Facebook Official Page

www.facebook.com/DIYmodules

Share EAGLE library

Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?

More...

News

2017-07-02

DIY Modules Eagle Library version 1.8.0 has been released.

2017-05-20

DIY Modules Eagle Library version 1.7.0 has been released.

2017-05-03

DIY Modules Eagle Library version 1.6.0 has been released.

More news...

EAGLE Library Object

File details

File name:microchip-dspic33fjxxmc.lbr
Uploaded by:Steven Lee
Download options:Download original file
from DIYmodules.org
( 71.3 KiB )
Download file converted
to the latest EAGLE format
( 130.6 KiB )

Object details

Name:DSPIC33FJ64MC804
Type:device
Description:dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04, AND dsPIC33FJ128MCX02/X04
High-Performance, 16-bit Digital Signal Controllers

Package:44 Pin TQFP
Operating Range:
* Up to 40 MIPS operation (at 3.0V -3.6V):
- Industrial temperature range (-40°C to +85°C)
- Extended temperature range (-40°C to +125°C)
High-Performance DSC CPU:
* Modified Harvard architecture
* C compiler optimized instruction set
* 16-bit wide data path
* 24-bit wide instructions
* Linear program memory addressing up to 4M instruction words
* Linear data memory addressing up to 64 Kbytes
* 83 base instructions: mostly 1 word/1 cycle
* Two 40-bit accumulators with rounding and saturation options
* Flexible and powerful addressing modes:
- Indirect
- Modulo
- Bit-Reversed
* Software stack
* 16 x 16 fractional/integer multiply operations
* 32/16 and 16/16 divide operations
* Single-cycle multiply and accumulate:
- Accumulator write back for DSP operations
- Dual data fetch
* Up to ±16-bit shifts for up to 40-bit data
Direct Memory Access (DMA):
* 8-channel hardware DMA
* Up to 2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA:
- Allows data transfer between RAM and a peripheral while CPU is executing code (no cycle stealing)
* Most peripherals support DMA
Timers/Capture/Compare/PWM:
* Timer/Counters, up to five 16-bit timers:
- Can pair up to make two 32-bit timers
- One timer runs as a Real-Time Clock with an external 32.768 kHz oscillator
- Programmable prescaler
* Input Capture (up to four channels):
- Capture on up, down or both edges
- 16-bit capture input functions
- 4-deep FIFO on each capture
* Output Compare (up to four channels):
- Single or Dual 16-bit Compare mode
- 16-bit Glitchless PWM mode
* Hardware Real-Time Clock/Calendar (RTCC):
- Provides clock, calendar, and alarm functions Interrupt Controller:
* 5-cycle latency
* Up to 53 available interrupt sources
* Up to three external interrupts
* Seven programmable priority levels
* Five processor exceptions
Digital I/O:
* Peripheral pin Select functionality
* Up to 35 programmable digital I/O pins
* Wake-up/Interrupt-on-Change for up to 31 pins
* Output pins can drive from 3.0V to 3.6V
* Up to 5V output with open drain configuration
* All digital input pins are 5V tolerant
* 4 mA sink on all I/O pins
On-Chip Flash and SRAM:
* Flash program memory (up to 128 Kbytes)
* Data SRAM (up to 16 Kbytes)
* Boot, Secure, and General Security for program Flash
System Management:
* Flexible clock options:
- External, crystal, resonator, internal RC
- Fully integrated Phase-Locked Loop (PLL)
- Extremely low jitter PLL
* Power-up Timer
* Oscillator Start-up Timer/Stabilizer
* Watchdog Timer with its own RC oscillator
* Fail-Safe Clock Monitor
* Reset by multiple sources
Power Management:
* On-chip 2.5V voltage regulator
* Switch between clock sources in real time
* Idle, Sleep, and Doze modes with fast wake-up
Analog-to-Digital Converters (ADCs):
* 10-bit, 1.1 Msps or 12-bit, 500 Ksps conversion:
- Two and four simultaneous samples (10-bit ADC)
- Up to nine input channels with auto-scanning
- Conversion start can be manual or synchronized with one of four trigger sources
- Conversion possible in Sleep mode
- ±2 LSb max integral nonlinearity
- ±1 LSb max differential nonlinearity
Audio Digital-to-Analog Converter (DAC):
- 16-bit Dual Channel DAC module
- 100 Ksps maximum sampling rate
- Second-Order Digital Delta-Sigma Modulator
Comparator Module:
* Two analog comparators with programmable input/output configuration CMOS Flash Technology:
* Low-power, high-speed Flash technology
* Fully static design
* 3.3V (±10%) operating voltage
* Industrial and Extended temperature
* Low power consumption
Motor Control Peripherals:
* 6-channel 16-bit Motor Control PWM:
- Three duty cycle generators
- Independent or Complementary mode
- Programmable dead-time and output polarity
- Edge-aligned or center-aligned
- Manual output override control
- One Fault input
- Trigger for ADC conversions
- PWM frequency for 16-bit resolution
(@ 40 MIPS) = 1220 Hz for Edge-Aligned mode, 610 Hz for Center-Aligned mode
- PWM frequency for 11-bit resolution (@ 40 MIPS) = 39.1 kHz for Edge-Aligned mode, 19.55 kHz for Center-Aligned mode
* 2-channel 16-bit Motor Control PWM:
- One duty cycle generator
- Independent or Complementary mode
- Programmable dead time and output polarity
- Edge-aligned or center-aligned
- Manual output override control
- One Fault input
- Trigger for ADC conversions
- PWM frequency for 16-bit resolution
(@ 40 MIPS) = 1220 Hz for Edge-Aligned mode, 610 Hz for Center-Aligned mode
- PWM frequency for 11-bit resolution (@ 40 MIPS) = 39.1 kHz for Edge-Aligned mode, 19.55 kHz for Center-Aligned mode
* 2-Quadrature Encoder Interface module:
- Phase A, Phase B, and index pulse input
- 16-bit up/down position counter
- Count direction status
- Position Measurement (x2 and x4) mode
- Programmable digital noise filters on inputs
- Alternate 16-bit Timer/Counter mode
- Interrupt on position counter rollover/underflow

Preview

VariantSymbolPackage

DSPIC33FJ64MC804-PT

Preview Preview
Copyright © 2015-2017 DIYmodules.org|Contact webmaster
Our website uses icons made by www.icondrawer.com