Facebook Official Page
Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
Search for EAGLE Library
ESP8266 LM2596 7805 7 SEGMENT POTENTIOMETER ARDUINO SWITCH ATMEGA RELAY 1N4007 LCD OLED 433 MHZ BLUETOOTH MODULE TO252 ARDUINO NANO ACS712 MOSFET POLOLU JST TRANSFORMER MURATA BATTERY SD CARD 315 MHZ PCB ANTENNA
Ohter interesting searches:
MICROCHIP GPS BLUETOOTH TRACO HIROSE USB TDA USB TYPE C CSR 40106 MICROCHIP TDA2005 7410 TEXAS ATX ALPS PIN HEADER PHOENIX BF INDUCTOR STM32F4 10K431 LM3886 PANASONIC CONNECTOR USB 3.0 PIN HEADER TERMINAL BLOCK
EAGLE Library Object
|Download options:||Download original file|
( 467.0 KiB )Download file converted
to the latest EAGLE format
( 467.0 KiB )
|Description:||8/16-bit XMEGA A4U Microcontroller|
Features High-performance, low-power Atmel® AVR® XMEGA® 8/16-bit Microcontroller Nonvolatile program and data memories – 16K - 128KBytes of in-system self-programmable flash – 4K - 8KBytes boot section – 1K - 2KBytes EEPROM – 2K - 8KBytes internal SRAM Peripheral Features – Four-channel DMA controller – Eight-channel event system – Five 16-bit timer/counters Three timer/counters with 4 output compare or input capture channels Two timer/counters with 2 output compare or input capture channels High-resolution extensions on all timer/counters Advanced waveform extension (AWeX) on one timer/counter – One USB device interface USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) device compliant 32 Endpoints with full configuration flexibility – Five USARTs with IrDA support for one USART – Two Two-wire interfaces with dual address match (I2C and SMBus compatible) – Two serial peripheral interfaces (SPIs) – AES and DES crypto engine – CRC-16 (CRC-CCITT) and CRC-32 (IEEE® 802.3) generator – 16-bit real time counter (RTC) with separate oscillator – One twelve-channel, 12-bit, 2mspsAnalog to Digital Converter – One two-channel, 12-bit, 1msps Digital to Analog Converter – Two Analog Comparators with window compare function, and current sources – External interrupts on all general purpose I/O pins – Programmable watchdog timer with separate on-chip ultra low power oscillator – QTouch® library support Capacitive touch buttons, sliders and wheels Special microcontroller features – Power-on reset and programmable brown-out detection – Internal and external clock options with PLL and prescaler – Programmable multilevel interrupt controller – Five sleep modes – Programming and debug interfaces PDI (program and debug interface) I/O and packages – 34 Programmable I/O pins – 44 - lead TQFP – 44 - pad VQFN/QFN – 49 - ball VFBGA Operating voltage – 1.6 – 3.6V Operating frequency – 0 – 12MHz from 1.6V – 0 – 32MHz from 2.7V