Facebook Official Page
Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
ESP8266 LM2596 7805 7 SEGMENT POTENTIOMETER ARDUINO SWITCH RELAY 1N4007 LCD ATMEGA 433 MHZ OLED TO252 BLUETOOTH MODULE ACS712 ARDUINO NANO MOSFET JST POLOLU TRANSFORMER MURATA 315 MHZ PCB ANTENNA BATTERY TL431
Ohter interesting searches:
CAPACITOR USB TYPE C ESP STM32F4 INDUCTOR LM3886 RCA ANTENNA ANALOG DISPLAY CC2500 CONNECTOR USB 3.0 HIROSE USB GPS OMRON MICROCHIP TUBE USB TYPE C FUSE MCP ANALOG 1N CURRENT TRANSFORMER TRANSISTOR 7404
EAGLE Library Object
|Uploaded by:||Juergen Messerer|
|Remarks:||This library is a part of the archive file m-pad-2.1.zip|
Show other files in the archive
|Download options:||Download whole archive|
( 303.9 KiB )Download original file
( 1,153.0 KiB )Download file converted
to the latest EAGLE format
( 2,969.6 KiB )
|Description:||Ti's TPS2042 CURRENT-LIMITED, POWER-DISTRIBUTION SWITCHES|
The TPS204xB/TPS205xB power-distribution switches are intended for applications where heavy capacitive
loads and short circuits are likely to be encountered. These devices incorporates 70-mW N-channel MOSFET
power switches for power-distribution systems that require multiple power switches in a single package. Each
switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to
control the power-switch rise times and fall times to minimize current surges during switching. The charge pump
requires no external components and allows operation from supplies as low as 2.7 V.
When the output load exceeds the current-limit threshold or a short is present, the device limits the output current
to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When
continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction
temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal
shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains
off until valid input voltage is present. This power-distribution switch is designed to set current limit at 1 A
Features: 70-mW High-Side MOSFET 500-mA Continuous Current Thermal and Short-Circuit Protection Accurate Current Limit (0.7 A min, 1.3 A max) Operating Range: 2.7 V to 5.5 V 0.6-ms Typical Rise Time Undervoltage Lockout Deglitched Fault Report (OC) No OC Glitch During Power Up Maximum Standby Supply Current: 1-uA (Single, Dual) or 2-uA (Triple, Quad) Bidirectional Switch Ambient Temperature Range: -40°C to 85° ESD Protection UL Recognized, File Number E169910 Applications: Heavy Capacitive Loads Short-Circuit Protections
Please send any comments to: email@example.com