Share EAGLE library
Have you created EAGLE library?
Did you find an interesting library?
Why not share with the community?
News
DIY Modules Eagle Library version 1.8.0 has been released.
DIY Modules Eagle Library version 1.7.0 has been released.
DIY Modules Eagle Library version 1.6.0 has been released.
- Home
- Seach Engine for EAGLE Libraries
Search Engine for EAGLE Libraries
Search
Specify what you are looking for:
Results
59 results found:
| Device / variant | Symbol | Package | Action | |
|---|---|---|---|---|
device: AC-VOLTAGE-SENSOR library: diy-modules.lbr | Isolated AC Voltage Sensor based on ZMPT101B transformer ZMPT101B Voltage Transformer Operating Guide is available here: http://www.zeming-e.com/file/0_2013_10_18_093344.pdf Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: AC-VOLTAGE-SENSOR  | package: AC-VOLTAGE-SENSOR  | Show Device | |
device: AC-VOLTAGE-SENSOR#IC library: diy-modules.lbr | Isolated AC Voltage Sensor based on ZMPT101B transformer Symbol with input connector ZMPT101B Voltage Transformer Operating Guide is available here: http://www.zeming-e.com/file/0_2013_10_18_093344.pdf Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: AC-VOLTAGE-SENSOR#IC  | package: AC-VOLTAGE-SENSOR#IC  | Show Device | |
device: ADC-4CH-ADS1115 library: diy-modules.lbr | 4 Channel 16-Bit Analog-to-Digital Converter based on ADS1115 chip Arduino ADS1115 Getting Started Tutorial is available here: http://henrysbench.capnfatz.com/henrys-bench/arduino-voltage-measurements/arduino-ads1115-module-getting-started-tutorial/ ADS1115 datasheet is available here: http://www.ti.com/lit/ds/symlink/ads1115.pdf Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: ADC-4CH-ADS1115  | package: ADC-4CH-ADS1115  | Show Device | |
device: ADC-DAC-PCF8591 library: diy-modules.lbr | 4-Channel ADC and 1-Channel DAC Module based on PCF8591 chip More details available here: https://brainfyre.wordpress.com/2012/10/25/pcf8591-yl-40-ad-da-module-review/ Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: ADC-DAC-PCF8591  | package: ADC-DAC-PCF8591  | Show Device | |
device: ARDUINO_CONN-ANALOG library: arduino_jw.lbr | Arduino Analog I/O Header This is the analog I/O header on the Arduino Uno R3. This connector is labeled with the following pin assignments: Analog 0 Analog 1 Analog 2 Analog 3 Analog 4 Analog 5 NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. | Download NowShow Library | ||
variants: | symbol: ANALOG  | package: CONN-1X06  | Show Device | |
device: ARDUINO_CONN-ICSP library: arduino_jw.lbr | Arduino ICSP I/O Header This is the ICSP I/O header on the Arduino Uno R3. This connector is labeled with the following pin assignments: MISO +5V SCK MOSI RESET GND NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. | Download NowShow Library | ||
variants: | symbol: ISCP  | package: CONN-2X03  | Show Device | |
device: ARDUINO_CONN-IO_H library: arduino_jw.lbr | Arduino Digital I/O [High Byte] Header This is the Digital I/O [high byte] header on the Arduino Uno R3. This connector is labeled with the following pin assignments: Digital 8 Digital 9 [PWM] Digital 10 [PWM] Digital 11 [PWM] Digital 12 Digital 13 GND AREF SDA SCL NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. | Download NowShow Library | ||
variants: | symbol: I/O_H  | package: CONN-1X10  | Show Device | |
device: ARDUINO_CONN-IO_L library: arduino_jw.lbr | Arduino Digital I/O [Low Byte] Header This is the Digital I/O [low byte] header on the Arduino Uno R3. This connector is labeled with the following pin assignments: Digital 0, Serial Rx Digital 1, Serial Tx Digital 2 Digital 4 Digital 5 [PWM] Digital 6 [PWM] Digital 7 NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. | Download NowShow Library | ||
variants: | symbol: I/O_L  | package: CONN-1X08  | Show Device | |
device: ARDUINO_CONN-POWER library: arduino_jw.lbr | Arduino Power Header This is the power header on the Arduino Uno R3. This connector is labeled with the following pin assignments: n/c IO Ref RESET +3.3V +5V GND GND VIN NOTE: Be sure you install this connector with the correct orientation on your PCB layout. Pin 1 has a square pad to assist with orientation. | Download NowShow Library | ||
variants: | symbol: POWER  | package: CONN-1X08 | Show Device | |
device: ARDUINO_DUE_SHIELD library: arduino_due_shield.lbr | Download NowShow Library | |||
variants: | symbol: ARDUINO_DUE_SHIELD  | package: ARDUINO_DUE_SHIELD  | Show Device | |
device: ARDUINO_LEONARDO library: srg.lbr | Arduino Leonardo I2C Pins: D2, D3 PWM Pins: D3, D5, D5, D11, D13 Interrup Pint: D2, D3 http://arduino.cc/en/Main/arduinoBoardLeonardo | Download NowShow Library | ||
variants: | symbol: ARDUINO_LEONARDO  | package: ARDUINO_LEONARDO  | Show Device | |
device: ARDUINO_NANO library: ArduinoNano/ArduinoNanoV30.lbr | Arduino Nano V3.0 Overview: The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech. Specifications: Microcontroller Atmel ATmega168 or ATmega328 ... | Download NowShow Library | ||
variants: | symbol: ARDUINO_NANO  | package: ARDUINO_NANO  | Show Device | |
device: ARDUINO_NANO2 library: arduino.lbr | Arduino Nano2 Auto generated by modulcreator.ulp \; | Download NowShow Library | ||
variants: | symbol: ARDUINO_NANO2  | package: ARDUINO_NANO2  | Show Device | |
device: ARDUINO_PRO_MINI library: arduinopromini.lbr | For creating Arduino Pro Mini shields | Download NowShow Library | ||
variants: | symbol: ARDUINO_PRO_MINI  | package: ARDUINO_PRO_MINI  | Show Device | |
device: ARDUINO_PRO_MINI library: srg.lbr | Arduino Pro-Mini Made by Sparkfun Comes in 3.3 volt and 5 volt versions Note: A6 & A7 are analog in only | Download NowShow Library | ||
variants: | symbol: ARDUINO_PRO_MINI  | package: ARDUINO_PRO_MINI  | Show Device | |
device: ARDUINO-NANO-3.0 library: diy-modules.lbr | Arduino Nano 3.0 and compatible devices More details available here: https://www.arduino.cc/en/Main/ArduinoBoardNano Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: ARDUINO-NANO-3.0  | package: ARDUINO-NANO-3.0  | Show Device | |
device: ARDUINO-NANO-3.0#ISP library: diy-modules.lbr | Arduino Nano 3.0 (and compatible devices) with ISP pads More details available here: https://www.arduino.cc/en/Main/ArduinoBoardNano Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: ARDUINO-NANO-3.0#ISP  | package: ARDUINO-NANO-3.0#ISP  | Show Device | |
device: ARDUINO-PRO-MINI-* library: diy-modules.lbr | Arduino Pro Mini and compatible devices More details available here: https://www.arduino.cc/en/Main/ArduinoBoardProMini Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: ARDUINO-PRO-MINI  | package: ARDUINO-PRO-MINI  | Show Device | |
device: ARDUINO-PRO-MINI-*#APC library: diy-modules.lbr | Arduino Pro Mini (and compatible devices) with angle programming connector More details available here: https://www.arduino.cc/en/Main/ArduinoBoardProMini Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: ARDUINO-PRO-MINI#NP  | package: ARDUINO-PRO-MINI#APC  | Show Device | |
device: ARDUINO-PRO-MINI-*#NP library: diy-modules.lbr | Arduino Pro Mini (and compatible devices) without programming pads More details available here: https://www.arduino.cc/en/Main/ArduinoBoardProMini Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: ARDUINO-PRO-MINI#NP | package: ARDUINO-PRO-MINI#NP  | Show Device | |
device: ARDUINO-PRO-MINI-*#SMP library: diy-modules.lbr | Arduino Pro Mini (and compatible devices) with 2 connectors only More details available here: https://www.arduino.cc/en/Main/ArduinoBoardProMini Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: ARDUINO-PRO-MINI#SMP  | package: ARDUINO-PRO-MINI#SMP  | Show Device | |
device: ARDUINO2009_1 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009  | package: ARDUINO2009  | Show Device | |
device: ARDUINO2009_1 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009 | package: ARDUINO2009_1  | Show Device | |
device: ARDUINO2009_1 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009 | package: ARDUINO2009_2  | Show Device | |
device: ARDUINO2009_2 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUNIO2009_1  symbol: PWR5V  symbol: PWR3V3  symbol: PWRVIN  | package: ARDUINO2009 | Show Device | |
device: ARDUINO2009_2 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUNIO2009_1 symbol: PWR5V symbol: PWR3V3 symbol: PWRVIN | package: ARDUINO2009_1 | Show Device | |
device: ARDUINO2009_2 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUNIO2009_1 symbol: PWR5V symbol: PWR3V3 symbol: PWRVIN | package: ARDUINO2009_2 | Show Device | |
device: ARDUINO2009_PIN_1 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009_PIN  | package: ARDUINO2009 | Show Device | |
device: ARDUINO2009_PIN_1 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009_PIN | package: ARDUINO2009_1 | Show Device | |
device: ARDUINO2009_PIN_1 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009_PIN | package: ARDUINO2009_2 | Show Device | |
device: ARDUINO2009_PIN_2 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009_PIN_1  symbol: PWR5V symbol: PWR3V3 symbol: PWRVIN | package: ARDUINO2009 | Show Device | |
device: ARDUINO2009_PIN_2 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009_PIN_1 symbol: PWR5V symbol: PWR3V3 symbol: PWRVIN | package: ARDUINO2009_1 | Show Device | |
device: ARDUINO2009_PIN_2 library: arduino.lbr | The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega168 or ATmega328. - 14 digital input/output pins (of which 6 can be used as PWM outputs) - 6 analog inputs, a 16 MHz crystal oscillator - USB connection - power jack - ISP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started http://arduino.cc/en/Main/ArduinoBoardDuemilanove | Download NowShow Library | ||
variants: | symbol: ARDUINO2009_PIN_1 symbol: PWR5V symbol: PWR3V3 symbol: PWRVIN | package: ARDUINO2009_2 | Show Device | |
device: BOARD_ARDUINO-MEGA library: Clean-Kong.lbr | Download NowShow Library | |||
variants: | symbol: ARDUINO-MEGA  | package: BOARD_ARDUINO_MEGA  | Show Device | |
device: BOARD_ARDUINO-NANO library: Clean-Kong.lbr | Download NowShow Library | |||
variants: | symbol: ARDUINO-NANO  | package: BOARD_ARDUINO_NANO  | Show Device | |
device: CARD-SD-ADAPTER library: diy-modules.lbr | Full Size SD Card Adapter Module with onboard 3.3V regulator Guide describing how to use SD card with Arduino is available here: https://www.arduino.cc/en/Reference/SDCardNotes Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: CARD-SD-ADAPTER  | package: CARD-SD-ADAPTER  | Show Device | |
device: DATA-LOGGER-MINI library: diy-modules.lbr | Mini Data Logger with microSD card and battery powered RTC based on DS1307 chip Arduino library for DS1307 and description are available here: https://www.pjrc.com/teensy/td_libs_DS1307RTC.html Tutorial how to use SD card with Arduino: https://www.arduino.cc/en/reference/SD Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: DATA-LOGGER-MINI  | package: DATA-LOGGER-MINI  | Show Device | |
device: DISPLAY-NOKIA-3310 library: diy-modules.lbr | 84x48 Dot Matrix LCD Module based on Nokia 3310 display More details available here: https://arduinoandsoftware.wordpress.com/2012/12/30/nokia-33105110-3-3v-display-with-5v-arduino/ | Download NowShow Library | ||
variants: | symbol: DISPLAY-NOKIA-3310  | package: DISPLAY-NOKIA-3310  | Show Device | |
device: DISPLAY-OLED-128X64 library: diy-modules.lbr | 128x64 Dot Matrix OLED Module based on SSD1306 chip Variant with SPI interface More details available here: http://www.instructables.com/id/How-to-use-OLED-display-arduino-module/ SSD1306 datasheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf Click here to find device on ebay.com Note: There are two variants: I2C and SPI. Search for the proper version. | Download NowShow Library | ||
variants: | symbol: DISPLAY-OLED-128X64  | package: DISPLAY-OLED-128X64  | Show Device | |
device: DISPLAY-OLED-128X64-I2C library: diy-modules.lbr | 128x64 Dot Matrix OLED Module based on SSD1306 chip Variant with I2C interface More details available here: http://www.instructables.com/id/Monochrome-096-i2c-OLED-display-with-arduino-SSD13/ SSD1306 datasheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf Click here to find device on ebay.com Note: There are two variants: I2C and SPI. Search for the proper version. | Download NowShow Library | ||
variants: | symbol: DISPLAY-OLED-128X64-I2C  | package: DISPLAY-OLED-128X64-I2C  | Show Device | |
device: FLAME-DETECTOR library: diy-modules.lbr | Flame Detector Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: FLAME-DETECTOR  | package: FLAME-DETECTOR  | Show Device | |
device: GAS-SENSOR-MQ2 library: diy-modules.lbr | Gas Sensor based on MQ-2 device Guide describing how to use MQ-2 sensor with Arduino is available here: http://www.instructables.com/id/How-to-use-MQ2-Gas-Sensor-Arduino-Tutorial/ MQ-2 sensor datasheet is available here: http://gas-sensor.ru/pdf/combustible-gas-sensor.pdf Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: GAS-SENSOR-MQ2  | package: GAS-SENSOR-MQ2  | Show Device | |
device: GPS-RECEIVER-NEO6M library: diy-modules.lbr | GPS Receiver Module based on NEO-6 device Short tutorial how to use NEO-6 module with Arduino: http://www.xarg.org/2016/06/neo6mv2-gps-module-with-arduino/ NEO-6 datasheet is available here: https://www.u-blox.com/sites/default/files/products/documents/NEO-6_DataSheet_%28GPS.G6-HW-09005%29.pdf Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: GPS-RECEIVER-NEO6M  | package: GPS-RECEIVER-NEO6M  | Show Device | |
device: JOYSTICK-2AXIS-BUTTON library: diy-modules.lbr | 2-Axis Analog Joystick with Push Button Tutorial is available here: http://henrysbench.capnfatz.com/henrys-bench/arduino-sensors-and-input/arduino-ps2-joystick-tutorial-keyes-ky-023-deek-robot/ Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: JOYSTICK-2AXIS-BUTTON  | package: JOYSTICK-2AXIS-BUTTON  | Show Device | |
device: LIGHT-SENSOR-BH1750 library: diy-modules.lbr | Digital Light Sensor based on BH1750 BH1750 datasheet is available here: http://www.mouser.com/ds/2/348/bh1750fvi-e-186247.pdf Arduino Library for BH1750 is available here: https://github.com/claws/BH1750 Video Tutorial is available here: https://www.youtube.com/watch?v=UsLcHSbxf_8 Click here to find device on ebay.com Note: There are many variants. Search for the proper version. | Download NowShow Library | ||
variants: | symbol: LIGHT-SENSOR-BH1750  | package: LIGHT-SENSOR-BH1750  | Show Device | |
device: MEGAARDUINO_1 library: arduino.lbr | The Arduino Mega is a microcontroller board based on the ATmega1280. - 54 digital input/output pins (of which 14 can be used as PWM outputs) - 16 analog inputs - 4 UARTs (hardware serial ports) - 16 MHz crystal oscillator - USB connection - power jack - ICSP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields ... | Download NowShow Library | ||
variants: | symbol: MEGAARDUINO_1  | package: MEGA_ARDUINO  | Show Device | |
device: MEGAARDUINO_1 library: arduino.lbr | The Arduino Mega is a microcontroller board based on the ATmega1280. - 54 digital input/output pins (of which 14 can be used as PWM outputs) - 16 analog inputs - 4 UARTs (hardware serial ports) - 16 MHz crystal oscillator - USB connection - power jack - ICSP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields ... | Download NowShow Library | ||
variants: | symbol: MEGAARDUINO_1 | package: MEGA_ARDUINO_1  | Show Device | |
device: MEGAARDUINO_1 library: arduino.lbr | The Arduino Mega is a microcontroller board based on the ATmega1280. - 54 digital input/output pins (of which 14 can be used as PWM outputs) - 16 analog inputs - 4 UARTs (hardware serial ports) - 16 MHz crystal oscillator - USB connection - power jack - ICSP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields ... | Download NowShow Library | ||
variants: | symbol: MEGAARDUINO_1 | package: MEGA_ARDUINO_2  | Show Device | |
device: MEGAARDUINO_2 library: arduino.lbr | The Arduino Mega is a microcontroller board based on the ATmega1280. - 54 digital input/output pins (of which 14 can be used as PWM outputs) - 16 analog inputs - 4 UARTs (hardware serial ports) - 16 MHz crystal oscillator - USB connection - power jack - ICSP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields ... | Download NowShow Library | ||
variants: | symbol: MEGAARDUINO_2  symbol: PWR5V symbol: PWR3V3 symbol: PWRVIN | package: MEGA_ARDUINO | Show Device | |
device: MEGAARDUINO_2 library: arduino.lbr | The Arduino Mega is a microcontroller board based on the ATmega1280. - 54 digital input/output pins (of which 14 can be used as PWM outputs) - 16 analog inputs - 4 UARTs (hardware serial ports) - 16 MHz crystal oscillator - USB connection - power jack - ICSP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields ... | Download NowShow Library | ||
variants: | symbol: MEGAARDUINO_2 symbol: PWR5V symbol: PWR3V3 symbol: PWRVIN | package: MEGA_ARDUINO_1 | Show Device | |
device: MEGAARDUINO_2 library: arduino.lbr | The Arduino Mega is a microcontroller board based on the ATmega1280. - 54 digital input/output pins (of which 14 can be used as PWM outputs) - 16 analog inputs - 4 UARTs (hardware serial ports) - 16 MHz crystal oscillator - USB connection - power jack - ICSP header - reset button It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields ... | Download NowShow Library | ||
variants: | symbol: MEGAARDUINO_2 symbol: PWR5V symbol: PWR3V3 symbol: PWRVIN | package: MEGA_ARDUINO_2 | Show Device | |
device: PANSTAMP library: srg.lbr | panStamp panStamps are small wireless modules programmable from the Arduino IDE. Each module contains an Atmega328p MCU and a Texas Instruments CC1101 RF interface, providing the necessary connectivity and processing power to create autonomous low-power wireless motes. Everything contained into a compact DIP-24 module. http://www.panstamp.com Vin: 2.5 to 3.6 volts A4 - SDA A5 - SCL PWM: D3,5,6,9,10,11 Interrupts: D2,3 | Download NowShow Library | ||
variants: | symbol: PANSTAMP  | package: PANSTAMP  | Show Device | |
device: PWM-SERVO-DRIVER-16CH library: diy-modules.lbr | 16-Channel 12-bit PWM/Servo Driver based on PCA9685 chip PCA9685 datasheet is available here: http://www.nxp.com/documents/data_sheet/PCA9685.pdf Arduino Library for PCA9685 is available here: https://github.com/kasperskaarhoj/PCA9685-Arduino-Library Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: PWM-SERVO-DRIVER-16CH  | package: PWM-SERVO-DRIVER-16CH  | Show Device | |
device: RANGING-SENSOR-VL53L0X library: diy-modules.lbr | Laser Ranging Sensor based on VL53L0X device More information about VL53L0X device can be found here: http://www.st.com/en/imaging-and-photonics-solutions/vl53l0x.html Arduino Library for VL53L0X is available here: https://github.com/pololu/vl53l0x-arduino Click here to find device on ebay.com Note: There are many variants. Search for the proper version. | Download NowShow Library | ||
variants: | symbol: RANGING-SENSOR-VL53L0X  | package: RANGING-SENSOR-VL53L0X  | Show Device | |
device: RTC-EEPROM-BATTERY library: diy-modules.lbr | RTC Module with Battery and EEPROM based on DS1307 and AT24C32 chips More details available here: http://henrysbench.capnfatz.com/henrys-bench/arduino-sensors-and-input/arduino-tiny-rtc-d1307-tutorial/ Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: RTC-EEPROM-BATTERY  | package: RTC-EEPROM-BATTERY  | Show Device | |
device: SOIL-MOISTURE-SENSOR library: diy-modules.lbr | Soil Moisture Sensor Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: SOIL-MOISTURE-SENSOR  | package: SOIL-MOISTURE-SENSOR  | Show Device | |
device: USB-SERIAL-FT232R library: diy-modules.lbr | USB to Serial UART Converter based on FT232R chip More information about FT232R chip is available here: http://www.ftdichip.com/Products/ICs/FT232R.htm Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: USB-SERIAL-FT232R  | package: USB-SERIAL-FT232R  | Show Device | |
device: WIRELESS-BLUETOOTH-HC-05 library: diy-modules.lbr | Bluetooth Transceiver Module based on HC-05 board Tutorial is available here: https://arduino-info.wikispaces.com/BlueTooth-HC05-HC06-Modules-How-To Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: WIRELESS-BLUETOOTH-HC-05  | package: WIRELESS-BLUETOOTH-HC-05  | Show Device | |
device: WIRELESS-NRF24L01 library: diy-modules.lbr | 2.4 GHz Wireless Module based on NRF24L01 chip More details available here: http://www.electrodragon.com/w/NRF24L01 Click here to find device on ebay.com | Download NowShow Library | ||
variants: | symbol: WIRELESS-NRF24L01  | package: WIRELESS-NRF24L01  | Show Device | |