Facebook Official Page
Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
ARDUINO NANO POTENTIOMETER 7805 ATMEGA LM2596 BATTERY ARDUINO OLED SWITCH ESP8266 MOSFET 7 SEGMENT TERMINAL BLOCK SD CARD RELAY AMS1117 1N4007 POLOLU TRANSFORMER LCD CONNECTOR 433 MHZ IR2110 JST MOTOR
Ohter interesting searches:
DIODE 315 MHZ PCB ANTENNA CAPACITOR TEXAS QFN ATMEGA328P BLUETOOTH BOURNS ATMEGA328 STM32F4 ACS712 ATX CONNECTOR ESP HX711 NRF24L01 ESP32 RESISTOR BLUETOOTH MODULE GPS TO252 PANASONIC 400 CAPACITOR USB 3.0 DISPLAY HIROSE
EAGLE Library Object
|Uploaded by:||Juergen Messerer|
|Remarks:||This library is a part of the archive file m-pad-2.1.zip|
Show other files in the archive
|Download options:||Download whole archive|
( 303.9 KiB )Download original file
( 1,153.0 KiB )Download file converted
to the latest EAGLE format
( 2,969.6 KiB )
|Description:||BlueGiga's WT12 Bluetooth Module (2.0+EDR)|
BlueCore4 is a single chip Bluetooth solution which implements the Bluetooth radio transceiver and also an on chip microcontroller.
BlueCore4 implements Bluetooth® 2.0+EDR (Enhanced Data Rate) and it can deliver data rates up to 3 Mbps.
The microcontroller (MCU) on BlueCore04 acts as interrupt controller and event timer run the Bluetooth software stack and control the radio and host interfaces.
A 16-bit reduced instruction set computer (RISC) microcontroller is used for low power consumption and efficient use of memory.
BlueCore04 has 48Kbytes of on-chip RAM is provided to support the RISC MCU and is shared between the ring buffers used to hold
voice/data for each active connection and the general purpose memory required by the Bluetooth stack.
Featrures: Fully Qualified Bluetooth system v2.0 + EDR, CE and FCC Integrated chip antenna Industrial temperature range from -40oC to +85oC Enhanced Data Rate (EDR) compliant with v2.0.E.2 of specification for both 2Mbps and 3Mbps modulation modes RoHS Compliant Full Speed Bluetooth Operation with Full Piconet Scatternet Support USB version 1.2 UART with bypass mode Support for 802.11 Coexistence 8Mbits of External Flash Applications: Hand held terminals Industrial devices Point-of-Sale systems PCs Personal Digital Assistants (PDAs) Computer Accessories Access Points
Please send any comments to: email@example.com