a 5 W, two-channel power amplifier IC that requires a minimum of external parts, making it ideal for radio cassette players and car stereo equipment. The LA4485 eliminates the need for bootstrap capacitors, negative feedback capacitors, and oscillation prevention CR parts, all of which were necessities for power ICs previously. All of these functions are now on chip, keeping the number of external parts to an absolute minimum. The LA4485 is part of the Power (Stylish Power) Series, and supports two modes: dual and BTL. | |
Variants: |
 |
 |
| LA4814JA | The LA4814JA buili-in the power amplifier circuit capable of low-voltage (2.7V and up) operation and has additionally a standby function to reduce the current drain. It is a power amplifier IC optimal for speaker drive used in battery-driven portable equipment and other such products. | |
Variants: |
 |
 |
| LM1875 | The LM1875 is a monolithic power amplifier offering very low distortion and high quality performance for consumer audio applications. The LM1875 delivers 20 watts into a 4Ω or 8Ω load on ±25V supplies. Using an 8Ω load and ±30V supplies, over 30 watts of power may be delivered. The amplifier is designed to operate with a minimum of external components. Device overload protection consists of both internal current limit and thermal shutdown. The LM1875 design takes advantage of advanced circuit techniques and processing to achieve extremely low distortion levels even at high output power levels. Other outstanding features include high gain, fast slew rate and a wide power bandwidth, large output voltage swing, high current capability, and a very wide supply range. The amplifier is internally compensated and stable for gains of 10 or greater. | |
Variants: |
 |
 |
| LM1876 | The LM1876 is a stereo audio amplifier capable of delivering typically 20W per channel of continuous average output power into a 4Ω or 8Ω load with less than 0.1% THD+N. Each amplifier has an independent smooth transition fade-in/out mute and a power conserving standby mode which can be controlled by external logic. | |
Variants: |
 |
 |
| LM2876 | LM2876 Overture⢠Audio Power Amplifier Series High-Performance 40W Audio Power Amplifier w/Mute | |
Variants: |
 |
 |
| LM2878 | The LM2878 is a high voltage stereo power amplifier designed to deliver 5W/channel continuous into 8X loads. The amplifier is ideal for use with low regulation power supplies due to the absolute maximum rating of 35V and its superior power supply rejection. | |
Variants: |
 |
 |
| LM386?-* | Low Voltage Audio Power Amplifier Source: http://cache.national.com/ds/LM/LM386.pdf |
|
Variants: |
 |
    |
| LM3875 | The LM3875 is a high-performance audio power amplifier capable of delivering 56W of continuous average power to an 8Ω load with 0.1% THD+N from 20Hz to 20kHz. | |
Variants: |
|
|
| LM3876 | Audio Power Amplifier Series High-Performance 56W Audio Power Amplifier w/Mute | |
Variants: |
 |
 |
| LM3886 | LM3886 Overture⢠Audio Power Amplifier Series High-Performance 68W Audio Power Amplifier w/Mute | |
Variants: |
 |
|
| LM4667 | LM4667 Filterless High Efficiency 1.3W Switching Audio Amplifier | |
Variants: |
 |
  |
| LM4702 | The LM4702 is a high fidelity audio power amplifier driver designed for demanding consumer and pro-audio applications. Amplifier output power may be scaled by changing the supply voltage and number of output devices. The LM4702 is capable of delivering in excess of 300 watts per channel single ended into an 8 ohm load in the presence of 10% high line headroom and 20% supply regulation. The LM4702 includes thermal shut down circuitry that activates when the die temperature exceeds 150°C. The LM4702's mute function, when activated, mutes the input drive signal and forces the amplifier output to a quiescent state. | |
Variants: |
 |
|
| LM4731 | LM4731 Stereo 25W Audio Power Amplifier with Mute and Standby Modes | |
Variants: |
 |
|
| LM4732 | The LM4732 is a stereo audio amplifier capable of typically delivering 50W per channel of continuous average output power into a 4Ω or 8Ω load with less than 10% THD+N from 20Hz - 20kHz | |
Variants: |
 |
 |
| LM4733 | 3 Channel 30W Audio Power Amplifier with Mute | |
Variants: |
 |
|
| LM4753 | The LM4753 is a stereo audio amplifier capable of delivering 10W/channel at 10% distortion into a 8W load. The power amp has an internally set gain of 30 dB. A 0Vâ5V DC controlled volume block provides 80 dB of attenuation from input to line-out. Line outputs are available after the volume control for signal routing. | |
Variants: |
 |
 |
| LM4766 | LM4766 Overture⢠Audio Power Amplifier Series Dual 40W Audio Power Amplifier with Mute | |
Variants: |
 |
  |
| LM4780 | The LM4780 is an stereo audio amplifier capable of typically delivering 60W per channel of continuous average output power into an 8Ω load with less than 0.5% THD+N from 20Hz - 20kHz. The LM4780 is fully protected utilizing National's Self Peak Instantaneous Temperature (°Ke) (SPiKeTM) protection circuitry. SPiKe provides a dynamically optimized Safe Operating Area (SOA). SPiKe protection completely safeguards the LM4780's outputs against over-voltage, under-voltage, overloads, shorts to the supplies or GND, thermal runaway and instantaneous temperature peaks. The advanced protection features of the LM4780 places it in a class above discrete and hybrid amplifiers. Each amplifier of the LM4780 has an independent smooth transition fade-in/out mute. The LM4780 can easily be configured for bridge or parallel operation for 120W mono solutions. | |
Variants: |
 |
 |
| LM4871 | The LM4871 is a mono bridged audio power amplifier capable of delivering 3W of continuous average power into a 3Ω load with less than 10% THD when powered by a 5V power supply (see Note). To conserve power in portable applications, the LM4871's micropower shutdown mode (IQ = 0.6μA, typ) is activated when VDD is applied to the SHUTDOWN pin. Boomer audio power amplifiers are designed specifically to provide high power, high fidelity audio output. They require few external components and operate on low supply voltages from 2.0V to 5.5V. Since the LM4871 does not require output coupling capacitors, bootstrap capacitors, or snubber networks, it is ideally suited for lowpower portable systems that require minimum volume and weight. | |
Variants: |
 |
   |
| LM4916 | LM4916 1.5V, Mono 85mW BTL Output, 14mW Stereo Headphone Audio Amplifier | |
Variants: |
 |
  |
| LM4921 | LM4921 Low Voltage I2S 16-Bit Stereo DAC with Stereo Headphone Power Amplifiers and Volume Control | |
Variants: |
 |
 |
| LM4931 | LM4931 Boomer⢠Audio Power Amplifier Series Audio Subsystem with Mono High Efficiency Loudspeaker and Stereo Headphone Amplifiers | |
Variants: |
 |
 |
| LM4950 | LM4950 Boomer ⢠Audio Power Amplifier Series 7.5W Mono-BTL or 3.1W Stereo Audio Power Amplifier | |
Variants: |
 |
  |
| LM4990LD/MH/ITLX | The LM4990 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1.25 watts of continuous average power to an 8Ω BTL load and 2 watts of continuous average power (LD and MH only) to a 4Ω BTL load with less than 1% distortion (THD+N+N) from a 5VDC power supply. | |
Variants: |
 |
  |
| LM4990MM | LM4990 2 Watt Audio Power Amplifier with Selectable Shutdown Logic Level | |
Variants: |
 |
|
| LM4991 | The LM4991 is a mono bridged audio power amplifier capable of delivering 3W of continuous average power into a 3Ω load with less than 10% THD when powered by a 5V power supply (see Note below). To conserve power in portable applications, the LM4991's micropower shutdown mode (ISD = 0.1μA, typ) is activated when VDD is applied to the SHUTDOWN pin. | |
Variants: |
|
|
| LME49810 | LME49810 200V Audio Power Amplifier Driver with Baker Clamp. The LME49810 is a high fidelity audio power amplifier driver designed for demanding consumer and pro-audio applications. Amplifier output power may be scaled by changing the supply voltage and number of power transistors. The LME49810âs minimum output current is 50mA. When using a discrete output stage the LME49810 is capable of delivering in excess of 300 watts into a single-ended 8Ω load. |
|
Variants: |
 |
 |
| LME49830 | The LME49830 is a high fidelity audio power amplifier input stage designed for demanding consumer and proaudio applications. Amplifier output power may be scaled by changing the supply voltage and number of output devices. The LME49830 is capable of driving an output stage in excess of 300 W single-ended into an 8Ω load in the presence of 10% high line headroom and 20% supply regulation. The LME49830 includes internal thermal shut down circuitry that activates when the LME49830 die temperature exceeds 150°C. The LME49830 has a mute function that mutes the input drive signal and forces the amplifier output to a quiescent state. The LME49830 has high drive current, 56mA typical, and high output voltage swing for maximum flexibility in output stage choice. With a bias voltage range up to 16V the LME49830 can be used to drive MOSFET output stages using a wide selection of MOSFETs. | |
Variants: |
 |
|
| LV47022P | SANYO 4 x48W - Chanel BTL Power Amplifier | |
Variants: |
 |
 |
| LV4904V | SANYO-15W + 15W AUDIO POWER AMPLIFIER | |
Variants: |
 |
 |
| LX1720 | The LX1720 is a highly-integrated, Switching Class-D Stereo Power Amplifier Controller IC with power and size features that make it ideal for multimedia computer applications, as well as other applications where high fidelity sound is required. With input voltage ranging from 7V- 15V, the LX1720 is designed to operate over the full 20Hz to 20kHz audio range. Signal distortion measurements using industry standard 1kHz signal yields THD + noise levels < 1% (10 watts output). | |
Variants: |
 |
 |
| M5218AL/P/FP | Dual power ampliefier | |
Variants: |
 |
  |
| M61571AFP | M61571AFP is a Digital power amplifier IC developed for home audio. M61571AFP can realize maximum Power 50W à 2ch(VD = 21V,THD = 10%, BTL) at 4 Ω load. It is possible to replace from the conventional analog amplifier system to the digital amplifier system easily. Refer to "http://www.renesas.com/en/network" for the latest and detailed information. | |
Variants: |
 |
 |
| MAX9703 | The MAX9703 mono class D audio power amplifiers provide class AB amplifier performance with class D efficiency, conserving board space and eliminating the need for a bulky heatsink. Using a class D architecture, these devices deliver up to 15W while offering up to 78% efficiency. Proprietary and patent-protected modulation and switching schemes render the traditional class D output filter unnecessary. | |
Variants: |
  |
 |
| MAX9704 | The MAX9704 stereo class D audio power amplifiers provide class AB amplifier performance with class D efficiency, conserving board space and eliminating the need for a bulky heatsink. Using a class D architecture, these devices deliver up to 15W while offering up to 78% efficiency. Proprietary and patent-protected modulation and switching schemes render the traditional class D output filter unnecessary. | |
Variants: |
 |
 |
| MAX9708ECB | The MAX9708 mono/stereo, Class D audio power amplifier delivers up to 2 x 21W into an 8Ω stereo mode and 1 x 42W into a 4Ω load in mono mode while offering up to 87% efficiency. The MAX9708 provides Class AB amplifier performance with the benefits of Class D efficiency, eliminating the need for a bulky heatsink and conserving power. The MAX9708 operates from a single +10V to +18V supply, driving the load in a BTL configuration. The MAX9708 | |
Variants: |
 |
 |
| MAX9708ETN | The MAX9708 mono/stereo, Class D audio power amplifier delivers up to 2 x 21W into an 8Ω stereo mode and 1 x 42W into a 4Ω load in mono mode while offering up to 87% efficiency. The MAX9708 provides Class AB amplifier performance with the benefits of Class D efficiency, eliminating the need for a bulky heatsink and conserving power. The MAX9708 operates from a single +10V to +18V supply, driving the load in a BTL configuration. The MAX9708 | |
Variants: |
 |
 |
| MAX9713 | The MAX9713 mono/stereo Class D audio power amplifiers provide Class AB amplifier performance with Class D efficiency, conserving board space and eliminating the need for a bulky heatsink. Using a Class D architecture, these devices deliver up to 6W while offering greater than 85% efficiency. Proprietary and protected modulation and switching schemes render the traditional Class D output filter unnecessary. | |
Variants: |
 |
|
| MAX9714 | The MAX9714 mono/stereo Class D audio power amplifiers provide Class AB amplifier performance with Class D efficiency, conserving board space and eliminating the need for a bulky heatsink. Using a Class D architecture, these devices deliver up to 6W while offering greater than 85% efficiency. Proprietary and protected modulation and switching schemes render the traditional Class D output filter unnecessary. | |
Variants: |
 |
|
| MAX9750 | The MAX9750 combine a stereo, 2.6W audio power amplifier and stereo DirectDrive® 110mW headphone amplifier in a single device. The headphone amplifier uses Maximâs DirectDrive architecture that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space, and component height. A high 90dB PSRR and low 0.01% THD+N ensures clean, low-distortion amplification of the audio signal. | |
Variants: |
 |
 |
| MAX9751 | The MAX9751 combine a stereo, 2.6W audio power amplifier and stereo DirectDrive® 110mW headphone amplifier in a single device. The headphone amplifier uses Maximâs DirectDrive architecture that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space, and component height. A high 90dB PSRR and low 0.01% THD+N ensures clean, low-distortion amplification of the audio signal. | |
Variants: |
 |
|
| MAX9755 | The MAX9755 combine a stereo, 2.6W audio power amplifier and stereo DirectDrive® 110mW headphone amplifier in a single device. The headphone amplifier uses Maximâs DirectDrive architecture that produces a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, space, and component height. A high 90dB PSRR and low 0.01% THD+N ensures clean, low-distortion amplification of the audio signal. | |
Variants: |
 |
|
| MAX98356 | The MAX98356 is a digital pulse-density modulated (PDM) input Class D power amplifier that provides Class AB audio performance with Class D efficiency. This IC offers five selectable gain settings (3dB, 6dB, 9dB, 12dB, and 15dB) set by a single gain-select input (GAIN). | |
Variants: |
 |
 |
| MB3730A | FUJITSU - 1,4 BTL AUDIO POWER AMPLIEFIER | |
Variants: |
 |
 |
| MC34119 | The MC34119 is a MOTOROLA low power audio amplifier intergrated circuit intended (primarily) for telephone applications, such as in speakerphones. It provides differential speaker outputs to maximize output swing at low supply voltages (2.0 V minimum). Coupling capacitors to the speaker are not required. Open loop gain is 80 dB, and the closed loop gain is set with two external resistors. A Chip Disable pin permits powering down and/or muting the input signal. | |
Variants: |
 |
  |
| NTE1367 | Dual, Audio Power Amp, 2.3W to 5W (4.6W to 15W BTL) | |
Variants: |
 |
 |
| NTE1898 | Dual Audio Power Amp, 5.8W (22W BTL) | |
Variants: |
 |
|
| PA3011 | UNISONIC TECHNOLOGIES As a stereo audio speaker which is operating on a single 5.5V supply, the UTC PA3011 is capable of delivering 3W of output power per channel into 3Ω loads with less than 10% THD+N. The speaker volume level is adjusted by applying a dc voltage to the VOLUME terminal. When a dc voltage is applied, to avoid an unexpected high volume level through the headphones, a third terminal, SEMAX, limits the headphone volume level. And also a fade mode ramps the volume up and down to ensure a smooth transition between active and shutdown modes,. The UTC PA3011 can be applicatated in notebook, LCD monitors and pocket PC. | |
Variants: |
 |
 |
| PA6021 | The PA6021 is a stereo audio power amplifier that drives 2 W/channel of continuous RMS power into a 4-Ω load when utilizing a heat sink. Advanced dc volume control minimizes external components and allows BTL (speaker) volume control and SE (headphone) volume control. | |
Variants: |
 |
 |
| SA58631 | The SA58631 is a one channel audio amplifier in an HVSON8 package. It provides power output of 3 W with an 8 W load at 9 V supply. The internal circuit is comprised of a BTL (Bridge Tied Load) amplifier with a complementary PNP-NPN output stage and standby/mute logic. The SA58631 is housed in an 8-pin HVSON package which has an exposed die attach paddle enabling reduced thermal resistance and increased power dissipation. | |
Variants: |
 |
 |
| SA58632 | The SA58632 is a two-channel audio amplifier in an HVQFN20 package. It provides power output of 2.2 W per channel with an 8 Ω load at 9 V supply. The internal circuit is comprised of two BTL (Bridge-Tied Load) amplifiers with a complementary PNP-NPN output stage and standby/mute logic. The SA58632 is housed in a 20-pin HVQFN package, which has an exposed die attach paddle enabling reduced thermal resistance and increased power dissipation | |
Variants: |
 |
 |
| SA58637 | The SA58637 is a two-channel audio amplifier in an HVQFN20 package. It provides power output of 2.2 W per channel with an 8 W load at 9 V supply. The internal circuit is comprised of two Bridge-Tied Load (BTL) amplifiers with a complementary PNP-NPN output stage and standby/mute logic. The SA58637 is housed in a 20-pin HVQFN package, which has an exposed die attach paddle enabling reduced thermal resistance and increased power dissipation. | |
Variants: |
 |
|
| SI8241/8244 | The Si824x isolated driver family combines two isolated drivers in a single package. The Si8241/44 are high-side/low-side drivers specifically targeted at high-power (>30 W) audio applications. Versions with peak output currents of 0.5 A (Si8241) and 4.0 A (Si8244) are available. All drivers operate with a maximum supply voltage of 24 V. | |
Variants: |
 |
 |
| STA/TDA-7360 | 20W BRIDGE/STEREO AUDIO AMPLIFIER WITH CLIPPING DETECTOR | |
Variants: |
 |
  |
| STA335BW | The STA335BW is an integration of digital audio processing, digital amplifier control and DDX® power-output stage to create a high-power single-chip DDX solution comprising high-quality, high-efficiency and all digital amplification. The STA335BW is part of the Sound Terminal⢠family that provides full digital audio streaming to the speaker offering cost effectiveness, low energy dissipation and sound enrichment. The STA335BW power section consists of four independent half-bridges. These can be configured via digital control to operate in different modes. 2.1 channels can be provided by two half-bridges and a single full-bridge, providing up to 2 x 9 W + 1 x 20 W of power output. Two channels can be provided by two full-bridges, providing up to 2 x 37 W of power. The IC can also be configured as 2.1 channels with 2 x 30 W provided by the device and external power for DDX® power drive. | |
Variants: |
 |
 |
| STA500 | STA500 is 30V 3.5A QUAD POWER HALF BRIDGE a monolithic quad half bridge stage in Multipower BCD Technology. The device can be used as dual bridge or reconfigured, by connecting CONFIG pin to Vdd pin, as single bridge with double current capability. | |
Variants: |
 |
 |
| STA5100 | The STA5100 is a fully integrated power module designed to implement a BASH® amplifier when used in conjunction with STABP01 digital processor. | |
Variants: |
 |
 |
| STA5150 | 200W MONO POWER AMPLIFIER. The STA5150 is a fully integrated power module designed to implement a BASH® amplifier when used in conjunction with STABP01 digital processor. |
|
Variants: |
|
|
| STA540SA | 4 x 10W DUAL/QUAD POWER AMPLIFIER | |
Variants: |
 |
 |
| STA550/575 | STA575 100+100W STEREO POWER AMPLIFIER STA550 70+70W STEREO POWER AMPLIFIER | |
Variants: |
 |
|
| STK4241/2 | ||
Variants: |
 |
 |
| STK428-430 | SANYO CLASS-D AUDIO 2x150W POWER AMPLIFIERS | |
Variants: |
 |
 |
| TA0105A | STEREO CLASS-T DIGITAL AUDIO AMPLIFIER DRIVER USING DIGITAL POWER PROCESSING (DPPTM ) TECHNOLOGY | |
Variants: |
 |
 |
| TA2022 | STEREO 90W (4.) CLASS-TM DIGITAL AUDIO AMPLIFIER DRIVER
USING DIGITAL POWER PROCESSING (DPP TM) TECHNOLOGY |
|
Variants: |
 |
 |
| TA2024 | The TA2 0 2 4 i s a 1 5 W / c h c o n t i n u o u s a v e r a g e t wo - c h a n n e l C l a s s - T D i g i t a l A u d i o Power A m p l i f i e r I C u s i n g T r i p a t h â s p r o p r i e t a r y D i g i t a l P o wer P r o c e s s i n g ⢠t e c h n o l o g y. C l a s s - T a m p l i f i e r s o f f e r b o t h t h e a u d i o f i d e l i t y o f C l a s s - A B a n d t h e powe r e f f i c i e n c y o f C l a s s - D a m p l i f i e r s . | |
Variants: |
 |
 |
| TA7250/51BP | 30W BTL Audio Power Amplifier of Toshiba Bipolar Linear. | |
Variants: |
 |
|
| TA7280P | Toshiba 5,8 DUAL AUDIO POWER AMPLIEFIER | |
Variants: |
 |
|
| TA7281P | Toshiba 5,8 DUAL AUDIO POWER AMPLIEFIER | |
Variants: |
|
|
| TA8210A?* | 20W BTL Ã 2ch Audio Power Amplifier Source: http://www.semicon.toshiba.co.jp/td/en/ASSP/Audio_ICs/en_20050517_TA8210ALQ_datasheet.pdf |
|
Variants: |
 |
  |
| TA8215H/L | Toshiba 18W BTLx2CH AUDIO POWER AMPLIFIER | |
Variants: |
 |
|
| TA8221AH/AL | 30W BTLx2ch AUDIO POWER AMPLIEFIER | |
Variants: |
 |
|
| TA8229K | TA8229K is an audio power IC with built-in two channels developed for portable radio cassette tape recorder with power ON/OFF switch. Thermal shut down protection circuit is built in. | |
Variants: |
 |
 |
| TA8233H | Toshiba 30W BTLx2CH AUDIO POWER AMPLIFIER | |
Variants: |
 |
|
| TA8238K | http://www.datasheetcatalog.org/datasheet/toshiba/1383.pdf | |
Variants: |
 |
|
| TA8273H | The TA8273H is 4 ch BTL audio power amplifier for car audio application. This IC can generate more high power: POUTMAX = 47 W as it is included the pure complementary PNP and NPN transistor output stage. It is designed low distortion ratio for 4 ch BTL audio power amplifier, built-in stand-by function, muting function, and diagnosis circuit which can detect output to VCC/GND short, output offset voltage and over voltage input mode. Additionally, the AUX amplifier and various kind of protector for car audio use are built-in. | |
Variants: |
 |
|
| TAS5142DDV | STEREO DIGITAL AMPLIFIER POWER STAGE | |
Variants: |
 |
 |
| TAS5142DKD | The TAS5142 is a third-generation, high-performance, integrated stereo digital amplifier power stage with an improved protection system. The TAS5142 is capable of driving a 4-W bridge-tied load (BTL) at up to 100 W per channel with low integrated noise at the output, low THD+N performance, and low idle power dissipation. | |
Variants: |
|
|
| TAS5152 | A low-cost, high-fidelity audio system can be built using a TI chipset, comprised of a modulator (e.g., TAS5508) and the TAS5152. | |
Variants: |
|
|
| TAS5176/TAS5186 | The TAS5176/TAS5186 is a high-performance, six-channel, digital-amplifier power stage with an improved protection system. | |
Variants: |
 |
|
| TAS5182 | 100âW STEREO DIGITAL AMPLIFIER POWER STAGE CONTROLLER | |
Variants: |
 |
 |
| TAS5352 | The TAS5352 is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4-Ω bridge-tied load (BTL) at up to 125 W per channel with low harmonic distortion, low integrated noise, and low idle current. | |
Variants: |
 |
 |
| TAS5518 | The TAS5518 is an eight channel digital pulse width a modulator (PWM) that provides superior dynamic range performance and a high level of system integration. The typical dynamic range in a well-designed system is 110 dB and the power supply volume control (PSVC) feature provides up to 24 dB of additional dynamic range at normal listening levels. The TAS5518 is designed to interface seamlessly with most audio digital signal processors. This device automatically adjusts control configurations in response to clock and data rate changes and idle conditions. This enables the TAS5518 to provide an easy to use control interface with relaxed timing requirements. The TAS5518 can drive eight channels of H-bridge power stages. Texas Instruments H-bridge devices TAS5111, TAS5112, and TAS5182 + FETs are designed to work seamlessly with the TAS5518. The TAS5518 supports both single-ended or bridge-tied load configurations. It also provides a high-performance differential output to drive an external differential input analog headphone amplifier (such as the TPA112). The TAS5518 uses an AD modulation operating at a 384-kHz switching rate for 48-, 96-, and 192-kHz data. The 8x over sampling, combined with a 5th-order noise shaper, provides a broad flat noise floor and excellent dynamic range from 20 Hz to 20 kHz. The TAS5518 is a clock slave-only device. It receives MCLK, SCLK, and LRCLK from other system components. It accepts master clock rates of 128, 192, 256, 384, 512, and 768 Fs and a 64-Fs bit clock. | |
Variants: |
 |
 |
| TAS5630BDKD | 300W STEREO / 600W MONO PurePath ? HD ANALOG-INPUT POWER STAGE CW07/2009 | |
Variants: |
 |
 |
| TAS5630BPHD | 300W STEREO / 600W MONO PurePath ? HD ANALOG-INPUT POWER STAGE CW07/2009 | |
Variants: |
 |
 |
| TAS5710 | Texas Instruments, The TAS5710 is a 20-W, efficient, digital audio power amplifier for driving stereo bridge-tied speakers. A 32-bit datapath eliminates the need for pre-scaling before processing and preserves signal integrity without sacrificing dynamic range. A digital audio processor with fully programmable digital filters allows designers to custom tune speakers for optimum sound in small enclosures. A programmable DRC can adjust power levels for a scaleable design while also enabling night-mode listening modes. | |
Variants: |
 |
 |
| TBA641 | http://www.datasheetcatalog.com/datasheets_pdf/T/B/A/6/TBA641.shtml | |
Variants: |
 |
 |
| TBA800 | http://www.datasheetcatalog.org/datasheets/480/499897_DS.pdf | |
Variants: |
 |
  |
| TBA810AS | http://www.datasheetcatalog.com/datasheets_pdf/T/B/A/8/TBA810AS.shtml | |
Variants: |
 |
|
| TBA820 | http://www.datasheetcatalog.com/datasheets_pdf/T/B/A/8/TBA820.shtml | |
Variants: |
 |
 |
| TBA820M | The TBA820M is a monolithic integrated audio amplifier in a 8 lead dual in-line plastic package. It is intended for use as low frequency class B power amplifier with wide range of supply voltage: 3 to 16V, in portable radios, cassette recorders and players etc. Main features are: minimum working supply voltage of 3V, low quiescent current, low number of external components, good ripple rejection, no cross-over distortion, low power dissipation. Output power: Po = 2Wat 12V/8W, 1.6W at 9V/4W and 1.2W at 9V/8W. | |
Variants: |
 |
|
| TC2001 | TRIPATH TECHNOLOGY | |
Variants: |
 |
 |
| TDA1010A | The TDA1010A is a monolithic integrated class-B audio amplifier circuit in a 9-lead single in-line (SIL) plastic package. The device is primarily developed as a 6 W car radio amplifier for use with 4 Wand 2 Wload impedances. The wide supply voltage range and the flexibility of the IC make it an attractive proposition for record players and tape recorders with output powers up to 10 W. | |
Variants: |
 |
 |
| TDA1015 | The TDA1015 is a monolithic integrated audio amplifier circuit in a 9-lead single in-line (SIL) plastic package. The device is especially designed for portable radio and recorder applications and delivers up to 4 W in a 4 W load impedance. The very low applicable supply voltage of 3,6 V permits 6 V applications. | |
Variants: |
|
|
| TDA1015T | The TDA1010A is a monolithic integrated class-B audio amplifier circuit in a 9-lead single in-line (SIL) plastic package. The device is primarily developed as a 6 W car radio amplifier for use with 4 Wand 2 Wload impedances. The wide supply voltage range and the flexibility of the IC make it an attractive proposition for record players and tape recorders with output powers up to 10 W. | |
Variants: |
 |
 |
| TDA1020 | The TDA1020 is a monolithic integrated 12 W audio amplifier in a 9-lead single in-line (SIL) plastic package. The device is primarily developed as a car radio amplifier. At a supply voltage of VP = 14,4 V, an output power of 7 W can be delivered into a 4 W load and 12 W into 2 W. | |
Variants: |
|
|
| TDA1308 | ||
Variants: |
 |
|
| TDA1516BQ | radio power amplifier
24 W BTL or 2 x 12 watt stereo car |
|
Variants: |
 |
 |
| TDA1517ATW | 8 W BTL or 2 ´ 4 W SE power amplifier | |
Variants: |
 |
 |
| TDA1519* | 22WBTL or 2 ´ 11Wstereo power amplifier | |
Variants: |
 |
   |
| TDA1519CTXX | 22WBTL or 2 ´ 11Wstereo power amplifier | |
Variants: |
 |
  |
| TDA1521Q | 2 x 12 W hi-fi audio power amplifier http://www.datasheetcatalog.org/datasheet/philips/TDA1521Q.pdf |
|
Variants: |
 |
|
| TDA1551Q | The TDA1551Q is an integrated class-B output amplifier encased in a 17-lead single-in-line plastic power package. The device contains 4 ´ 11 W single-ended (SE) or 2 ´ 22 W BTL amplifiers and is intended for use in car radio applications. | |
Variants: |
 |
 |
| TDA1552Q | The TDA1552Q is an integrated class-B output amplifier in a 13-lead single-in-line (SIL) plastic power package. The circuit contains 2 x 22 W amplifiers in Bridge Tied Load (BTL) configuration. The device is primarily developed for car radio applications. | |
Variants: |
 |
 |
| TDA1553CQ | The TDA1553CQ is a monolithic integrated class-B output amplifier in a 13-lead plastic DIL-bent-SIL power package. It contains 2 ´ 22 W amplifiers in BTL configuration. | |
Variants: |
 |
|
| TDA1554 | The TDA1554Q is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package. The circuit contains 4 x 11 W single-ended or 2 x 22 W bridge amplifiers. The device is primarily developed for car radio applications. | |
Variants: |
 |
|
| TDA1555Q | The TDA1555Q contains four identical amplifiers with differential input stages (two inverting and two non-inverting) and can be used for single-ended or bridge applications. The gain of each amplifier is fixed at 20 dB (26 dB in BTL). Special features of this device are: | |
Variants: |
 |
|
| TDA1556Q | 2 x 22 W stereo BTL differential amplifier with speaker protection and dynamic distortion detector | |
Variants: |
 |
|
| TDA1557Q | 2 x 22 W BTL stereo car radio power amplifier with speaker protection | |
Variants: |
 |
|
| TDA1558Q | The TDA1558Q is a monolithic integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package. The device contains 4 x 11 W single-ended or 2 x 22 W BTL amplifiers and has been primarily developed for car radio applications. | |
Variants: |
 |
|
| TDA1560Q | The TDA1560Q is an integrated Bridge-Tied Load (BTL) class-H high power amplifier. In a load of 8 ⦠, the output power is 40 W typical at a THD of 10%. | |
Variants: |
 |
|
| TDA1561Q | The TDA1561Q is a monolithic power amplifier in a 13 lead single-in-line (SIL) plastic power package. It contains two identical 23 W amplifiers. The dissipation is minimized by switching from SE to BTL mode, only when a higher output voltage swing is needed. The device is primarily developed for car radio applications. | |
Variants: |
 |
|
| TDA1562 | 70 W High Efficiency Power Amplifier with diagnostic facility |
|
Variants: |
 |
  |
| TDA1563Q | The TDA1563Q is a monolithic power amplifier in a 17-lead DIL-bent-SIL plastic power package. It contains two identical 25 Wamplifiers. The dissipation is minimized by switching from SE to BTL mode when a higher output voltage swing is needed. The device is primarily developed for car radio applications. | |
Variants: |
 |
|
| TDA1904 | ||
Variants: |
 |
 |
| TDA2003 | Car Radio Audio Amplifier | |
Variants: |
 |
|
| TDA2004 | Power OP AMP | |
Variants: |
  |
 |
| TDA2005 | Power OP AMP | |
Variants: |
|
|
| TDA2006 | AUDIO AMPLIFIER | |
Variants: |
 |
|
| TDA2008 | AUDIO AMPLIFIER | |
Variants: |
 |
|
| TDA2009 | Power OP AMP | |
Variants: |
|
|
| TDA2030 | Power OP AMP | |
Variants: |
|
|
| TDA2040 | Power OP AMP | |
Variants: |
|
|
| TDA2052 | TDA2052 60W Hi-Fi AUDIO POWER AMPLIFIER WITH MUTE / STAND-BY | |
Variants: |
 |
  |
| TDA22003 | The UTC TDA22003 is a class AB stereo audio power amplifier that contains two identical amplifiers capable of delivering 10W per channel. It is designed for quality Hi-Fi stereo applications and is easily constructed and with minimum need of external components | |
Variants: |
 |
|
| TDA2500 | The TDA2500 is a two-channel Amplifier Driver IC that uses Tripathâs proprietary Digital Power Processing (DPPTM) technology. Class-T amplifiers offer both the audio fidelity of Class-AB and the power efficiency of Class-D amplifiers. | |
Variants: |
 |
|
| TDA2540/2541 | The TDA2540 and 2541 are IF amplifier and A.M. demodulator circuits for colour and black and white televisionreceiversusingPNPorNPNtuners. They are intended for reception of negative or positive modulation CCIR standard. | |
Variants: |
 |
|
| TDA2613 | 6 W hi-fi audio power amplifier Philips Semiconductors | |
Variants: |
 |
|
| TDA2615/16 | 2 ´ 6 W hi-fi audio power amplifier Philips Semiconductors | |
Variants: |
 |
|
| TDA3810 | The TDA3810 integrated circuit provides spatial, stereo and pseudo-stereo sound for radio and television equipment. | |
Variants: |
 |
 |
| TDA7050 | ||
Variants: |
 |
|
| TDA7052 | 1 W BTL mono audio amplifier Source : www.datasheetcatalog.org/datasheet/philips/TDA7052_CNV_2.pdf |
|
Variants: |
 |
|
| TDA7056 | The TDA7056 is a mono output amplifier, designed for battery-fed portable radios and mains-fed equipment such as television. For space reasons there is a trend to decrease the number of external components. For portable applications there is also a trend to decrease the number of battery cells, but still a reasonable output power is required. The TDA7056 fulfills both of these requirements. It needs no peripheral components, because it makes use of the Bridge-Tied-Load (BTL) principle. Consequently it has, at the same supply voltage, a higher output power compared to a conventional Single Ended output stage. It delivers an output power of 1 W into a loudspeaker load of 8 W with 6 V supply or 3 W into 16 W loudspeaker at 11 V without need of an external heatsink. The gain is internally fixed at 40 dB. Special attention is given to switch-on/off click suppression, and it has a good overall stability. The load can be short circuited at all input conditions. | |
Variants: |
 |
|
| TDA7056B_VOL-CONTROL | The TDA7056B is a mono Bridge-Tied Load (BTL) output amplifier with DC volume control. It is designed for use in TV and monitors, but is also suitable for battery-fed portable recorders and radios. The device is contained in a 9-pin medium power package. A Missing Current Limiter (MCL) is built in. The MCL circuit is activated when the difference in current between the output terminal of each amplifier exceeds 100 mA (300 mA typ.). This level of 100 mA allows for headphone applications (single-ended). | |
Variants: |
 |
|
| TDA7057Q | The TDA7057Q is a stereo output amplifier in a 13 pin power package. The device is designed for battery-fed portable stereo recorders and radios, but also suitable for mains-fed applications. | |
Variants: |
 |
|
| TDA7240A | The TDA7240A is a 20W bridge audio amplifier IC designed specially for car radio applications. Thanks to the low external part count and compact Heptawatt 7-pin power package the TDA7240A occupies little space on the printed circuit board. | |
Variants: |
 |
|
| TDA7245A | The TDA7245A is a monolithic integrated circuit in 9+9 POWERDIP package, intended for use as low frequency power amplifier in a wide range of applications in radio and TV sets. | |
Variants: |
 |
|
| TDA7253 | 8W AMPLIFIER WITH MUTING | |
Variants: |
 |
 |
| TDA7263 | The TDA7263 is class AB dual audio power amplifier assembled in the new Clipwatt package, specially designed for high quality sound application as HI-FI music centers and stereo TV sets. | |
Variants: |
 |
|
| TDA7264 | The TDA7264 is class AB dual Audio power amplifier assembled in the Multiwatt package, specially designed for high quality sound application as Hi-Fi music centers and stereo TV sets. | |
Variants: |
 |
 |
| TDA7264A | The TDA7264A is class AB dual Audio power amplifier assembled in the Multiwatt package, specially designed for high quality sound application as Hi-Fi music centers and stereo TV sets. | |
Variants: |
 |
|
| TDA7265/TDA7269 | The TDA7265 is class AB dual Audio power amplifier assembled in the Multiwatt package, specially designed for high quality sound application as Hi-Fi music centers and stereo TV sets | |
Variants: |
 |
|
| TDA7266SA | 7W+7W DUAL BRIDGE AMPLIFIER | |
Variants: |
 |
 |
| TDA7293* | 120V - 100W DMOS Audio Amplifier with Mute/Standby | |
Variants: |
 |
  |
| TDA7294* | 100V - 100W DMOS Audio Amplifier with Mute/Standby | |
Variants: |
 |
|
| TDA7295 | The TDA7295 is a monolithic integrated circuit in Multiwatt15 package, intended for use as audio class AB amplifier in Hi-Fi field applications (Home Stereo, self powered loudspeakers, Topclass TV). Thanks to the wide voltage range and to the high out current capability it is able to supply the highest power into both 4W and 8W loads even in presence of poor supply regulation, with high Supply Voltage Rejection. The built in muting function with turn on delay simplifies the remote operation avoiding switching on-off noises. | |
Variants: |
 |
|
| TDA7296 | The TDA7296 is a monolithic integrated circuit in Multiwatt15 package, intended for use as audio class AB amplifier in Hi-Fi field applications (Home Stereo, self powered loudspeakers, Topclass TV). Thanks to the wide voltage range and to the high out current capability it is able to supply the highest power into both 4W and 8W loads even in presence of poor supply regulation, with high Supply Voltage Rejection. The built in muting function with turn on delay simplifies the remote operation avoiding switching on-off noises. | |
Variants: |
 |
|
| TDA7350 | The TDA7350 22W BRIDGE-STEREO AMPLIFIER FOR CAR RADIO,is a new technology class AB Audio Power Amplifier in the Multiwatt® package designed for car radio applications | |
Variants: |
 |
|
| TDA7370B | The TDA7370B is a new technology class AB quad channels Audio Power Amplifier in Multiwatt package designed for car radio applications. Thanks to the fully complementary PNP/NPN output configuration the high power performances of the TDA7370B are obtained without bootstrap capacitors. | |
Variants: |
 |
|
| TDA7372B | ||
Variants: |
 |
|
| TDA7374B | The TDA7374B is a new technology class AB Audio Dual Bridge Power Amplifier in Multiwatt package designed for car radio applications. Thanks to the fully complementary PNP/NPN output configuration the high power performances of the TDA7374B are obtained without bootstrap capacitors. | |
Variants: |
 |
|
| TDA7375 | The TDA7375A is a new technology class AB car radio amplifier able to work either in DUAL BRIDGE or QUAD SINGLE ENDED configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantee the highest power performances with extremely reduced component count. The on board clip detector simplifies gain compression operation. The fault diagnostic makes it possible to detect mistakes during car radio set assembly and wiring in the car. | |
Variants: |
 |
|
| TDA7376B | The TDA7376B is a new technology dual bridge Audio Amplifier in Multiwatt 15 package designed for car radio applications. Thanks to the fully complementary PNP/NPN output stage configuration the TDA7376B delivers a rail-to-rail voltage swing with no need of bootstrap capacitors. Differential input pairs, that will accept either single ended or differential input signals, guarantee high noise immunity making the device suitable for both car radio and car boosters applications. | |
Variants: |
 |
|
| TDA7376PD | 2 X 35W POWER AMPLIFIER FOR CAR RADIO | |
Variants: |
 |
 |
| TDA7377 | The TDA7377 is a new technology class AB car radio amplifier able to work either in DUAL BRIDGE or QUAD SINGLE ENDED configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantees the highest possible power performances with extremely reduced component count. The on-board clip detector simplifies gain compression operation. The fault diagnostics makes it possible to detect mistakes during car radio set assembly and wiring in the car | |
Variants: |
 |
|
| TDA7381 | 4 x 25W QUAD BRIDGE CAR RADIO AMPLIFIER | |
Variants: |
 |
 |
| TDA7384A | The TDA7384A is a new technology class AB Audio Power Amplifier in Flexiwatt 25 package designed for high end car radio applications. Thanks to the fully complementary PNP/NPN output configuration the TDA7384A allows a rail to rail output voltage swing with no need of bootstrap capacitors. The extremely reduced components count allows very compact sets. | |
Variants: |
|
|
| TDA7386 | ||
Variants: |
 |
|
| TDA7388 | The TDA7386 is an AB class audio power amplifier, packaged in Flexiwatt 25 and designed for high end car radio applications. Based on a fully complementary PNP/NPN configuration, the TDA7386 allows a rail to rail output voltage swing with no need of bootstrap capacitors. The extremely reduced boundary components count allows very compact sets. | |
Variants: |
|
|
| TDA7393 | 2 x 35W Dual Bridge Car Radio Amplifier | |
Variants: |
 |
|
| TDA7448 | The TDA7448 is a 6 channel volume controller for quality audio applications in Multi-Channels Audio Systems | |
Variants: |
 |
 |
| TDA7454 | The TDA7454 is a new BCD technology QUAD BRIDGE type of car radio amplifier in Flexiwatt25 packagespecially intendedfor car radio applications. Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets. The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions. | |
Variants: |
 |
|
| TDA7480 | The TDA7480 is an audio class-D amplifier assembled in Power DIP package specially designed for high efficiency applications mainly for TV and Home Stereo sets. | |
Variants: |
 |
|
| TDA7490L | The TDA7490L is a dual audio class D amplifier assembled in Flexiwatt 25 package; it is specially designed for high efficiency application mainly for TV and Home Stereo sets. | |
Variants: |
 |
|
| TDA7491MV/TDA7492MV | The TDA7491MV is a 25 W mono BTL class-D audio amplifierwith single power supply designed for LCD TVs and monitors. The TDA7492MV is a 50 W mono BTL class-D audio amplifier with single power supply designed for home systems and docking stations. | |
Variants: |
 |
|
| TDA7494S | The TDA7494S 10W is class AB power amplifier assembled in the @Multiwatt 15 package, specially designed for high quality sound, TV applications. Features of the TDA7494S include Stand-by and mute functions. | |
Variants: |
 |
|
| TDA7496L | The TDA7496L is a stereo 2W+2W class AB power amplifier assembled in the @ Powerdip 14+3+3 package, specially designed for high quality sound, TV and Monitor applications. Features of the TDA7496L include linear volume control, Stand-by and mute functions. | |
Variants: |
 |
|
| TDA7499 | 6 + 6W STEREO AMPLIFIER WITH MUTE & ST-BY | |
Variants: |
 |
|
| TDA7560 | The TDA7560 is a breakthrough BCD (Bipolar / CMOS / DMOS) technology class AB Audio Power Amplifier in Flexiwatt 25 package designed for high power car radio. The fully complementary P-Channel/N-Channel output structure allows a rail to rail output voltage swing which, combined with high output current and minimised saturation losses sets new power references in the car-radio field, with unparalleled distortion performances. | |
Variants: |
|
|
| TDA8496 | The UTC TDA8496 is a stereo 5+5W class AB power amplifier with mute and dc volume control, assembled in the HZIP-15A/B/D package. It is designed for high quality sound, LCD TV or LCD Monitor applications. | |
Variants: |
 |
|
| TDA8510J/8511J | The TDA8510J is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) power package. It contains a 26 W Bridge-Tied Load (BTL) amplifier and 2 ´ 13 W Single-Ended (SE) amplifiers. The TDA8511J is an integrated class-B output amplifier in a 17-lead DIL-bent-SIL power package. It contains 4 ´ 13 W single-ended amplifiers. | |
Variants: |
 |
|
| TDA8512J | The TDA8512J is an integrated class-B output amplifier in a 17-lead Single-In-Line (SIL) power package. It contains 4 ´ 13 WSingle Ended (SE) amplifiers of which two can be used to configure a 26 W BTL amplifier. | |
Variants: |
 |
|
| TDA8541 | The TDA8541(T) is a one channel audio power amplifier for an output power of 1 W with an 8 Ω load at a 5 V supply. The circuit contains a BTL amplifier with a complementary PNP-NPN output stage and standby/mute logic. The TDA8541T comes in an 8 pin SO package and the TDA8541 in an 8 pin DIP package. | |
Variants: |
 |
 |
| TDA8542 | 2 ´ 1 W BTL audio amplifier | |
Variants: |
 |
 |
| TDA8542TS | 2 ´ 0.7 W BTL audio amplifier | |
Variants: |
 |
 |
| TDA8543 | 2 W BTL audio amplifier | |
Variants: |
 |
 |
| TDA8551 | 1 W BTL audio amplifier with digital volume control | |
Variants: |
 |
|
| TDA8552T/S | 2 ´ 1.4 W BTL audio amplifiers with digital volume control and headphone sensing | |
Variants: |
 |
 |
| TDA8560Q | 2x40W Stereo BTL Amplifier | |
Variants: |
 |
|
| TDA8561Q | The TDA8561Q is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) power package. It contains 4 ´ 12 W Single-Ended (SE) or 2 ´ 24 W Bridge-Tied Load (BTL) amplifiers. | |
Variants: |
 |
|
| TDA8563AQ | The TDA8563AQ is an integrated class-B output amplifier in a 13-lead single-in-line (SIL) power package. It contains 2 ´ 40 W/2 W amplifiers in a BTL configuration. | |
Variants: |
 |
|
| TDA8564Q | The TDA8564Q is an integrated class-B output amplifier in a 17-lead DIL-bent-SIL power package. It contains 4 ´ 12 W single-ended or 2 ´ 24 W bridge amplifiers. | |
Variants: |
|
|
| TDA8565Q | The TDA8565Q is an integrated class-B output amplifier in a 17-lead DIL-bent-to-SIL power package. It contains 4 ´ 12 W single-ended amplifiers. | |
Variants: |
|
|
| TDA8566Q/TH | The TDA8566Q is an integrated class-B output amplifier contained in a 17-lead single-in-line (SIL; bent to DIL) plastic power package. The device contains two amplifiers in a Bridge-Tied Load configuration (BTL). The output power is 2 ´ 25 W in a 4 W load or 2 ´ 40 W in a 2 W load. It has a differential input stage and two diagnostic outputs. The device is primarily developed for car radio applications. The TDA8566TH is an integrated class-B output amplifier contained in a 20-lead small outline plastic package. The device contains 2 amplifiers in a Bridge-Tied Load (BTL) configuration. The output power is 2 ´ 25 W in a 4 W load or 2 ´ 40 W in a 2 W load. It has a differential input stage and 2 diagnostic outputs. The device is primarily developed for car radio applications. | |
Variants: |
 |
|
| TDA8567Q | The TDA8567Q is an integrated class-B output amplifier in a 23-lead Single-In-Line (SIL) plastic power package. It contains four amplifiers in BTL configuration, each with a gain of 26 dB. The output power is 4 ´ 25 W in a 4 W load. | |
Variants: |
 |
 |
| TDA8568Q/TDA8569Q | Philips TDA8568Q 4 x 25 W BTL quad car radio power amplifier, TDA8569Q 4 ´ 40 W BTL quad car radio power amplifier http://www.datasheetcatalog.com/datasheets_pdf/T/D/A/8/TDA8568Q.shtml | |
Variants: |
 |
|
| TDA8571J | 2x40W Stereo BTL Amplifier | |
Variants: |
 |
|
| TDA8580J/TDA8581J | The TDA8580J is a stereo Bridge-Tied Load (BTL) or a quad Single-Ended (SE) amplifier that operates over a wide supply voltage range from 8 to 24 V. This makes it suitable for applications such as television, home-sound systems and active speakers. The TDA8581 is a stereo bridge-tied load (BTL) or a quad single-ended amplifier that operates over a wide supply voltage range from 8 to 28 V. This makes it suitable for many applications, such as car radios, television and home-sound systems. | |
Variants: |
 |
|
| TDA8586Q | Power amplifier with load detection and auto BTL/SE selection | |
Variants: |
 |
|
| TDA8586TH | Power amplifier with load detection and auto BTL/SE selection | |
Variants: |
 |
|
| TDA8587J | 4 ´ 25 W BTL power amplifier and multiple voltage regulator with power switch | |
Variants: |
 |
 |
| TDA8588XJ | I2C-bus controlled 4 ´ 50 Watt power amplifier and multiple voltage regulator | |
Variants: |
 |
 |
| TDA8589XJ | I2C-bus controlled 4 ´ 45 Watt power amplifier and multiple voltage regulator | |
Variants: |
 |
|
| TDA8591J | The TDA8591J is a quad BTL audio power amplifier comprising four independent amplifiers in Bridge Tied Load (BTL) configuration. Each amplifier has a gain of 26 dB and supplies an output power of 75 W (EIAJ) into a 2 W load. The TDA8591J has low quiescent current and is primarily developed for car audio applications. | |
Variants: |
 |
|
| TDA8592J | The TDA8592J is a complementary quad BTL audio power amplifier made in BCDMOS technology. It contains four independent amplifiers in Bridge Tied Load (BTL) configuration. Through the I2C-bus, the diagnostic information of each amplifier and speaker can be read separately | |
Variants: |
 |
 |
| TDA8593J | I2C-bus controlled 4 ´ 45 W power amplifier | |
Variants: |
 |
|
| TDA8920B | The TDA8920B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 ´ 100 W. The device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates over a wide supply voltage range from ±12.5 V to ±30 V and consumes a very low quiescent current. | |
Variants: |
 |
 |
| TDA8920C | The TDA8920C is a high-efficiency class-D audio power amplifier. The typical output power is 2 ´ 110 W with a speaker load impedance of 4 W. The TDA8920C is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from ±12.5 V to ±32.5 V and features low quiescent current consumption. | |
Variants: |
 |
|
| TDA8922C | The TDA8922C is a high-efficiency Class D audio power amplifier. Typical output power is 2 ´ 75 W with a speaker load impedance of 6 W. The TDA8922C is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from ±12.5 V to ±32.5 V and features low quiescent current consumption. | |
Variants: |
 |
|
| TDA8922J | 2 ´ 25 W class-D power amplifier | |
Variants: |
 |
|
| TDA8922TH | The TDA8922C is a high-efficiency Class D audio power amplifier. Typical output power is 2 ´ 75 W with a speaker load impedance of 6 W. The TDA8922C is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from ±12.5 V to ±32.5 V and features low quiescent current consumption. | |
Variants: |
 |
|
| TDA8924TH | The TDA8924 is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 ´ 120 W. The device comes in a HSOP24 power package with a small internal heatsink. Depending on supply voltage and load conditions a very small or even no external heatsink is required. The amplifier operates over a wide supply voltage range from ±12.5 V to ±30 V and consumes a very low quiescent current. | |
Variants: |
 |
|
| TDA8925 | The TDA8925 is a switching power stage for a high efficiency class-D audio power amplifier system. With this power stage a compact 2 ´ 15 W self oscillating digital amplifier system can be built, operating with high efficiency and very low dissipation. No heatsink is required. The system operates over a wide supply voltage range from ±7.5 V up to ±30 V and consumes a very low quiescent current. | |
Variants: |
 |
|
| TDA8927 | Power stage 2 ´ 80 W class-D audio amplifier | |
Variants: |
|
|
| TDA8927TH | Power stage 2 ´ 80 W class-D audio amplifier | |
Variants: |
 |
|
| TDA8931 | The TDA8931 is a switching power stage for high efficiency class-D audio power amplifier systems. It contains a Single-Ended (SE) power stage, drive logic, protection control logic, a full differential input comparator and a HVP charger to charge the SE capacitor. With this amplifier a compact 1 ´ 20 W closed loop self-oscillating digital amplifier system can be built. The TDA8931 has a high efficiency so that a heat sink is not required up to 20 W (RMS). The system operates on an asymmetrical and a symmetrical supply voltage. | |
Variants: |
 |
|
| TDA8932B | The TDA8932B is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 ´ 15 W in stereo half-bridge application (RL = 4 W) or 1 ´ 30 W in mono full-bridge application (RL = 8 W). Due to the low power dissipation the device can be used without any external heat sink when playing music. Due to the implementation of thermal foldback, even for high supply voltages and/or lower load impedances, the device continues to operate with considerable music output power without the need for an external heat sink. | |
Variants: |
 |
  |
| TDA8933B | The TDA8933B is a high-efficiency class D amplifier with low power dissipation. The continuous time output power is 2 ´ 10 W in a stereo half-bridge application (RL = 8 W) or 1 ´ 20 W in a mono full-bridge application (RL =16 W). Due to the low power dissipation the device can be used without any external heat sink when playing music. Due to the implementation of Thermal Foldback (TF) the device remains operating with considerable music output power without the need for an external heat sink, even for high supply voltages and/or lower load impedances. | |
Variants: |
 |
 |
| TDA8943SF | 6 W mono Bridge Tied Load (BTL) audio amplifier | |
Variants: |
 |
|
| TDA8945S | The TDA8945S is a single-channel audio power amplifier with an output power of 15 W at an 8 W load and an 18 V supply. The circuit contains a Bridge Tied Load (BTL) amplifier with an all-NPN output stage and standby/mute logic. The TDA8945S comes in a 9-lead single in-line (SIL) power package. The TDA8945S is printed-circuit board (PCB) compatible with all other types in the TDA894x family. One PCB footprint accommodates both the mono and the stereo products. | |
Variants: |
 |
|
| TDA8947J | The TDA8947J contains four identical audio power amplifiers. The TDA8947J can be used as: four Single-Ended (SE: 1 W to 25 W; BTL: 4 W to 50 W)) channels with a fixed gain of 26 dB, two times Bridge-Tied Load (BTL) channels with a fixed gain of 32 dB or two times SE channels (26 dB gain) plus one BTL channel (32 dB gain) operating as a 2.1 system. | |
Variants: |
 |
|
| TDA8950 | The TDA8950 is a high-efficiency Class D audio power amplifier. The typical output power is 2 ´ 150 W with a speaker load impedance of 4 W. The TDA8950 is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from ±12.5 V to ±40 V and features low quiescent current consumption. | |
Variants: |
 |
|
| TDA8954 | The TDA8954 is a stereo or mono high-efficiency Class D audio power amplifier in a single IC featuring low power dissipation. It is designed to deliver up to 2 à 210 W into a 4 Ω load in a stereo Single-Ended (SE) application, or 1 à 420 W into an 8 Ω load in a mono Bridge-Tied Load (BTL) application. | |
Variants: |
 |
|
| TDF8530TH | The TDF8530 is a quad Bridge-Tied Load (BTL) car audio amplifier comprising an NDMOST-NDMOST output stage based on SOI BCDMOS technology. Low power dissipation enables the TDF8530 high-efficiency, class-D amplifier to be used with a smaller heat sink than those normally used with standard class-AB amplifiers. The TDF8530 can operate in either non-I2C-bus mode or I2C-bus mode. When in I2C-bus mode, DC load detection results and fault conditions can be easily read back from the device. Up to 12 I2C-bus addresses can be selected depending on the value of the external resistors connected to pins ADS and MOD. When pin ADS is short circuited to ground, the TDF8530 operates in non-I2C-bus mode. Switching between Operating mode and Mute mode in non-I2C-bus mode is only possible using pins EN and SEL_MUTE. | |
Variants: |
 |
 |
| TDF8555J | The TDF8555J is one of a new generation of complementary quad Bridge-Tied Load (BTL) audio power amplifiers with full I2C-bus controlled diagnostics, multiple voltage regulator and two power switches intended for automotive applications. The TDF8555J can operate at a battery voltage as low as 6 V making this amplifier suitable for stop/start-car operation. The amplifier uses a complementary DMOS output stage in a Silicon-On-Insulator (SOI)-based BCD process. The DMOS output stage ensures a high power output signal with perfect sound quality. The SOI-based BCD process ensures a robust amplifier, where latch-up cannot occur, with good separation between the four independent channels with every component isolated and without substrate currents. | |
Variants: |
 |
|
| TEA2025 | DUAL OR BRIDGE CONNECTION MODES FEW EXTERNAL COMPONENTS SUPPLY VOLTAGE DOWN TO 3V HIGH CHANNEL SEPARATION VERY LOW SWITCH ON/OFF NOISE MAX GAIN OF 45dB WITH ADJUST EXTERNAL RESISTOR SOFT CLIPPING THERMAL PROTECTION 3V < VCC < 15V P = 2 · 1W, VCC = 6V, RL = 4W P = 2 · 2.3W, VCC = 9V, RL = 4W P = 2 · 0.1W, VCC = 3V, RL = 4W | |
Variants: |
 |
|
| TFA9810 | The TFA9810 is a two-channel power comparator for high-efficiency class D audio amplifier systems. It contains two full-bridge Bridge-Tied Load (BTL) power stages, drive logic, protection control logic and full differential input comparators. By using this power comparator a compact closed-loop self-oscillating digital amplifier system or open-loop system can be built. The TFA9810 does not require a heat sink and operates using an asymmetrical supply voltage. | |
Variants: |
 |
|
| TFA9815 | The TFA9815 is a 2-channel power comparator for high-efficiency class D audio amplifier systems. It contains two full-bridge Bridge-Tied Load (BTL) power stages, drive logic, protection control logic and full differential input comparators. By using this power comparator a compact closed-loop self-oscillating digital audio amplifier system or open-loop system can be built. The continuous output power is 2 ´17 W in a full-bridge BTL application. The TFA9815 does not require a heat sink and operates using an asymmetrical supply voltage. | |
Variants: |
 |
|
| TFA9841J | The TFA9841J contains one audio power amplifier. The TFA9841J can be used as one Single-Ended (SE) channel with a fixed gain of 26 dB. The TFA9841J comes in a 9-pin DIL-bent-SIL (DBS9P) power package. The TFA9841J is pin compatible with the TFA9842J and TFA9843J. The TFA9841J contains a unique protection circuit that is solely based on multiple temperature measurements inside the chip. This gives maximum output power for all supply voltages and load conditions with no unnecessary audio holes. Almost any supply voltage and load impedance combination can be made as long as thermal boundary conditions (external heatsink and ambient temperature) allow it. | |
Variants: |
 |
 |
| TFA9842J | The TFA9842J contains two identical audio power amplifiers. The TFA9842J can be used as two Single-Ended (SE) channels with a fixed gain of 26 dB or one Bridge-Tied Load (BTL) channel with a fixed gain of 32 dB. The TFA9842J comes in a 9-pin DIL-bent-SIL (DBS9P) power package. The TFA9842J is pin compatible with the TFA9841J and TFA9843J. The TFA9842J contains a unique protection circuit that is solely based on multiple temperature measurements inside the chip. This gives maximum output power for all supply voltages and load conditions with no unnecessary audio holes. Almost any supply voltage and load impedance combination can be made as long as thermal boundary conditions (number of channels used, external heatsink and ambient temperature) allow it. | |
Variants: |
 |
|
| TFA9843J | The TFA9843J contains two identical audio power amplifiers. The TFA9843J can be used as two Single-Ended (SE) channels with a fixed gain of 26 dB or one Bridge-Tied Load (BTL) channel with a fixed gain of 32 dB. The TFA9843J comes in a 9-pin DIL-bent-SIL (DBS7P) power package. The TFA9843J is pin compatible with the TFA9842J and TFA9841J. The TFA9843J contains a unique protection circuit that is solely based on multiple temperature measurements inside the chip. This gives maximum output power for all supply voltages and load conditions with no unnecessary audio holes. Almost any supply voltage and load impedance combination can be made as long as thermal boundary conditions (number of channels used, external heatsink and ambient temperature) allow it. | |
Variants: |
 |
|
| TP2350B | The TP2350B is a two-channel, 300W (4Ω) per channel Amplifier Driver that uses Tripathâs proprietary Digital Power Processing (DPPTM) technology. Class-T amplifiers offer both the audio fidelity of Class-AB and the power efficiency of Class-D amplifiers. | |
Variants: |
 |
 |
| TPA3106D1 | 40-W MONO CLASS-D AUDIO POWER AMPLIFIER | |
Variants: |
 |
 |
| TPA3107D2 | 15-W STEREO CLASS-D AUDIO POWER AMPLIFIER | |
Variants: |
 |
 |
| TPA3110D2-Q1 | 15-W Filter-Free Stereo Class-D Audio Power Amplifier with SpeakerGuard | |
Variants: |
 |
 |
| TPA3111D1 | 10-W FILTER-FREE MONO CLASS-D AUDIO POWER AMPLIFIER with SPEAKER GUARnd | |
Variants: |
 |
|
| TPA6021A4 | The TPA6021A4 is a Texas Instruments stereo audio power amplifier that drives 2 W/channel of continuous RMS power into a 4-W load when utilizing a heat sink. Advanced dc volume control minimizes external components and allows BTL (speaker) volume control and SE (headphone) volume control. | |
Variants: |
 |
|
| TPS1035 | TPS1035 is a MONO ended 20W continuous average power per channel, Class-T Digital Audio Power A m p l i f i e r u s i n g T r i p a t h â s p r o p r i e t a r y D i g i t a l P o w e r P r o c e s s i n gT M t e c h n o l o g y . | |
Variants: |
 |
 |
| UL1401*2/3/5 | Polish CEMI UL1401,UL1402,UL1403,UL1405 | |
Variants: |
 |
 |
| UL1440 | ||
Variants: |
  |
|
| UL1498/97/96 | AF AMPLIEFIERS 1,2W | |
Variants: |
 |
|
| UPC1213C | AUDIO POWER AMPLIEFIER AT 9-VOLT POWER SUPPLY | |
Variants: |
 |
 |
| UPC1237HA | ||
Variants: |
 |
|
| UPC1277H | The uPC1277H is a dual audio power ampliifier designed for a stereo radio cassette and in a 12-pin SIP power single in line plastic package.The uPC1277H has two audio power amplifiers and each of two provides 4,2 W output power at 12V/4 OHMS. | |
Variants: |
 |
 |
| UPC1298V | The uPC1298V is an integrated monolithic circuit in a 14-SQL type package designed for use in 50W to 80W class HiFi audio power amplifier applications. This device consists of an input differential amplifier, a predriver circuit, a driver circuit, and an over current protection circuit. | |
Variants: |
 |
 |
| UPC2500A | 45W AF power amplifier. | |
Variants: |
 |
|
| YD1028 | 18W CAR RADIO POWER AMPLIFIER | |
Variants: |
 |
|
| YD6283 | YD6283 is an audio power IC with built-in two channels developed for portable radio cassette tape recorder. Because of the parts reduction and SIP (Single In line Package), space merit is remarkable. Thermal shut down protection circuit is built in. | |
Variants: |
 |
|
List of symbols
List of packages
| Name | View | Description |
|---|---|---|
| 12-DIPH-300 | |
Dual In Line Package |
| 14-DIPH-300 | |
Dual In Line Package |
| 4150-1X8SF1 | |
|
| BGA20-TLA20 | |
DSBGA20-TLA20_ 2.792x2.258 BODY. www.ti.com/audio |
| BGA_MIKRO-SMD-9BUMP | |
BGA-Package Number TLA09 www.national.com |
| CB21 | |
|
| CB360 | |
TO-220 5 lead |
| CE-50/TO3 | |
TO-3 National Semiconductor K08A |
| CE82 | |
Package DIL 16 (CE83) |
| CLIPWATT11 | |
|
| CLIPWATT15 | |
|
| CLIPWATT19 | |
CLIPWATT 19 |
| DDPACK-9 | |
DDPAK-9 |
| DIL08 | |
Dual In Line Package |
| DIL08-TAB | |
Dual In Line Package With TAB |
| DIL14 |  |
Dual In Line Package |
| DIL16 | |
|
| DIL18 | |
Dual In Line Package |
| DIL20 | |
Dual In Line Package |
| DIL24-SHRUNK_1,778 | |
24-Lead Shrunk DIL Plastic Package |
| DIP18-POWER | |
|
| DSBGA42 | |
DSBGA42 www.ti.com |
| FINDIP12 | |
|
| FLEXIWATT15 |  |
Flexiwatt15 |
| FLEXIWATT25 | |
Flexiwatt25 (vertical) |
| FLEXIWATT27 | |
Flexiwatt27 |
| HEPTAW.H | |
|
| HEPTAWATT | |
HEPTAWATT 7 |
| HLQFP-32 | |
|
| HSIP010-P-0000B-2,54 | |
|
| HSIP011-P11A | |
Single-In-Line Package,NS Package Number P11A. http://www.ti.com/sc/docs/package/guide.htm |
| HSIP012-P-0000A-1,27 | |
|
| HSIP012-P-0000B-2,54 | |
|
| HSIP07-P-M01-2,54 | |
|
| HSIP09-P-0000-2,54 | |
|
| HSIP13H-3107 | |
|
| HSIP15 | |
|
| HSIP15-P-2.00A | |
|
| HSIP17-P-2.00 | |
HSIP17-P-2.00 Source: http://www.semicon.toshiba.co.jp/td/en/ASSP/Audio_ICs/en_20050517_TA8210ALQ_datasheet.pdf |
| HSIP18-P-3109-2 |  |
3109-SIP18H |
| HSOP056-P-0300A | |
|
| HSOP20 |  |
HSOP20 |
| HSOP25 |  |
HSOP 25 Source: http://www.rohm.com/products/databook/motor/pdf/bd623x_series-e.pdf |
| HSOP28 | |
|
| HSOP44 | |
44 LEAD HSOP W/PROTRUDING HEADSINK Source: http://www.freescale.com/files/shared/doc/package_info/98ARH98330A.pdf |
| HSSOP-44-DKD | |
HSSOP44-DKD. www.ti.com/audio |
| HSSOP52-8.4X17.5-0.65 | |
P-HSSOP52-8.4x17.5-0.65 |
| HTQFP-64-PAP | |
PAP (S-PQFP-G46) PowerPAD Package Source: http://focus.ti.com/lit/ds/symlink/ads1274.pdf www.ti.com .. slma002.pdf |
| HTQFP-64-PHD |  |
PHD (S-PQFP-G64). www.ti.com/audio |
| HTQFP48 | |
|
| HTSSOP24 | |
HTSSOP24 |
| HTSSOP32DAP | |
PowerPAD(TM) PLASTIC SMALL-OUTLINE PACKAGE |
| HTSSOP44DCP |  |
PowerPAD(TM) PLASTIC SMALL-OUTLINE PACKAGE DCP (R-PDSO-G**) Source: http://focus.ti.com/lit/ml/mpds041b/mpds041b.pdf / slma002.pdf |
| HTSSOP44DDV | |
PowerPAD(TM) PLASTIC SMALL-OUTLINE PACKAGE DDV (R-PDSO-G**) Source: http://focus.ti.com/lit/ml/mpds041b/mpds041b.pdf / slma002.pdf |
| HTSSOP56DCA | |
PowerPAD(TM) PLASTIC SMALL-OUTLINE PACKAGE DCA (R-PDSO-G**) Source: http://focus.ti.com/lit/ml/mpds044/mpds044.pdf / slma002.pdf |
| HVQFN20_6X5X0,85 | |
HVQFN20: plastic thermal enhanced very thin quad flat package; no leads; 20 terminals; body 6 x 5 x 0.85 mm SOT910-1 |
| HVQFN24 |  |
plastic thermal enhanced very thin quad flat package SOT616-1 no leads; 24 terminals; body 4 x 4 x 0.85 mm Source: PCA9555_5.pdf |
| HVQFN32 |  |
HVQFN32 (SOT617-3) 5 x 5 x .85 mm, Pitch 0.5mm Source: http://www.semiconductors.philips.com/acrobat_download/datasheets/TDA9885_TDA9886_2.pdf |
| HVSON8 |  |
|
| HZIP015-P-0745A-1,27 | |
|
| HZIP016-P-0665B-1,788 | |
|
| HZIP023-P-FP-1,27 | |
23-Lead ZSIL Plastic package with FIN |
| HZIP12-P-1,78B | |
|
| HZIP14-B-3113HZ-1,78 |  |
|
| HZIP17-P-2.00 | |
HZIP17-P-2.00 Source: http://www.semicon.toshiba.co.jp/td/en/ASSP/Audio_ICs/en_20050517_TA8210ALQ_datasheet.pdf |
| HZIP25-P-1.00F | |
HZIP25-P-1.00F |
| LFCSP64 | |
64-Lead Lead Frame Chip Scale Package [LFCSP] CP-64-3 9 x 8,75 mm Body Source: http://www.analog.com/UploadedFiles/Packages/40887351787287CP_64_3.pdf |
| LLP10-LDA10A | |
LLP10-LDA10A_3x3 body www.national.com |
| LLP10-LDA10B | |
LLP10 -Package Number LDA10B 3x4 body. www.national.com |
| LQFP-64_20X14 | |
64-PIN-LQFP_20x14 |
| MMSOP08 | |
Molded Mini Small Outline Package 8 - Lead (0.118" Wide) NS Package Number MUA08A Source: http://cache.national.com/ds/LM/LM386.pdf |
| MSOP10 | |
10-Lead Mini Small Outline Package [MSOP] MUB10A www.national.com |
| MSOP8 | |
Micro Small Outline Package Grid .65mm |
| MULTIWAT-SIL13 | |
DBS13P plastic DIL-bent-SIL power package 13 leads (lead length 12 mm) SOT141-6 Source: TDA1516BQ_1.pdf |
| MULTIWAT-SIL17 |  |
DBS17P plastic DIL-bent-SIL power package 17 leads (lead length 12 mm) SOT243-1 |
| MULTIWAT11H | |
Multiwatt11 H (Short leads) |
| MULTIWATT-11 | |
Muliwatt 11 lead |
| MULTIWATT-15H | |
Multiwatt 15 horizontal |
| MULTIWATT-15V | |
Multiwatt 15 vertical |
| MULTIWATT8 | |
|
| PENTAWATT-V | |
|
| PFM-TB15A | |
www.ti.com/audio |
| PQFP64-PHD | |
64-Pin QFP (PHD) power package |
| PQFP64-PN | |
PAG (S-PQFP-G64) |
| PSO36 | |
36 LEADS POWER SMALL OUTLINE PACKAGE Source: http://www.st.com/stonline/books/pdf/docs/9426.pdf |
| PSO44_0,635 | |
|
| PSOP36_DKD | |
36-Lead Power Small Ou t l i ne Package ( P S O P ) , s i m i l a r t o JEDEC out l i ne MO- 1 6 6 , var i a t i on AE:f |
| PSOP44L |  |
Plastic Small Outline Package |
| PSSO-36SD | |
PowerSSO-36 slug down package |
| SIL08 | |
single in line 7 diodes with common anode |
| SIL9-2,54 |  |
|
| SIP10 |  |
|
| SIP11 | |
TO-220 11 lead, National Semiconductor |
| SIP12 | |
|
| SIP13 |  |
|
| SIP7 |  |
|
| SIP8 | |
|
| SO08 | |
Small Outline Package 8 NS Package M08A |
| SO20 | |
SO20 - Small Outline Package 7.6 x 13.0 mm |
| SO20_SOT163-1-R |  |
SO20 / SOT163-1 Reflow soldering Philips SC01_Mounting_1996.pdf |
| SO20_SOT163-1-W |  |
SO20 / SOT163-1 Wave soldering Philips SC01_Mounting_1996.pdf |
| SO32X |  |
SMALL OUTLINE INTEGRATED CIRCUIT extra wide body 8.9 mm/JEDEC MO-120AC |
| SO36 |  |
SO36: plastic small outline package; 32 leads; body width 7.5 mm |
| SO36-POWER_SLUG_UP | |
|
| SO44 |  |
Small Outline Package |
| SO8 | |
|
| SOIC08_JEDEC_300MIL | |
SOIC 08 JEDEC 150mil Small Outline Narrow Plastic Gull Wing 150-mil body, package type SN |
| SOIC16N | |
SOIC16N SMALL OUTLINE INTEGRATED CIRCUIT NARROW |
| SOIC28L | |
SMALL OUTLINE PACKAGE 17.9 x 10.3 |
| SOIC8 | |
Small Outline IC |
| SOP018-P-0300 | |
SMALL OUTLINE PACKAGE |
| SOP08 | |
|
| SOP16 | |
|
| SOT109-1 | |
|
| SOT110-1 | |
SIL9MPF: plastic single in-line medium power package with fin; 9 leads |
| SOT131-2H | |
|
| SOT141-6 | |
|
| SOT157-2 | |
|
| SOT162-1 | |
Small Outline Package |
| SOT163-1 | |
|
| SOT243-1 | |
DBS17P: plastic DIL-bent-SIL power package; 17 leads (lead length 7.7 mm) |
| SOT266-1 | |
Small Outline Package |
| SOT287-1 | |
SMALL OUTLINE INTEGRATED CIRCUIT wide body 7.5 mm/JEDEC MO-119AB |
| SOT354-1 | |
|
| SOT38-1 | |
Dual In Line Package |
| SOT397-1 | |
|
| SOT411-1 | |
|
| SOT418-3 | |
|
| SOT521-1 | |
|
| SOT523-1 | |
|
| SOT527-1 | |
|
| SOT549-1 | |
PowerPAD(TM) PLASTIC SMALL-OUTLINE PACKAGE DAP (R-PDSO-G**) |
| SOT566-3 | |
|
| SOT57 | |
|
| SOT577-2 | |
|
| SOT668-2 | |
RDBS17P: plastic rectangular-DIL-bent-SIL (reverse bent) power package; 17 leads (row spacing 2.54 mm) |
| SOT725-1 | |
|
| SOT767-1 | |
|
| SOT909-1 | |
|
| SOT96-1 | |
Small Outline Narrow Plastic Gull Wing 150-mil body, package type SN |
| SOT97-1 | |
Dual In Line Package |
| SQL-14 | |
|
| SQL-27 | |
|
| SSIP-32 | |
32-pin SSIP Source: http://www.tripath.com/audio.htm |
| SSOP-A16 | |
Small Shrink Outline Package |
| SSOP044J | |
SANYO : SSOP44J(275mil) |
| SSOP16 |  |
Small Shrink Outline Package |
| SSOP20-225MIL | |
Small Shrink Outline Package 225mil SANYO Semiconduktor |
| SSOP44_DB | |
SSOP044_DB_7,5X17,83X0,8 |
| STK4241/2 | |
|
| STK428-430 | |
|
| TA11B | |
TO-220 11 lead, National Semiconductor |
| TA15A | |
TA15A www.national.com |
| TA15B | |
TA15B |
| TF11B | |
TO-220 11 lead, National Semiconductor |
| TF15A | |
TF15A www.national.com |
| TO-220-27TA | |
TO-220_MKT-TA27A , MOLDED (inch. 1,150x0,618x0,177 - body_0,040 pitch ) |
| TO204AA |  |
JEDEC TO-204AA Package |
| TO220-15 | |
|
| TO220Z9 | |
9-lead single in-line (TO220Z9) plastic power package |
| TQFN28-5X5X0,8 | |
TQFN28-5x5x0,8 Source: www.maxim-ic.com/packages |
| TQFN32_5X5 | |
TQFN32-5x5x0,8mm. Source: www.maxim-ic.com/packages |
| TQFN32_7X7 | |
TQFN 7x7 mm Source: www.maxim-ic.com/packages .. 90-0125.pdf |
| TQFN56L | |
TQFN56L-8x8x0,8mm www.maxim-ic.com/packages |
| TQFP64L-10X10X2.0MM | |
TQFP 64L-10X10X1,4 MM www.maxim-ic.com/packages |
| TSSOP10 | |
TSSOP10 Package Number MXF10A. www.national.com |
| TSSOP28-PWP | |
Power Thin Shrink Small Outline Plastic 28 |
| TSSOP8 | |
Thin Shrink Small Outline Package package type ST |
| VSSOP10 | |
VSSOP10- DGS_(SPDSO-G10) www.ti.com/audio |
| VSSOP8 | |
LGA 4x4 DGK. www.ti.com/audio |
| WLP9 | |
WLP9 PACKAGE CODE BGA W91F1+1 www.maxim-ic.com/packages |
| WSON8 | |
LLP4x4 body. http://www.ti.com/sc/docs/package/guide.htm |
| ZIP12/CPP-12 |  |
Single In Line Socket |
| ZSIL23/23-ZSIP-FP-1,27 |  |