Facebook Official Page


Share EAGLE library

Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?




DIY Modules Eagle Library version 1.8.0 has been released.


DIY Modules Eagle Library version 1.7.0 has been released.


DIY Modules Eagle Library version 1.6.0 has been released.

More news...

EAGLE Library Structure

File details

File name:netzer.lbr
Uploaded by:Sven Schlender
Download options:Download original file
from DIYmodules.org
( 7.7 KiB )
Download file converted
to the latest EAGLE format
( 20.5 KiB )

Library description

This library can be used to easily design Netzer based projects.

List of devices

Name & variantsSymbolPackage
NETZER Netzer from MoBaCon

The tiny ethernet module with common serial interfaces like UART, SPI or I2C and a few GPIOs.

Visit the Netzer project sites for more infos!



Preview Preview

List of symbols

NETZER Preview

List of packages

NETZER Preview Netzer R1.1 as package for Netzer based designs Consists of two 10 pol 2.54 mm pin headers. Netzer supply and Reset Netzer is supplied via the 3V3 pin and the GND pin. The voltage should be in between 3.1 V and 3.6 V. Decoupling and buffering capacities are not needed. Grounding this pin resets Netzer, a short impulse awakes Netzer from sleep (after a shut down). Leave the pin open if not needed. No pullups are required. Power over Ethernet (PoE, IEEE802.3af) The Poe-Pins VA1 and VA2 or VB1 and VB2 deliver the PoE-Voltage 48V directly from the Ethernet cable. It depends on the power supply which pairs carry the voltage. Connect a PoE conform DC/DC converter here. Netzer IO Here is a short overview over the 13 available pins of Netzer Rev 1.1. Netzer NamePIC PinMaximum output currentMaximum input voltageDescription SPI_INTRC225 mA5.5 VInterrupt pin of the SPI module (only used in SPI slave mode) - PWM output SPI_CLKRC325 mA5.5 VClock line of the SPI module SPI_MIRC425 mA5.5 VData input of the SPI module SPI_MORC525 mA5.5 VData output of the SPI module SPI_CSRF72 mA5.5 VSelect line of the SPI module (only used in SPI slave mode) RXRC725 mA5.5 VUART Receive line TXRC625 mA5.5 VUART Transmit line IO0RB025 mA5.5 VInterrupt input IO1RB125 mA5.5 VInterrupt input IO2RB225 mA5.5 VInterrupt input IO3RD18 mA5.5 VPWM output IO4RA22 mA3.3 VADC input IO5RA32 mA3.3 VADC input
Copyright © 2015-2017 DIYmodules.org|Contact webmaster
Our website uses icons made by www.icondrawer.com