Facebook Official Page
Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
ESP8266 LM2596 7805 7 SEGMENT POTENTIOMETER ARDUINO SWITCH RELAY 1N4007 LCD ATMEGA 433 MHZ OLED TO252 BLUETOOTH MODULE ACS712 ARDUINO NANO MOSFET JST POLOLU TRANSFORMER MURATA 315 MHZ PCB ANTENNA BATTERY SD CARD
Ohter interesting searches:
BOURNS CONNECTOR USB 3.0 11F TL431 40106 400 CAPACITOR 400V CAPACITOR 420 HIROSE USB RASPBERRY PHOENIX CSR TUBE TL431 MICROCHIP ATX CONNECTOR DOME TERMINAL BLOCK 433 MHZ PCB ANTENNA 1N 1N BLUETOOTH CONNECTOR USB 3.0 ACDC LM393
EAGLE Library Structure
|Uploaded by:||Maurits Hartman|
|Download options:||Download original file|
( 6.5 KiB )Download file converted
to the latest EAGLE format
( 17.7 KiB )
This file has no description inside.
Below description of the library from CadSoft webpage:
|Name & variants||Symbol||Package|
|CON2||Connector 2 pin
Two pin header connector.
|DS1302||DS1302 Realtime Clock
The DS1302 trickle-charge timekeeping chip contains a real-time clock/calendar and 31 bytes of static RAM. It communicates with a microprocessor via a simple serial interface. The real-time clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with an AM/PM indicator.
Interfacing the DS1302 with a microprocessor is simplified by using synchronous serial communication. Only three wires are required to communicate with the clock/RAM: CE, I/O (data line), and SCLK (serial clock). Data can be transferred to and from the clock/RAM 1 byte at a time or in a burst of up to 31 bytes. The DS1302 is designed to operate on very low power and retain data and clock information on less than 1ÂµW.
The DS1302 is the successor to the DS1202. In addition to the basic timekeeping functions of the DS1202, the DS1302 has the additional features of dual power pins for primary and backup power supplies, programmable trickle charger for VCC1, and seven additional bytes of scratchpad memory.
|LT1529||LT1529 5 Volt LDO Regulator
5 Volt, 3 Ampere Low Dropout voltage regulator.
|LTC1440||LTC1440 - Ultralow Power Single / Dual Comparator