Facebook Official Page


Share EAGLE library

Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?




DIY Modules Eagle Library version 1.8.0 has been released.


DIY Modules Eagle Library version 1.7.0 has been released.


DIY Modules Eagle Library version 1.6.0 has been released.

More news...

EAGLE Library Object

File details

File name:atmel.lbr
Uploaded by:kylie
Download options:Download original file
from DIYmodules.org
( 1,952.7 KiB )
Download file converted
to the latest EAGLE format
( 1,952.7 KiB )

Object details

Description:MICROCONTROLLER Features High-performance, Low-power 8/16-bit AVR XMEGA Microcontroller Non-Volatile Program and Data Memories - 16 KB - 128 KB of In-System Self-Programmable Flash
- 4 KB - 8 KB Boot Code Section with Independent Lock Bits
- 1 KB - 2 KB EEPROM
- 2 KB - 8 KB Internal SRAM Peripheral Features - Four-channel DMA Controller with support for external requests
- Eight-channel Event System
- Five 16-bit Timer/Counters Three Timer/Counters with 4 Output Compare or Input Capture channels Two Timer/Counters with 2 Output Compare or Input Capture channels High-Resolution Extensions on all Timer/Counters Advanced Waveform Extension on one Timer/Counter - Five USARTs IrDA Extension on one USART - Two Two-Wire Interfaces with dual address match (I2C and SMBus compatible)
- Two SPIs (Serial Peripheral Interfaces) peripherals
- AES and DES Crypto Engine
- 16-bit Real Time Counter with Separate Oscillator
- One Twelve-channel, 12-bit, 2 Msps Analog to Digital Converter
- One Two-channel, 12-bit, 1 Msps Digital to Analog Converter
- Two Analog Comparators with Window compare function
- External Interrupts on all General Purpose I/O pins
- Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator Special Microcontroller Features
- Power-on Reset and Programmable Brown-out Detection
- Internal and External Clock Options with PLL
- Programmable Multi-level Interrupt Controller
- Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby
- Advanced Programming, Test and Debugging Interfaces PDI (Program and Debug Interface) for programming, test and debugging I/O and Packages - 34 Programmable I/O Lines
- 44 - lead TQFP
- 44 - pad VQFN/QFN
- 49 - ball VFBGA Operating Voltage - 1.6 - 3.6V Speed performance - 0 - 12 MHz @ 1.6 - 3.6V
- 0 - 32 MHz @ 2.7 - 3.6V

Drawn by Dipl.-Ing. (FH) Robert Siegler

Created: 27.05.09




PreviewPreview Preview


PreviewPreview Preview
Copyright © 2015-2017 DIYmodules.org|Contact webmaster
Our website uses icons made by www.icondrawer.com