Facebook Official Page


Share EAGLE library

Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?




DIY Modules Eagle Library version 1.8.0 has been released.


DIY Modules Eagle Library version 1.7.0 has been released.


DIY Modules Eagle Library version 1.6.0 has been released.

More news...

EAGLE Library Structure

File details

File name:oldchips3.lbr
Uploaded by:jpelletier
Download options:Download original file
from DIYmodules.org
( 156.1 KiB )
Download file converted
to the latest EAGLE format
( 156.1 KiB )

Library description

This file has no description inside.
Below description of the library from CadSoft webpage:

A third batch of old chips and two multi io chips

List of devices

Name & variantsSymbolPackage
3765_DIP 3765 DIP40 Floppy Disk Controller



PreviewPreviewPreviewPreview Preview
3765_PLCC 3765 PLCC Floppy Disk Controller




PreviewPreviewPreviewPreview PreviewPreview



PreviewPreview Preview
9324 5-bit comparator



PreviewPreview Preview
PT6311 VFD Driver/Controller IC



PreviewPreviewPreviewPreview Preview
W83627HF Windbond W83627HF Multifunction chip for PC interface (ACPI, FDC, parallel, serial, keyboard, mouse, game port, MIDI port) Low Pin Count 128-pin TQFP

(From the spec sheet)

The disk drive adapter functions of W83627F/HF include a floppy disk drive controller compatible with the industry standard 82077/ 765, data separator, write pre-compensation circuit, decode logic, data rate selection, clock generator, drive interface control logic, and interrupt and DMA logic.

The wide range of functions integrated onto the W83627F/HF greatly reduces the number of components required for interfacing with floppy disk drives. The W83627F/HF supports four 360K, 720K, 1.2M, 1.44M, or 2.88M disk drives and data transfer rates of 250 Kb/s, 300 Kb/s, 500 Kb/s,1 Mb/s, and 2 Mb/s. The W83627F/HF provides two high-speed serial communication ports (UARTs), one of which supports serial Infrared communication. Each UART includes a 16-byte send/receive FIFO, a programmable baud rate generator, complete modem control capability, and a processor interrupt system. Both UARTs provide legacy speed with baud rate up to 115.2k bps and also advanced speed with baud rates of 230k, 460k, or 921k bps which support higher speed modems. In addition, the W83627F/HF provides IR functions: IrDA 1.0 (SIR for 1.152K bps) and TV remote IR (Consumer IR, supporting NEC, RC-5, extended RC-5, and RECS-80 protocols).

The W83627F/HF supports one PC-compatible printer port (SPP), Bi-directional Printer port (BPP) and also Enhanced Parallel Port (EPP) and Extended Capabilities Port (ECP). Through the printer port interface pins, also available are: Extension FDD Mode and Extension 2FDD Mode allowing one or two external floppy disk drives to be connected.

The configuration registers support mode selection, function enable/disable, and power down function selection. Furthermore, the configurable PnP features are compatible with the plug-and-play feature (TM) demand of Windows 95/98, which makes system resource allocation more efficient than ever.

The W83627F/HF provides functions that complies with ACPI (Advanced Configuration and Power Interface), which includes support of legacy and ACPI power management through PME# or PSOUT# function pins. For OnNow keyboard Wake-Up, OnNow mouse Wake-Up, and OnNow CIR Wake-Up. The W83627F/HF also has auto power management to reduce the power consumption. The keyboard controller is based on 8042 compatible instruction set with a 2K Byte programmable ROM and a 256-Byte RAM bank. Keyboard BIOS firmware are available with optional AMIKEY MultiKey/42(TM)- 2, Phoenix(TM), or customer code.

The W83627F/HF provides a set of flexible I/O control functions to the system designer through a set of General Purpose I/O ports. These GPIO ports may serve as simple I/O or may be individually configured to provide a predefined alternate function. General Purpose Port 1 is designed to be functional even in power down mode (VCC is off).

The W83627F/HF is made to fully comply with Microsoft PC98 and PC99 Hardware Design Guide. Moreover W83627F/HF is made to meet the specification of PC98/PC99's requirement in the power management: ACPI and DPM (Device Power Management). The W83627F/HF contains a game port and a MIDI port. The game port is designed to support 2 joysticks and can be applied to all standard PC game control devices, They are very important for an entertainment or consumer computer. Only the W83627HF support hardware status monitoring for personal computers. It can be used to monitor several critical hardware parameters of the system, including power supply voltages, fan speeds, and temperatures, which are very important for a high-end computer system to work stably and properly.



PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview Preview
W83977 Windbond W83977F/EF/EG multi IO chip



PreviewPreviewPreviewPreviewPreviewPreviewPreviewPreview Preview
Z84C15 Zilog Z84C15 in TQFP-100 package IPC Intelligent Peripheral Controller Includes Z80 CPU core, a CTC, 2 PIO and 2 SIO



PreviewPreviewPreviewPreviewPreviewPreviewPreview Preview

List of symbols

6311GR Preview
6311SG Preview
6311SPI Preview
6311SW Preview
8T28 Preview Non-inverting bus transceiver
9324 Preview
ACP_HM_PWR Preview ACPI interface, Hardware Monitor interface, Power
CTC Preview
DMA_IRQ Preview
FDC Preview FDC interface
FDC_3765 Preview
GAME_MIDI Preview Game port, MIDI port
GPIO6 Preview 6-bit GPIO
GPIO8 Preview GPIO
GPIO_83977 Preview
HOST Preview
HOST_3765 Preview
IV27M_LEFT Preview Left part of IV-27M VFD tube, 13 7-segment digits + */1
IV27M_RIGHT Preview
KBC Preview KBC interface
KBC_83977 Preview
LPC Preview LPC interface
PIO Preview
PWRN Preview
PWR_3765_DIP Preview
PWR_3765_PLCC Preview
SERIAL Preview Serial port
SIO Preview
VEE Preview

List of packages

DIL16 Preview Dual In Line
DIL40 Preview Dual In Line
IV-27M_LEFT Preview
PLCC-S44 Preview
PQFP52 Preview Plasic Quad Flat Package
SQFP-R-14X20-128 Preview QFP128 shrink quad flat pack, rectangle
TQFP100 Preview
Copyright © 2015-2017 DIYmodules.org|Contact webmaster
Our website uses icons made by www.icondrawer.com